3/8" Heavy Duty Rubber Rolls | Premium Commercial Gym Flooring

More Information

Our heavy-duty, commercial-grade rubber flooring is the highest quality gym flooring available, designed for extreme durability. Proudly made in the USA from recycled tires, these premium 4-foot wide rubber rolls are ideal for both commercial weight rooms and home gyms. They are machine-cut for precision and can be easily installed indoors or outdoors.

These high-quality rubber flooring rolls provide superior impact resistance, protecting your floors from the wear and tear of free weights, treadmills, stationary bikes, steppers, and other exercise equipment. Durable and built to last, the rubber rolls are easy to clean and maintain.

Rubber flooring rolls can be custom cut to any length; however, please note that there is a 15-foot minimum cut length for all orders.

Recommended Uses: Heavy Duty Rubber Rolls have been used successfully as home gym flooring, commercial weight room flooring, under exercise equipment, in pet care facilities, as basement flooring, over radiant heated flooring systems, on outdoor patios and decks, as slip-resistant flooring on boat docks, as children's playroom flooring, in locker rooms, and any other place where a rubber floor solution would be useful to help prevent slipping and provide anti-fatigue and sound control qualities.

Quick Notes:
• Confetti and Natural colors are made from post-industrial recycled rubber, so some color and shade variation is natural and expected. Confetti blends may skew toward neutral tones like grays depending on the production run.
• Your order may include a few extra inches of material. This is intentional — it accounts for cutting tolerances and natural expansion, so your roll or mat is never undersized.
• Orders totaling over 1,000 sq. ft. may require additional processing time before shipping.

Details

InstallationTemporary or Semi-Permanent, Permanent
Installation LocationOutdoor

Care and Maintenance Document

Warranty

When installing rolled rubber flooring, it is important to choose the right installation method for your project. The most common methods of adhering rubber rolls to the subfloor are:

A: Double-Sided Tape Installation

Ensure that the subfloor is clean, dry, and free of any debris.
Loosely lay the rubber rolls in the room to achieve your desired layout. Allow the rolls to relax for 24-48 hours to ensure proper installation.
Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches.
Cut the rubber rolls to fit the room using a straight edge and a utility knife with a fresh blade. Leave a gap around the perimeter roughly the thickness of the rolls being used to account for expansion and contraction.
Roll up the rubber rolls at one end of the room. Apply double-sided tape to the subfloor along the perimeter of each roll.
Place the rubber rolls back into position on top of the double-sided tape.

B: Glue Installation

Ensure that the subfloor is clean, dry, and free of any debris or moisture.
Loosely lay the rubber rolls in the room to achieve your desired layout. Allow the rolls to relax for 24-48 hours to ensure proper installation.
Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches.
Cut the rubber rolls to fit the room using a straight edge and a utility knife with a fresh blade. Leave a gap around the perimeter roughly the thickness of the rolls being used to account for expansion and contraction.
Roll up the rubber rolls at one end of the room. Spread a light layer of polyurethane adhesive that is 10 feet long (maximum) and unroll the flooring into the adhesive 10 feet at a time.
Repeat step 5 for every 10 feet of roll length until the entire roll has been unrolled into its desired position.
After all of the rolls have been glued down, it is recommended to use a 100-pound roller on the floor to guarantee good adherence to the subfloor. If a roller is not available, walking on the flooring in small choppy steps may also work.

Care and Maintenance Document

Warranty

Keeping your Heavy Duty Rubber Rolls clean and looking their best is easy with these simple maintenance tips:

Sweep or vacuum loose debris regularly to prevent buildup and minimize the risk of slips and falls.
For a deeper clean, simply damp mop the rubber rolls with a mild soap and water solution. We recommend using Dawn dish detergent or Tide laundry detergent.
Do not use any solvent or oil-based cleaners like Pinesol, Lysol, Murphy's Oil Soap, WD40, paint thinner, or similar products. These cleaners can break down the flooring over time and cause damage.

Care and Maintenance Document

Warranty

5-year warranty on standard colors. 25-year warranty on Biggie Smallz™ colors.

