5mm Pre-Cut Rubber Rolls

5mm = 3/16" thick.
Backed by a 5-year warranty.
Great for walkways, playrooms, and basements.
We recommended a glue-down install.
Starting at only
$92.99 /SQ FT
MSRP $123.99/SQ FT

5mm Pre-Cut Rubber Rolls

loader
Loading...
  • 5mm = 3/16" thick.
  • Backed by a 5-year warranty.
  • Great for walkways, playrooms, and basements.
  • We recommended a glue-down install.
View All

More Information

Get our 5 mm rubber rolls now in easy-to-order pre-cut sizes. These economical rubber rolls are great for light-traffic areas where anti-slip flooring is needed. High quality, these rubber rolls look just like the commercial-grade flooring you will find at your local gym, but they are specially designed to meet any homeowner's needs.




Recommended Uses: Our 5mm Rubber Rolls have been a trusted solution for anti-slip flooring needs for many years and have been successfully used in various applications. They are trendy in light-duty home gyms and personal training studios, providing a durable, slip-resistant surface for your workout routines. They are also great for basements, school locker rooms, and art studios, where moisture and spills can make floors hazardous. However, the versatility of our rubber rolls extends far beyond these typical applications - they have been used in countless other areas, from playrooms and garages to dog kennels and workspaces. So no matter where you need a reliable and long-lasting anti-slip flooring solution, our 5mm Rubber Rolls are the perfect choice!




When installing rolled rubber flooring, it is recommended that you use an adhesive to prevent the rolls from moving around or sliding apart between adjacent rolls. The most common methods of adhering rubber rolls to the subfloor are:

A: Double-Sided Tape Installation
  • First, clean your subfloor so that it is free of all dust, dirt, and debris.
  • Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for 24-48 hours to ensure the proper installation of your new flooring.
  • Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches.
  • Make any necessary cuts to the rolls to fit them into the room using a straight edge and a utility knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
  • Roll up the rolls at one end of the room. Apply double-sided tape to the floor along the perimeter of each roll.
  • Place the rubber rolls back into position on top of the double-sided tape.

B: Glue Installation
  • First, clean your subfloor so that it is free of all dirt, dust, and debris. Also, when gluing your flooring down, it is recommended that the subfloor is free of any moisture.
  • Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for 24-48 hours to ensure the proper installation of your new flooring.
  • Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches.
  • Make any necessary cuts to the rolls to fit them into the room using a straight edge and a utility knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
  • Roll up the rolls at one end of the room. Spread a light layer of polyurethane adhesive that is 10’ long (maximum) and unroll the flooring into the adhesive 10’ at a time.
  • Repeat this step for every 10’ of roll length until the entire roll has been unrolled into its desired position.
  • After all of the rolls have been glued down, it is often recommended to use a 100-pound roller on the floor to guarantee good adherence to the subfloor. If a roller is not available, walking on the flooring in small choppy steps may also work.

Our 5mm Rubber Rolls are not only durable and slip-resistant, but they are also easy to clean and maintain. Follow these simple steps to keep your rubber flooring looking great:

  • Vacuum any loose debris, dust, or crumbs from the surface of the rubber rolls as needed. For best results, use a vacuum with a soft-bristled brush attachment to avoid damaging the surface of the rubber.
  • Occasionally damp mop the rubber rolls with a mild soap and water solution. We recommend using a small amount of Dawn dish detergent or Tide laundry detergent in warm water. Do not use excessive amounts of water, as this can seep into the seams and cause the rubber to lift or curl at the edges.


Note: Avoid using any solvent or oil-based cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. These types of cleaners can break down the rubber flooring over time and cause damage.

Reviews

Questions

Customer Questions And Answer
No Questions
loader
Loading...