Description: Our Impact Rolls - Wood Series flooring features a vinyl wear layer bonded to a rubber underlay, creating a floor that combines the look of genuine hardwood with the shock absorbency of rubber. Ideal for indoor basketball courts, these versatile vinyl rolls can also be used in basements, yoga studios, dance studios, and more. With high resistance to fading, wear, and mold/mildew growth, they are perfect for both commercial and residential applications, providing added sound absorption and warmth. Our Impact flooring is backed by a 10-year warranty.
The material is composed of a 2 mm virgin vinyl layer over a 5 mm recycled rubber underlayment. Each roll is 6 feet wide and can be custom cut to your desired lengths free of charge, as long as each roll length is 25 feet or longer and in whole foot increments (25', 26', 27', etc.). The maximum length for these rolls is 45 feet. Additionally, you will typically receive a few extra inches on each roll to facilitate quick and easy installation. The total thickness of these rolls is 7 mm, and they weigh approximately 1.39 pounds per square foot.
Recommended Uses: Looking for a flooring option that can withstand heavy use and provide shock absorbency? Look no further than Impact Rolls - Wood Series! These versatile vinyl rolls are perfect for a wide range of indoor applications, from basketball courts and gymnasiums to dance studios, yoga studios, and basements. Churches and other commercial spaces can also benefit from the durability and easy maintenance of these rolls. Wherever you need a high-performance floor that can stand up to heavy foot traffic and impact, Impact Rolls - Wood Series has got you covered. So why settle for a subpar floor when you can upgrade to the best? Choose Impact Rolls - Wood Series and enjoy a floor that's as tough as it is stylish.
When installing rolled rubber flooring, it is important to secure the rolls in place to prevent them from moving around or sliding apart between adjacent rolls. There are two common methods for adhering rubber rolls to the subfloor: double-sided tape installation and glue installation.
Double-Sided Tape Installation
- Begin by cleaning the subfloor to remove all dust, dirt, and debris.
- Lay out the rolls in the desired configuration and allow them to relax for 24-48 hours to ensure proper installation.
- Note that rolls may be directional, so make sure the colors match on each roll. If the roll colors do not match, flip or turn them 180 degrees to ensure a color match.
- Make any necessary cuts to fit the rolls into the room, leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
- Apply double-sided tape to the perimeter of each roll.
- Place the rubber rolls back into position on top of the double-sided tape.
Glue Installation
- Clean the subfloor to remove all dirt, dust, and debris. Ensure that the subfloor is dry before gluing the flooring down.
- Lay out the rolls in the desired configuration and allow them to relax for 24-48 hours to ensure proper installation.
- Note that rolls may be directional, so make sure the colors match on each roll. If the roll colors do not match, flip or turn them 180 degrees to ensure a color match.
- Make any necessary cuts to fit the rolls into the room, leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
- Roll up one end of the rolls and apply a 10-foot long, light layer of polyurethane adhesive to the subfloor. Unroll 10 feet of the flooring into the adhesive at a time.
- Repeat the previous step for every 10 feet of roll length until the entire roll has been unrolled into its desired position.
- After all rolls have been glued down, use a 100-pound roller on the floor to ensure good adherence to the subfloor. If a roller is not available, walking on the flooring in small, choppy steps may also work.