Care and Maintenance Document

Warranty

Reviews

Questions

Customer Questions And Answer

The best way to cut our 3/8" Heavy Duty Rubber Rolls is with a sharp utility knife and a straight edge. We recommend doing a scoring pass, before starting your actual cut. This will make cutting the roll easier.

Our 3/8" Heavy Duty Rubber Rolls are resistant to mold and mildew growth. The only time mold would ground it if there were foot stuck on the floor.

Our 3/8" Heavy Duty Rubber Rolls can be used in the aisles of a horse barn.

All of our rubber thicknesses are good for home gyms. For most home gyms where no heavy weight is being dropped, we recommend going with our 8mm thickness. For gyms where some heavy weights will be dropped, we suggest going with our 3/8" rubber. This is the most common thickness found in commercial gyms. Our 1/2" thickness is typical for anyone who is wanting to do any Olympic lifting. This will ensure that when weights are dropped from overhead, the subfloor won't be damaged. All thicknesses...

Our 3/8" Heavy Duty Rubber Rolls are very easy to clean. For dirt we suggest using a broom or vacuum. When mopping the rolls, we suggest using a synthetic mop head with a mild soap and water solution.

You can park a car on our 3/8" and 1/2" rubber rolls, but if your car leaks oil, the roll will start to break down over time. Most other vehicle chemicals will not affect the flooring in this manner.

Our 3/8" Heavy Duty Rubber Rolls can be used in a woodworking workshop where there are stationary machines on movable bases. Our heavy duty rubber rolls are made to be used in commercial gyms where heavy fitness equipment will be on the floor. This equipment can be stationary or moveable. So, it will be able to withstand any abuse in a workshop.

You can use a hard floor steam cleaner on our 3/8" Heavy Duty Rubber Rolls. That is the best way to clean our floor. If you don't have a steamer, you can also use a synthetic mop with a mild soap and water solution.

Our 3/8" Heavy Duty Rubber Rolls would work perfectly for a home gym where low to mid-impact aerobics exercises are performed. This roll is commonly used in commercial gyms like LA Fitness, Gold's and the like and is our most popular rubber roll.

A vapor barrier is not necessary when installing our 3/8" Heavy Duty Rubber Rolls.

Depending on your application, there are a few ways you can install our 3/8" Heavy Duty Rubber Rolls. For most basement installations of our rubber flooring, simply rolling the rubber rolls out with no glue or tape is typically sufficient. This allows you to pick up the rolls in the instance there is a major flood. If for some reason the rubber rolls do move at all, you can put down some double-sided tape to keep them in place.

Our 3/8" Heavy Duty Rubber Rolls are not vulcanized and would have small pores in the flooring. These pores are not very large and typically do not trap dirt and debris. If you are looking for something that is non-porous, you will want to look at our vulcanized tiles and mats. These don't have those small pores and would ensure that no dirt and debris gets trapped in the flooring.

You can use our 3/8" Heavy Duty Rubber Rolls outdoors under a swing set. The rolls will help to protect the ground under the swing set from being destroyed. Our rubber flooring is very slip-resistant and is more so when wet. Our rubber rolls are also mold and mildew resistant. The only thing you will notice while having this rubber roll outdoors is that it will fade a bit in direct sunlight.

Our 3/8" Heavy Duty Rubber Rolls can be installed over carpet. As long as that carpet is a low pile or commercial carpet. The rolls can still be placed over a high pile carpet, but due to the carpet pad underneath, you may get separation of the rolls which can cause a tripping hazard.

Our 3/8" Heavy Duty Rubber Rolls can contain a very low level of latex. These rolls are made from recycled truck tire treads, and if any of the rubber were to be natural rubber, there is potential for the allergen to be present.

Our 3/8" Heavy Duty Rubber Rolls can be installed over most hardwood floors without damaging them. If there is concern that the rubber will damage the flooring, we recommend placing a plastic sheet between the rubber and the hardwood floor.

Our 3/8" Heavy Duty Rubber Rolls are pretty heavy and typically will not slip on their own. If they do, we recommend using double-sided tape or adhesive to keep them in place.

