Rubber Floor Finish and Sealer

Subscribe to back in stock notification

Inexpensive and easy to use general rubber floor sealer.
Low Odor.
Protects floor and creates a wet high gloss sheen.
Ships fast.
Each gallon seals approximately 2000 square feet.

View All

More Information

The rubber floor finish and sealer that we offer is a high quality, ready to use, low odor, zinc-free rubber floor sealer and finish. This sealer does not have to be diluted with water and is designed to add a protective wax layer and wet gloss look to virgin rubber flooring and recycled rubber floor coverings with a high percentage of colorful virgin rubber flecks. The finish can seal approximately 2000 square feet per gallon. Contents - Zinc free styrene acrylic copolymer, non-ionic wax emulsion, diethylene glycol monoethyl-ether, styrene acrylic resin solution, water. Color - liquid appears milky white Directions - Detailed instructions are included on the bottle. Basic instructions are to first clean your floor using RubberFlooring, Inc. Rubber Floor Cleaner and Degreaser or a comparable cleaner. Once the floor is clean, apply a thin coat of rubber floor finish and allow to dry, Size - 1 gallon containers Weight - Approximately 9 lb per gallon.

1-Year Warranty.

Reviews

Questions

Customer Questions And Answer

To apply our Rubber Floor Finish and Sealer to a large area, we recommend using a paint roller with a long handle.

You don't have to use our Rubber Floor Finish and Sealer or Rubber Floor Cleaner and Degreaser if the floor is new. We recommend sealing the floor so it looks brand new longer. But all of our accessories are optional and you can choose to use them at your discretion.

Our Rubber Floor Finish and Sealer will provide either a satin finish to your floor or a matte finish. When used on high colored rubber flooring, the flooring will have a satin, wet-glossy look to it. This appearance could also be described as a semi-gloss look. On black flooring, the sealer will give it a matte, or flat appearance to the floor.

With our rubber floor finish and sealer there is no real recommended amount that needs to be used. Each application will need different amounts. We do recommend you not exceed 4 coats of sealer on your floor. This can cause a hazy appearance to the floor.

Our Rubber Floor Finish and Sealer can be used on black rubber floors. The reason it is not recommended is due to the fact that it will dull the look of the floor. But if that is not and issue, you can use it as directed.

Our Rubber Floor Finish and Sealer covers 2000 sqft. per gallon. You will want to use just a simple soap and water solution after you have applied our Rubber Floor Finish and Sealer. This solution should be applied with a synthetic mop head. Our Rubber Floor Cleaner and Degreaser when applied will strip the Rubber Floor Finish and Sealer from your floor.

Sealing our rubber flooring will help to reduce the smell of our rubber flooring. The best way to dissipate the rubber smell is to mop the floor with a mild soap and water solution and letting the floor air dry.

Our Rubber Floor Finish and Sealer is safe to use around animals. Our sealer is a wax based product. When applied properly, our sealer will provide ample slip resistance when wet or dry.

Our Rubber Floor and Sealer is not UV stable and could yellow in direct sunlight. It can be used outdoors.

You can use Rubber Floor Finish and Sealer on our Eco-Flec rolls to seal the floor. The floor may appear dull depending on the amount of flec in the floor, but this product will help to fill in the pores in your floor.

We recommend that you use a damp mop with a mild soap and water solution to help reduce a strong rubber smell. Recommended soaps are Dawn dish detergent or Tide laundry detergent.

When you seal our rubber flooring, under normal use, you will want to reapply it every six months. Under heavy use, you may have to reapply it every month. This product is best used on high colored floors as it will dull out the look of an all black floor.

Our Rubber Floor Finish and Sealer can be used on our Flagstone Rubber Pavers. This product is great to use on any rubber. We don't recommend using it on totally black floors as it will give a dull appearance to the floor, but if you don't care how it looks, it is a great choice for sealing your floor.

You can use our Rubber Floor Finish and Sealer on gray rubber floors. This will help to keep the gray color looking gray longer.

Our Rubber Floor Finish and Sealer does not scuff easily. If you apply multiple layers, you will get a very durable product. Over time, this will wear down and will need to be reapplied. We recommend reapplying this every 3-6 months depending on use.

Our Rubber Floor Finish and Sealer can be used on a rubber playground surface. Since playgrounds get a lot of traffic, you will have to reapply this quite often.

