7700 EZ Clean MS Polymer Adhesive
- DIY Friendly
- Eco-Friendly
- Indoor
Financing available — pay over time. Learn more
Free Quick Shipping
Ships between Oct 23 – Oct 26
- Zero VOCs and solvents.
- 4-in-1 adhesive. Can be used as an adhesive, moisture barrier, sound control, and crack suppressant.
- Easy to clean wet or dry. Freeze-Thaw Stable
- DIY Friendly
- Eco-Friendly
- Indoor
Total: $249.99
Best Selling in Adhesives / Glue
You May Also Like
Rubber Gym Flooring Rolls - 4ft Wide (Custom Cut)
Rated 4.5 out of 5 from 40 reviews4.5
Starting From:
$0.99/sqft
$1.52Save 35%
Details & Specifications
Dimensions
- Exact Weight (lbs)
- 48
Features
- Zero VOCs and solvents.
- 4-in-1 adhesive. Can be used as an adhesive, moisture barrier, sound control, and crack suppressant.
- Easy to clean wet or dry. Freeze-Thaw Stable
- CRI Green Label Plus Certified.
- Indoor use only.
Documents
Shipping & Returns
Ships between Oct 23 – Oct 26
Installation
| Floor Type | Trowel | Coverage |
|---|---|---|
| Multi-ply engineered plank 3/8" up to 1/2" and 5/16" to 3/8" solid strip | 3/16" x 3/16" x 5/32" square notch | 50 sqft/gallon spread rate |
| 5/16" solid parquet, 1/4" engineered plank | 1/8" x 1/8" x 1/8" square notch | 80 sqft/gallon spread rate |
| 3/4" solid wood planks/shorts, 4' x 4' plywood | 1/4" x 1/4" x 1/4" square notch | 30 sqft/gallon spread rate |
| Greater than 1/2" engineered plank, 3/4" parquet, and solid plank greater than 3/8" up to 9/16" | 1/4" x 1/4" x 1/8" square notch | 35 sqft/gallon spread rate |
| Bamboo up to 5/8" in thickness | 3/16" x 3/16" x 3/16" square notch | 35 sqft/gallon spread rate |
| Recycled Rubber Flooring over Non-Porous Substrates | 3/32" x 3/32" x 3/32" square notch | 100 sqft/gallon spread rate |
| Floor Type | Trowel | Coverage |
|---|---|---|
| Multi-ply engineered plank and plain-backed parquet | 1/4" x 3/16" V notch | 30 sqft/gallon spread rate |
| Bamboo (Vertical & Horizontal Only) up to 5/8" in thickness | 1/4" x 1/4" V notch | 30-35 sqft/gallon spread rate |
| Solid Wood Planks and Bamboo (Vertical & Horizontal Only) greater than 5/8" in thickness | 1/2" x 15/32" V notch | 20 sqft/gallon spread rate |
Care & Maintenance
Maintenance Instructions:
General Maintenance:
- Regularly check the integrity of the adhesive bond. Ensure there are no signs of moisture seepage or cracking.
- Ensure that the flooring is installed and maintained as per the manufacturer’s guidelines to maintain the effectiveness of the adhesive.
Cleaning Wet Adhesive:
- Use a wet cloth to clean up any adhesive while it is still wet. This will prevent it from hardening and becoming more difficult to remove.
Cleaning Dry Adhesive:
- For dried adhesive, use a tennis ball to roll over the adhesive residue. The adhesive will adhere to the tennis ball and can be easily removed from the floor surface.
Inspection:
- Periodically inspect the flooring for any signs of separation, bubbling, or unevenness that could indicate adhesive failure.
- If any issues are detected, address them promptly to prevent further damage.
Environmental Conditions:
- Maintain the appropriate environmental conditions as specified for the flooring material to ensure the adhesive remains effective.
- Control humidity and temperature levels to avoid compromising the adhesive’s bond.
Storage and Handling:
- Store the adhesive in a cool, dry place when not in use.
- Ensure that the lid is tightly sealed to prevent contamination and drying out of the adhesive.
By following these maintenance details, the EZ Clean MS Polymer Adhesive will provide a long-lasting and effective bond for your wood flooring.
Warranty
Customer Questions & Answers
7 questions
Can the EZ Polyurethane Adhesive (DT 7700) be used with 1' thick Sports Play tiles being laid on an EPDM membrane outdoors on an elevated deck?
Our EZ Polyurethane Adhesive can be used outdoors under our 1" Sports Play Tiles.
Was this helpful?Will this glue work for adhering your 1/8" rubber flooring to asphalt? I have a picnic area that is asphalt and cracking. It has a roof coving it but has open sides.
Our EZ Polyurethane Adhesive is approved to be used over the following substrates: plywood, Terrazzo, ceramic, concrete, and other existing floor types. So for this type of installation, we wouldn't recommend using our EZ Polyurethane Adhesive.
Was this helpful?I’m going to be laying rolls of cork flooring (Corkoleum) that has a rubber backing. The substrate is particle board. Will this adhesive bond rubber to particle board?
Our EZ Polyurethane Adhesive can be used over particleboard.
Was this helpful?I would like to glue down your 1/4” thick 4’ x15’ roll to a raw steel tabletop; what glue do you recommend? I have had some bonding issues in the past. The specs on your urethane glue don’t have steel as an approved base.
Steel is not an approved subfloor or base when using our Polyurethane Glue. The issue is that the glue has a tough time bonding properly to steel. We have had customers use our Polyurethane Glue over steel and aluminum with success. To help the glue bond, the customers had to scrape the metal to create a rough surface, allowing the glue to bond properly.
Was this helpful?
Reviews
Showing 1–2 of 2 written reviews (3 ratings in total)
- 5 out of 5 starsSticky but easy clean up
This is amazing glue. Goes on easy, sticks like a weld, but cleans up easily (if you don't let it set).
Allan ·
7 of 11 found this helpful
- 4 out of 5 starsWorked well for the floor
adhesive works well but was slightly difficult to put down and took awhile.
S ·
6 of 10 found this helpful
Recently Viewed
Loading recently viewed products…