Our 3/8" Heavy Duty Rubber Rolls are not vulcanized.

Our 3/8" Heavy Duty Rubber Rolls are held together by a binder that can be broken down by petroleum based products. Over time, these petroleum based products will break the binder down enough for the floor to start to break down and flake. This process is not an immediate one, but over time the floor would be ruined. In areas where there will be some petroleum products that will fall on the floor, we would suggest putting a plastic sheeting down if possible to protect the floor.

You can install our 3/8" Heavy Duty Rubber Rolls over low pile commercial carpet with ease. No tape would be needed for the seams. Our rubber rolls can be installed over high pile carpet, but there may be some separation of the rolls due to the carpet underneath getting depressed.

Our 3/8" Heavy Duty Rubber Rolls were made with heavy gym equipment being on them in mind. So, chairs ar totally fine on this floor.

You can drive snowmobiles, quads, dirt bikes, and any other vehicle over our 3/8" Heavy Duty Rubber Rolls without destroying the roll.

There can be a slight odor to our 3/8" Heavy Duty Rubber Rolls. To help mitigate this odor, we recommend mopping the floor with a mild soap and water solution and letting the floor air dry. You may have to do this process a few times to fully remove the smell.

We don't have a specific timeframe as to when the rubber will finish off-gassing, but to help mitigate the smell of our 3/8" Heavy Duty Rubber Rolls, you will want to clean it with a mild soap and water solution and let it air dry in a well-ventilated space. You may need to repeat this process a few times to eliminate the smell.

Cycles will not sink into our 3/8" Heavy Duty Rubber Rolls. These rubber rolls are very dense and will create a solid, comfortable flooring surface for indoor cycles. Our rubber flooring has been used in both commercial and residential gyms successfully and even in cycle studios all over the country.

Our 3/8" Heavy Duty Rubber Rolls can help reduce the amount of sound that is transmitted by your treadmill. It's not the best product for this, but definitely can be used for this function. To truly reduce noise transmission, we recommend using Shock Mat or Shock Tiles. Both of these products are designed to reduce the transmission of noise from floor to floor.

Our 3/8" Heavy Duty Rubber Rolls do not have a textured side for added grip. Rubber flooring is very slip-resistant on its own, so there is no need for it to have a grippy side. The weight of the roll keeps it from moving. If for some reason a roll were to move, we recommend placing some double-sided tape under the roll or glue.

Our 3/8" Heavy Duty rubber Rolls can be placed over 1/4" thick commercial carpet. Under our rubber flooring, we recommend that the surface underneath be flat and solid. The only surfaces we don't recommend placing rubber flooring over are vinyl and plush carpets.

For our rubber rolls, we recommend using a polyurethane glue to adhere the flooring to any subsurface.

Our 3/8" Heavy Duty Rubber Rolls can be used as flooring in a shower cubicle. You will want to seal the floor to keep and soap, salt, and dirt from getting trapped in the pores of the floor. Rubber when wet is more slip resistant so that this floor would be a perfect in this environment.

For uneven concrete surfaces, we recommend leveling out the concrete to create an even surface. If that is not possible or is not needed, to keep your seams nice and tight, we recommend using our seam sealer.

Our 3/8" Heavy Duty Rubber Rolls are perfect for both home and commercial gyms. 3/8" thick rubber is the most common thickness found in gyms, especially commercial gyms. This thickness is very functional in all types of gym situations and if very easy to clean and maintain.

Our 3/8" Heavy Duty Rubber Rolls would be great as walkway flooring. Rubber flooring is very slip resistant and is, even more, slip resistant when wet, which is perfect for a slope where sweat and other liquids may be present. These rolls are made for use in commercial gyms, so they will help to give you ample shock absorption if someone were to fall and will also protect your subfloor from any fall objects.

Our 3/8" Heavy Duty Rubber Rolls were designed to be used in commercial gyms where heavy weights are dropped on the floor and heavy equipment placed. These rolls are more than durable enough to handle heavy rolling carts.

