Rubber Floor Ramps

Our Rubber Flooring Ramps are constructed of homogeneous PVC and provide safe transitions from one surface to another. Our edging comes in two different sizes, .25" and .375", and can be used with our 4-6 mm flooring or our 7-9 mm flooring respectively. These strips can be installed with a polyurethane adhesive and can be cut to fit with a sharp utility knife. Our transition strips are also ADA compliant. Material - Our ramps are constructed of homogenous PVC plastic. Color - Black. Length - Both sizes are 12' long. Width - The 4 mm-6 mm ramp is 2-5/8" wide and the 7 mm-9 mm is 1-5/16" wide. Thickness - The 4 mm-6 mm ramp is 1/4" and the 7 mm-9 mm ramp is 5/16" thick. Weight - 3.99 lb & 4.4 lb respectively.

Installation of moldings is very simple and typically done by the consumer. Typical installation of these moldings is as follows: Measure & trim your molding to fit the space where it will be installed. Secure the track piece to the floor using pressure sensitive adhesive, screws, or nails. Insert molding into track. Tap down lightly with rubber mallet to secure.

Trims and moldings are easy to clean with a damp cloth. For dirtier messes and a deeper cleaning, use a mild soap with a damp sponge to focus on the area.