Impact Rolls

 Introducing our Impact Rolls, the bouncy castle of gym flooring! Perfect for those who want to add some extra spring to their workouts, these rolls offer the shock absorption you need for high-impact exercises. And, just like a bouncy castle, they're highly slip-resistant, making them great for outdoor use too. But, unlike a bouncy castle, they're not recommended for areas with heavy equipment unless you want to be jumping over it like a ninja warrior. Plus, with a 5-year warranty, you can trust that these rolls will keep the fun bouncing for years to come!

Recommended Uses: Impact-rolled rubber flooring is a perfect solution for high-impact workouts and plyometric training. It is ideal for use in gyms, fitness studios, and home exercise rooms where regular jumping and other high-impact exercises are performed. The extra shock absorption provided by the Impact rolled rubber flooring helps prevent leg fatigue and injury, making it an excellent choice for athletes and fitness enthusiasts alike.

• First, clean your subfloor so that it is free of all dust, dirt, and debris.
• Loose lay your rolls in the room as you would like them to look after complete installation. Let the rolls relax for 24-48 hours to ensure the proper installation of your new flooring.
• Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches.
• Make any necessary cuts to the rolls to fit them into the room using a straight edge and a utility knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
• Roll up the rolls at one end of the room. Apply double-sided tape to the floor along the perimeter of each roll.
• Place the rubber rolls back into position on top of the double-sided tape.

• First, clean your subfloor so that it is free of all dirt, dust, and debris. Also, when gluing your flooring down, it is recommended that the subfloor is free of any moisture.
• Loose lay your rolls in the room as you would like them to look after complete installation. Let the rolls relax for 24-48 hours to ensure the proper installation of your new flooring.
• Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches.
• Make any necessary cuts to the rolls to fit them into the room using a straight edge and a utility knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
• Roll up the rolls at one end of the room. Spread a light layer of polyurethane adhesive that is 10’ long (maximum) and unroll the flooring into the adhesive 10’ at a time.
• Repeat this step for every 10’ of roll length until the entire roll has been unrolled into its desired position.
• After all of the rolls have been glued down, it is often recommended to use a 100-pound roller on the floor to guarantee good adherence to the subfloor. If a roller is not available, walking on the flooring in small choppy steps may also work.

• Vacuum loose dust, dirt, or debris from the rubber flooring surface when necessary.
• Occasionally damp mop the plyometric matting with a mild soap and water mixture. Recommended soaps include Dawn dish detergent and/or Tide laundry detergent.
• Impact rolled rubber flooring is slightly porous to aid in shock absorption, which means it may take slightly more time to clean than our regular rolled rubber gym flooring.