You can easily maneuver a wheelchair across our 3/8" Heavy Duty Rubber Rolls.

Our 3/8" Heavy Duty Rubber Rolls can be installed in a carport over concrete.

Our 3/8" Heavy Duty Rubber Rolls do no have any black dust that would come off the floor and leave marks in other areas. The black dust you see from lower quality rubber rolls is the roll itself. What happens is that the roll will start to break down and flake making the black dust you see. Our rubber rolls are made from high-quality rubber buffings bound together with the top of the line urethane ensuring that the roll does not break down and flake.

There would be no issues with installing our 3/8" Heavy Duty Rubber Rolls over ceramic tile.

Our 3/8" Heavy Duty Rubber Rolls have and can be used in a hockey locker room where skates will be worn.

Our 3/8" Heavy Duty Rubber Rolls have and can be installed in high traffic walkways where there will be water and heavy abuse from shoes, cleats, ice skates and the like. Rubber is very slip resistant and is more slip resistant when wet. Our rubber rolls are also very easy to clean and maintain and can be mopped, swept, vacuumed, and squeegeed. You will just want to use a mild soap and water solution when cleaning stuck on dirt and grime.

Our 3/8" Heavy Duty Rubber Rolls can be used as elevator flooring. Rubber is very slip resistant and more slip resistant when wet. It is also resistant to mold and mildew growth and very easy to clean and maintain.

The best way to mitigate the smell of the roll is to mop the floor with a mild soap and water solution and to let it air dry. You may have to do this a few times to get the smell to dissipate to a comfortable level. This has been shown to be the best way to get rid of the rubber smell.

Most of our rubber rolls and tiles do not have fall height ratings, which includes our 3/8" Heavy Duty Rubber Rolls. The rubber products that do have fall height ratings are located on our Playground Flooring page.

Our 3/8" Heavy Duty Rubber Rolls can be installed outdoors over a concrete patio or wood deck. These rolls are resistant to mold and mildew growth and are more slip-resistant when wet. The only issue you may run into is that the floor may fade in direct sunlight.

Our 3/8" Heavy Duty Rubber Rolls can be used on stairs. To finish the rolls, you can either butt the two pieces of rubber together to create a joint or you can use stair nosing to protect the rubber from the constant traffic.

Our 3/8 Heavy Duty Rubber Rolls are very eco-friendly as they are made from recycled truck tires. Every year, millions of tires are ground up and repurposed as flooring, underlayment, mulch, and much more. All of our rubber rolls are very safe and virtually latex free. The material used to make our flooring is thoroughly cleaned to ensure that any hazardous materials are not present in your floor. If you would like further testing results for our flooring, please feel free to reach out to one...

Our 3/8" Heavy Duty Rubber Rolls do possess some sound reducing properties. Typically our rubber rolls have STC and IIC around 45.

You can install our 3/8" Heavy Duty Rubber Rolls over compacted crushed gravel as a basketball court. These rubber rolls are slip resistant and are more slip resistant when wet. These rolls are also very resistant to the elements and are easy to clean and maintain.

You do not have to glue our 3/8" Heavy Duty Rubber Rolls. You can loose lay them in most residential uses. If there is some movement, you can always put some double-sided tape under the rolls or our 5900 Series adhesive if necessary. We do recommend leaving a 1/4" gap between the flooring and the baseboard to account for any expansion or contraction that may occur. To help cover up this gapping, we recommend installing a quarter round around the perimeter to give your floor that finished look...

You can install our 3/8" Heavy Duty Rubber Rolls in a snowmobile trailer with carbide runners and studs. These rolls are commonly used in baseball dugouts and ice skating rinks and can withstand the abuse. You don't have to glue or screw our rubber rolls down, but to keep them in place properly, we would recommend using our polyurethane adhesive to keep the rubber rolls in place. You can also screw them down if that is an easier option for you.

If you install our 3/8" Heavy Duty Rubber Rolls in a space that is not temperature controlled, you will want to make sure that you have ample room around the flooring for expansion and contraction. We recommend leaving at least a 3/8" gap between the flooring and wall. This will allow the flooring to expand and contract properly. There are no real parameters for when the flooring will expand and contract, but if there is a large temperature change during the day or night, the flooring will respond...