Our Rubber Floor Cleaner and Degreaser will strip the Rubber Floor Finish and Sealer from the floor.

To apply our Rubber Floor Finish and Sealer, you will want to follow these steps. 1. Thoroughly clean all residue from the rubber rolls or tiles using our Rubber Floor Cleaner and Degreaser. 2. Rinse Thoroughly and allow to dry. 3. Fully saturate a clean, good quality sponge mop with non-diluted Rubber Floor Finish and Sealer. 4. Apply a thin coat of finish and allow it to fully dry (avoid aggressive fan forced drying that may cause the finish not to dry completely). 5. Repeat to a maximum of four coats, or until the desired level of sheen is achieved. 6. It is critical that the floor finish is applied in thin coats and is allowed to dry between coats or hazing fully may occur. It is not recommended that finish is machined buffed or finish marking may occur. 7. After the surface has been dry for 24 hours, general maintenance such as damp mopping may be done as required.

Our Rubber Floor Finish and Sealer does make it easier clean our rubber flooring. Since this fills in the pores and indentions that can be found in our rubber flooring, no dirt or debris will get stuck on or in your floor.

You use our Rubber Floor Finish and Sealer over a logo on rubber surface to protect it. You would follow the same instructions as you would installing this over our rubber flooring.

Our Rubber Floor Finish and Sealer is a wax based sealer and will make the floor less slip resistant than if you had left the rubber surface exposed. This waxed based sealer on its own will not make the floor slippery.

If you apply our Rubber Floor Finish and Sealer to your floor, you can not buff it. If you use a buffer, you will actually strip the sealer off the floor. This sealer is a wax based sealer and will only offer a semi-gloss appearance to the floor.

Our Rubber Floor Finish and Sealer is best used on floors with 75% + color flec but can be used on any color floor. When used on black floors, the sealer will make it appear dull. If there is any level of color flec in the floor, it will help to keep the color popping for as long as the sealer is on the floor.

Our Rubber Floor Finish and Sealer will help to mitigate the smell of our rubber flooring and will help to seal the floor, so no liquids get in or under the flooring. If there are seams in your flooring, we recommend using our Seam Sealer glue to create a watertight floor. When cleaning these rolls after the sealer has been applied, we recommend using only a mild soap and water solution. Since our sealer does not last forever, you will want to use our Rubber Floor Cleaner and Degreaser to remove...

Rubber flooring is water-resistant, not necessarily waterproof. Our Rubber Floor Finish and Sealer will help to fill in any pores in your flooring to help make it more water-resistant. If you have multiple rolls or tiles where there are seams, we recommend using our seam sealer glue as well to help make your flooring more water-resistant.

You can use our Rubber Floor Finish and Sealer on a black rubber mat to keep black rubber from getting on everything. Since this would be used in a commercial environment, we recommend resealing the mat about every three months. To reapply the finish, you will need to remove the remaining old finish with our Rubber Floor Cleaner and Degreaser and then reapply the Finish and Sealer. Our sealer will make it easier to keep your mat clean and will also make it easy to disinfect the floor if need...

Our Rubber Floor Finish and Sealer will help to reduce the sight of footprints even on all black flooring. Just follow the instructions on the bottle to properly seal your floor for an easy to clean and maintain gym floor.

Our Rubber Floor Finish and Sealer can't be used as a topcoat over epoxy.

We recommend not using your floor for 24 hours after our Rubber Floor Finish and Sealer has been applied for best results.

When using our Rubber Floor Finish and Sealer for products that we don't sell, we recommend following any care instructions from the manufacturer of your flooring product to make sure that our finish and sealer will work and not damage your flooring.

To remove our Rubber Floor Finish and Sealer from a rubber floor, we recommend using our Rubber Floor Cleaner and Degreaser. This will strip the sealer off the floor cleanly.

If you use our Rubber Floor Finish and Sealer on that floor, you will stop the transfer of rubber or color from the tile to other surfaces. This sealer is not a permanent sealer, so you will need to reapply it every so often.

Our Rubber Floor Finish and Sealer will help to prevent the black rubber from staining your socks and your wood flooring. Since the flooring is lightly trafficked, you will most likely have to replace the sealer 1-2 times a year.