Description: Our thickest and most durable Impact roll, the 15mm Impact Rolls - Designer Series, is ideal for both commercial and residential spaces. These rolls feature a 1/2" rubber underlay, providing a slip-resistant surface that is durable, shock-absorbent, and sound-absorbent. Easy to install and maintain, the rolls resist mold and mildew growth, and are backed by an industry-leading 5-year warranty. These rolls add warmth to any room, making them perfect for upstairs gyms, playrooms, and more.
The rolls are made of recycled rubber and colored EPDM virgin rubber flecks, each roll is 4' wide and custom cut to your desired lengths free of charge, provided each roll is at least 25' long and in whole increments (25', 26', 27', etc.). You will typically receive a few extra inches on each roll for easy installation. The rolls are 15 mm thick and weigh 2.36 lb/sq-ft.
Recommended Uses: Our 15mm Impact Rolls – Designer Series are versatile enough to be used for both commercial and residential spaces. These durable rubber rolls are a great flooring option for a variety of purposes, including CrossFit and home gyms, high-impact workouts, indoor track surfacing, basement flooring, upstairs playrooms, garage gym flooring, trade show flooring, and more.
Quick Note: Our 15 mm Impact Rolls - Designer Series are made in batches, which can lead to color variations when placing multiple orders. To maintain a consistent look, we recommend ordering extra flooring to account for mistakes, replacements, and future expansion.
It is recommended to use an adhesive when installing rolled rubber flooring to prevent the rolls from moving around or sliding apart between adjacent rolls. The two most common methods for adhering rubber rolls to the subfloor are:
A: Double-Sided Tape Installation
- Clean the subfloor to remove all dust, dirt, and debris.
- Loose lay the rolls in the room as desired and let them relax for 24-48 hours.
- Note: Make sure roll colors match and adjust accordingly.
- Make any necessary cuts to the rolls to fit them into the room and leave a gap for expansion and contraction.
- Roll up the rolls at one end of the room and apply double-sided tape to the floor along the perimeter of each roll.
- Place the rubber rolls back into position on top of the double-sided tape.
B: Glue Installation
- Clean the subfloor to remove all dirt, dust, and debris, and make sure it is free of any moisture.
- Loose lay the rolls in the room as desired and let them relax for 24-48 hours.
- Note: Make sure roll colors match and adjust accordingly.
- Make any necessary cuts to the rolls to fit them into the room and leave a gap for expansion and contraction.
- Roll up the rolls at one end of the room and spread a light layer of polyurethane adhesive that is 10 feet long maximum.
- Unroll the flooring into the adhesive 10 feet at a time.
- Repeat the previous step until the entire roll is in place.
- Use a 100-pound roller on the floor to guarantee good adherence to the subfloor, or walk on the flooring in small choppy steps.
Designer Series Impact rolls are easy to clean and maintain. To keep the flooring surface free of dust and debris, vacuum as needed. For deeper cleaning, damp mop with a mild soap and water mixture using soaps such as Dawn or Tide.
Note: Do not use solvent or oil-based cleaners such as Pinesol, Lysol, Murphy's Oil Soap, WD40, or paint thinner as they can damage the flooring over time.