Our 3/8" Heavy Dury Rubber Rolls are semi-porous but are great as doggy daycare flooring. They are very easy to clean and will not get black on dogs paws or fur. To make these rolls non-porous, we recommend using our Rubber Floor Finish and Sealer and our Seam Sealer to create a homogeneous floor. The sealer will fill in the pores, and the seam sealer will keep any urine or other liquids from seeping to the subfloor below.

Our 3/8" Heavy Duty Rubber Rolls can be used in a commercial kitchen and have. Since flooring in commercial kitchens needs to be non-porous, we recommend using our Rubber Floor Finish and Sealer on the flooring to make it non-porous. At the seams, you will want to use our Seam Sealer Glue. This will ensure that no liquids or oils get under the floor. Rubber flooring is great for kitchens because it is slip resistant even when wet and very easy to clean. Rubber flooring is also mold and mildew...

If you were to roll a heavy cart over our 3/8" Heavey Duty Rubber Rolls, there would be no drag to the cart. A heavy cart would roll better over our rubber flooring than over carpet.

If you are installing our 3/8" Heavy Duty Rubber Rolls over an LVP, LVT, WPC, or SPC, you will not have to worry about the rubber staining your vinyl flooring. The wear layer on the flooring protects the vinyl from interacting with our rubber flooring. If you have a vinyl floor that does not have a wear layer, you will have to worry about the vinyl being stained by the rubber flooring.

You can install our Heavy Duty Rubber Rolls in a driveway. These rolls are very durable and would be able to withstand the constant back and forth of car traffic. The only thing that will affect these rolls is oil from your car. If your car were to leak oil, over time, the binder that holds the rubber together starts to break down.

Our 3/8" Heavy Duty Rubber Rolls are pretty heavy and would stay on the bottom of the pool, but we would recommend gluing the rubber to the bottom of the pool to ensure it doesn't move when walked or played on.

You can install our 3/8" Heavy Duty Rubber Rolls over an epoxy floor.

Our 3/8" Heavy Duty Rubber Rolls can be used behind a bar. Our rubber flooring is very slip-resistant and is more slip-resistant when wet. Behind a bar, we would recommend sealing our flooring with our Rubber Floor Finish and Sealer. This is done to ensure that no food or liquids get caught in the floor. After you seal the floor, you would just simply sweep any large dirt and debris with a broom and then mop the floor with a mild soap and water solution.

Our 3/8" Heavy Duty Rubber Rolls are very durable outdoors. These rolls are made from the treads of commercial truck tires, so they would behave the same way as your car tires do in the elements. Rubber flooring is naturally mold and mildew resistant and is also very slip-resistant even when wet. The only thing you will notice is that in direct sunlight, these rolls will fade over time.

Our 3/8" Heavy Duty Rubber Rolls can be installed over laminate flooring without damaging it. Our rubber flooring can be installed as a floating floor over any solid, flat subfloor or existing floor.

You can seam to 3/8" Heavy Duty Rubber Rolls together with our seam sealer glue. Our rubber flooring is not waterproof, but it is water-resistant. To make these floors more water-resistant, you can apply our Rubber Floor Finish and Sealer, which will fill in the small pores that are found in our rubber flooring. This, in conjunction with the seam sealer, will help to create a floor that is as close to waterproof as they come.

You can install our 3/8" Heavy Duty Rubber Rolls under any type of flooring surface including a Pergo waterproof laminate floor.

Our 3/8" Heavy Duty Rubber Rolls do have a rubber smell to them. If a person is sensitive to the smell, we recommend mopping the floor with a mild soap and water solution. We also recommend that when installing our rubber flooring, that you install it in a well-ventilated space. We do offer virgin rubber products, but currently, you can only get virgin rubber products in tile form. If you are looking to get a virgin rubber tile, we recommend going to our rubber flooring page and click on the...

