Complete Your Order
Contact Us
 
8am - 8pm EST Monday - Friday
10am - 7pm EST Saturday

Jamboree Playground Tiles™

Starting At
$5.59/sqft
$7.45 25% off
  • 2.5" thick tiles ship in 1-2 bus. days.
  • Fall Height Certified.
  • Water Permeable for proper drainage.
In Stock - Ships between Jan 29 - Mar 3
Select a Color
BlackJamboree Playground Tiles™
Black Jamboree Playground Tiles™ Black
Accessories
Quad Blok Connector
Quad Blok Connector
1 Blok per tile
$2.89 ea.
$2.89 ea.
1" Reducer
1" Reducer
4" x 48"
$39.99 ea.
$39.99 ea.
Playground Swing Mats
Playground Swing Mats
32" x 54" x 2-1/4" thick
32" x 54" x 2-1/4" thick mat
$89.98 ea.
$89.98 ea.
3-Position Swing Station
3-Position Swing Station
10' x 8.5' x 7.5'
$699.00 ea.
$699.00 ea.
  • 2.5" thick tiles ship in 1-2 bus. days.
  • Fall Height Certified.
  • Water Permeable for proper drainage.
  • Excellent traction wet or dry.
  • Manufactured in USA.
  • 15yr limited warranty!
Description - These recycled rubber playground tiles are made in the US and are designed to keep kids safe when playing on jungle gyms, swing sets, and other playground equipment or athletic areas. These playground surfaces are available in solid black, red, grey and green offering an eye-catching look with superior shock absorption, long-term durability, and easy maintenance. This rubber playground surface exhibits excellent resistance to weathering and aging and helps to ensure the safety of children from different fall heights. They also provide a clean and safe alternative to wood and playground rubber mulch. This playground surface can be used indoors as well as outdoors and, when installed correctly, provide proper drainage.
Material – Our pigmented playground rubber tiles are composed of high-quality recycled SBR bound with a wear and weather resistant pigmented polyurethane.
Note – Some minor color variation among traditional pigmented tiles is unavoidable. Pigmented tiles will fade in direct sunlight overtime and can potentially bleed. The warranty on these tiles will not cover color fading and bleeding.
Size – Each tile is 24" x 24." See below for dimensions of accessory options.
Thickness – 2.5” (4 foot fall rating)
Weight – 24 pounds
Recommended Uses – These tiles have been used successfully in school and park playgrounds, in community playgrounds, in skateboard parks, climbing walls, community play areas for children, as decks and patios, on rooftops, in day care centers, as indoor and outdoor walk ways and paths, and any other place where a fall absorbing playground or general rubber surface would be beneficial.
Accessory Dimensions:
  • Quad Block is 8" x 8"
  • 2.5" reducer is 48" x 8"
  • 2.5" ADA ramp is 24" x 24"
  • 2.5" L/R side reducer for ADA ramp is 24" x 8"
  • 2.5" outside 45 deg. corner reducer is 16" x 8"
  • 2.5" inside 45 deg. corner reducer is 12" x 8"
  • 2.5" outside 90 deg. corner reducer is 16" x 8"
  • 2.5" inside 90 deg. corner reducer is 24" x 24"

In Stock - Ships between Jan 29 - Mar 3

To clean and maintain our pigmented playground tiles, a routine cleaning with a power washer (not to exceed 2000psi) or scrubbing machine and mild detergent (non-petroleum base) will maintain an attractive and long-lasting appearance.

Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. as these types of cleaners will break down the outdoor playground rubber surface over time.

  • When installing 2.5" thick Jamboree playground tiles, one quad block connector is recommended for every one Jamboree tile purchased.
  • For more detailed Jamboree rubber playground tile instructions, please Click Here.
  • Don't see what you're looking for? 
    I'm planning on buying the 2.5 inch Jamboree tile for about 1000sq area. Can I install it over compacted dirt?
    Amaury
    Our Jamboree Playground Tiles can be installed over compacted dirt or gravel with the use of quad blocks. These installation accessories are recommended for this thickness of tile.
    How do you recommend to install reducers and corners for 2-1/2" tiles? How to fix it in place? There is no way to use Blok connectors, so I am stuck with it.
    Luba
    To adhere the ramps and corners you will want to use our polyurethane glue or seam sealer. Just apply the glue to the side that butts up to the tile, press and hold and the ramp and corners will bind to the floor.
    We would like to install this on the bathroom/shower floors in our cabin. It can be very damp because it's a small area. Would the 2.5 in tiles allow for proper drainage and can these be cut to size?
    Ames Baptist Church
    Our Jamboree Playground Tiles are porous and allow water to flow through the tiles. So they will drain properly in your shower. We also do offer a wide range of shower tiles that you may be interested in on our drainage tiles page. Our Jamboree tiles can be cut to fit with the use of a large bread knife or band saw.
    We are looking for something to place under a pool for our toddler. Unfortunately, our backyard has more concrete than grass and with 4 dogs, we do not want her on the grass in the backyard for obvious reasons and don't like the lack of privacy in the front yard. We let her splash around in a blowup pool, but she likes to get out now and then - so we need something under and around the pool so if she falls, she will not get hurt.
    Lori D.
    Our Jamboree Playground Tiles work perfectly for this application. Our Jamboree Tiles have a fall height rating, so if your little one were to fall, they would not be seriously hurt. Another great fact about our playground tiles is that they are made from rubber. Rubber is more slip resistant than concrete, and when wet, rubber becomes more slip-resistant making it the perfect flooring option around water. If the flooring were in direct sunlight, we would recommend going with a color other than black.
    Is this easy to take up? We would probably want to take up yearly to clean and disinfect sufficient underneath since this would be inside a bathroom.
    Ames Baptist Church
    Our Jamboree Playground Tiles can be easily removed and replaced.

    results 1-5 of 33

    Average Rating
    4.8/5.0

      Nice product
    Self-installed in exterior playground
    Chris from Glen Burnie MD wrote...
    We created a toddler playground on an existing asphalt parking lot. This was the perfect covering for the asphalt, easy to install and overall a nice finished product. We ordered way to many connectors ( one per tile we were told) but along the edges you have to cut them in half because the way they are stamped each tile only fits the corner.
    Customer review image of  in Play area
    Larger Image
      Perfect Solution
    Self-installed in Play area
    Jeremy Daniel from TX wrote...
    We are using this for an indoor play area for our autism therapy clinic. The flooring is very sturdy, the ability to secure it to the subfloor surface is terrific, and the clients we serve enjoy it very much.
    Customer review image of  in Playground
    Customer review image of  in Playground
    Customer review image of  in Playground
    Larger Image
      Has Worked Out Great!
    Self-installed in Playground
    Dan from Hemet, CA wrote...
    It has worked out great and the kids love it. Your flooring is a great product and easy to install.
    green checkmark Your item was added to the cart

    Color:
    Qty:

    $0.00
    $0.00