Adjustable T-Square

Reviews

• ★★★★★★★★★★4 out of 5 starsThree deficiencies for this application

  For cutting rubber rolls that are nominally 4 feet wide, this T-square has three deficiencies. First, the rolls are more than 4 feet wide by up to an inch. So, you have to cut the last inch freehand. Second, the 1/4" thickness of the aluminum structure of the T-square limits the depth into a rubber roll to which a box cutter blade can reach. So, you may need to remove the T-square and finish the cut freehand. Third, if the rubber roll is less than 1/4" thick, the cross bar of the T-square will prevent the shaft of the T-square from lying flat on the rubber near the cross bar. This air gap increases the likelihood of the blade wandering in that region. Forewarned, though, the product is very useful.

  Lyn B. · Nov 9, 2024

  12 of 21 found this helpful

• ★★★★★★★★★★5 out of 5 starsWorth adding

  I’ve done a floor with other options to make a straight cut, and did a second room again with this - spend the extra money and get this. It makes the process much easier and much cleaner. Highly recommend.

  Anonymous · Nov 9, 2024

  6 of 7 found this helpful

• ★★★★★★★★★★5 out of 5 starsEssential!

  This made the task of cutting 3/8” tiles precise and professional. Never could have achieved this result without it!

  Mark · Nov 9, 2024

  6 of 10 found this helpful