The typical R-Value for our 3/8" Heavy Duty Rubber Rolls and our rubber flooring, in general, is 1.100. Radiant heating systems are typically installed under porous floors to keep them warm in cold weather. Since our rubber flooring is insulating, you will not get the full effect of the radiant heating system. These rubber rolls will not expand and contract very much when installed over the system. There will be some expansion and contraction, but it will not be significant. To keep the seams...

You can use a Bulldog Scrubber on our 3/8" Heavy Duty Rubber Rolls and any of our other rubber flooring.

Our 3/8" Heavy Duty Rubber Rolls are made with treads of recycled truck tires. Since the recipe to make tires is held pretty tightly by the tire manufacturers, there is potential for there to be a very small amount of latex in our rubber flooring. During the vulcanization process and also in the grinding the revulcanization process, latex does break down quite considerably. However, there is still potential for there to be a minimal amount still present. If you do have a latex allergy, we recommend...

Our 3/8" Heavy Duty Rubber Rolls can be used and have been used as flooring for HIIT workouts and plyo exercises. This rubber roll isn't the best flooring for it, but it can be used. We do have a whole line of flooring that is more geared towards this type of exercise. You can find this flooring on our High Impact Flooring page.

With our rubber flooring products, we recommend at least 5% of overage.

Our 3/8" Heavy Duty Rubber Rolls can be a great flooring option for a stage depending on how the stage will be used. If this is for concerts where a person will essentially be standing, and instruments are being played, our rubber flooring would perform well. Since our rubber flooring is slip-resistant, if there were any spills, the performer(s) would be safe in regards to slip hazards as rubber flooring is more slip-resistant when wet. If the stage is being used for performances where dancing or lots of movement is involved, then our rubber flooring may not be the best solution. We do have a wide range of vinyl dance roll products that would work excellently for this. You can find all of our Marley flooring options on our Dance Flooring page.

Our 3/8" Heavy Duty Rubber Rolls can be used as a bathroom floor. These rubber rolls are very slip resistant and are more slip-resistant when wet. Rubber is naturally mold and mildew resistant and is very easy to clean. To ensure that these rubber floors are super easy to clean and maintain, we do recommend sealing the flooring with our Rubber Floor Finish and Sealer. This will ensure that no solids get in the small pores in the rubber.

Our 3/8" Heavy Duty Rubber Rolls will not damage carpet. If you do have a light-colored carpet, we do recommend placing a plastic sheet between the rubber and carpet, as some staining could occur. When installing our rubber flooring over plush carpet, we do recommend placing a 1/4" plywood board over the carpet. This will help to prevent separation of the rolls due to the carpet pad depressing when walked over.

Technically you can place a carpet pad under our 3/8" Heavy Duty Rubber Rolls, but we don't recommend it. The issue is that when the carpet pad depresses, it can create a tripping hazard between the multiple rolls. To add more cushion to your flooring, we would recommend using one of our rubber underlays. These will provide ample cushion underfoot and are more solid, meaning no tripping hazard.

So overall, both products are essentially the same; The same thickness and same material, but there are differences between the two. So the regrind rolls are all made from all the scrap material that we get from making our standard rubber products like our Heavy Duty Rubber Rolls. The confetti version of our regrind rolls has the same density as our standard rubber flooring and can be used in all the same places. The black version of this product is less dense and is great high impact workouts...

Our 3/8" Heavy Duty Rubber Rolls can be installed over a 4" thick compacted gravel base. All you would need to do is lay the rubber flooring over the base and you would be good to go.

If you would like to seal your rubber flooring, we recommend using our Rubber Floor Finish and Sealer. We don't have any sealers that are in any colors.

Our 3/8" Heavy Duty Rubber Rolls and all of our rubber flooring can get hot if installed in an area that gets a lot of sun. Our rubber flooring will not get as hot as concrete but will get hot. We wouldn't recommend anyone laying directly on the rubber flooring, but you could place mats or chairs on top of the rubber flooring outdoors. Rubber flooring is resistant to the elements and is very slip-resistant, and more so when wet.

You can install our 3/8" Heavy Duty Rubber Rolls over any hard, flat surface and pretty much any existing floor, so you can install our rubber rolls over an existing brick floor.

Our 3/8" Heavy Duty Rubber Rolls can be used as flooring on a ramp outdoors. Our rubber flooring is very slip-resistant, and more so when wet. It is also very easy to clean and maintain and is able to withstand the elements. The only thing you will notice is that the flooring will fade if left in direct sunlight.

To keep your 3/8" Heavy Duty Rubber Rolls looking like new, we recommend using our Rubber Flooring Cleaner and Degreaser. Adding mats to the entrance to where your flooring will also help keep dust and dirt from getting on the rolls as well. For any large dirt and debris, you will want to make sure you sweep or vacuum it up and then mop with our Rubber Flooring Cleaner and Degreaser regularly.

You can drop a barbell with bumper plats on our 3/8" Heavy Duty Rubber Rolls without damaging the subfloor. This thickness is the most common thickness used in commercial gyms.

Our 3/8" Heavy Duty Rubber Rolls won't get that hot if covered and not in direct sunlight. They will actually be cooler than concrete. These rubber rolls are semi-porous and are very easy to clean. To make these rolls non-porous, we recommend using our Rubber Floor Finish and Sealer and our Seam Sealer to create a homogeneous floor. The sealer will fill in the pores, and the seam sealer will keep any urine or other liquids from seeping to the subfloor below. If you don't seal the floor, a dog could urinate on the floor, and the urine would not immediately get in the pores. So if you clean up the urine pretty quickly, you can help to mitigate any issues with urine smells. If urine does get in the floor, we recommend cleaning the floor with our Rubber Floor Cleaner and Degreaser and flushing the floor with a lot of water. This will help to keep the urine smell down.

Our 3/8" Heavy Duty Rubber Rolls can't be heat welded. If you want to seal the seams, we recommend using our Seam Sealer glue. Our Seam Sealer glue is the same type of glue that we used to glue our rubber flooring in place, polyurethane, but in a smaller format and is colored black. Our Premium Seam Sealer glue uses the same glue as our EZ Polyurethane glue. So if you wanted to use the same glue throughout your whole install, we would recommend using our EZ Polyurethane and our Premium Sealer...

You can install our 3/8" Heavy Duty Rubber Rolls over a luxury vinyl floor. The reason that you can install it over a luxury vinyl floor, waterproof, or rigid core floor is due to these products having a wear layer that protects the actual vinyl. If you were to install this over a standard vinyl floor, we would recommend placing a plastic sheet between the vinyl and rubber. This will help to prevent any reaction from happening between the rubber and vinyl.

A citrus-based cleaner will not damage or breakdown our 3/8" Heavy Duty Rubber Rolls or any of our other rubber products.

Yes this would be a suitable application. Be aware that direct sunlight may cause the rolls to fade slightly over time.

Our 3/8" Heavy Duty Rubber Rolls are not the easiest flooring on the knees. If you want something that will be easy on the joints and durable enough for fitness equipment, we would recommend using our Impact Rubber Rolls or our black Regrind Rolls. These floors are less dense than our mainline rubber rolls like the 3/8" Heavy Duty Rubber Rolls.

Our 3/8" Heavy Duty Rubber Rolls can be ordered in any whole foot increment above 15 linear feet. So, yes, you can order custom cut rolls in 24 linear feet.

Our 3/8" Heavy Duty Rubber Rolls do have a top and a bottom and are directional. There is a grain to the rubber, so when rolls are not facing in the same direction, they will look different. Some of our rubber rolls may have writing on the bottom, which will indicate that that is the bottom, but most don't. When you receive your rolls, when you roll them out from their rolled-up position, the rolls will roll out top side up.

Our 3/8" Heavy Duty Rubber Rolls are pretty heavy, so it is pretty tough to move them, but there are certain exercises that could move them. Most Plyometric exercises won't cause the flooring to move. If, for some reason, the rubber rolls did move, we would recommend placing some double-sided tape under the rolls to keep them in place. Our rubber flooring is safe for children and babies to sit or play on. Our rubber flooring is tested constantly to ensure that it is safe for children of all ...