Description - These recycled rubber playground tiles are made in the US and are designed to keep kids safe when playing on jungle gyms, swing sets, and other playground equipment or athletic areas. These premium playground tiles have a top layer that is 20% denser than other tiles or poured surfaces. This provides unrivaled durability in vibrant color options and keeps your playground surface beautiful for years to come. Jamboree Playground Tiles exhibit excellent resistance to weathering and aging, and have two different thicknesses, 1" and 2.5”, to help ensure the safety of children from different fall heights. They also provide a clean and safe alternative to wood and playground rubber mulch and proper drainage so they can be used inside or outside.e.
Material – Our premium playground rubber tiles are composed of a high-quality recycled SBR rubber base, colored EPDM rubber granules, and weather-resistant polyurethane. The colorful surface layer is made from EPMD virgin rubber that will not bleed but can fade slightly in direct sunlight over time.
||1" & 2.5"
||1" tiles: 16 Lbs., 2.5" tiles: 26 Lbs.
|Made in the USA
|Fall height certified
|Fall height rating
||1" tiles: 1.5’ & 2.5" tiles: 4 to 5’
|Perforated for drainage
Recommended Uses – These tiles have been used successfully in school and park playgrounds, community playgrounds, daycare centers, skateboard parks, under rock climbing walls, as deck and patio flooring, indoor and outdoor walkways, and paths, on rooftops, and other areas where a fall absorbing rubber surface would be beneficial.
- Quad Block is 8" x 8"
- 2.5" reducer is 48" x 8"
- 2.5" ADA ramp is 24" x 24"
- 2.5" L/R side reducer for ADA ramp is 24" x 8"
- 2.5" outside 45 deg. corner reducer is 16" x 8"
- 2.5" inside 45 deg. corner reducer is 12" x 8"
- 2.5" outside 90 deg. corner reducer is 16" x 8"
- 2.5" inside 90 deg. corner reducer is 24" x 24"
- 4.25" reducers are 48" x 12"
Accessory Note – Accessory pieces for designer series jamboree playground tiles include a 20% color fleck blend.
Available For Order - Ships between Dec 29 - Jan 19
To clean and maintain our pigmented playground tiles, routine cleaning with a power washer (not to exceed 2000psi) or scrubbing machine and mild detergent (non-petroleum based) will maintain an attractive and long-lasting appearance.
Note: Do not use any solvent or oil style cleaners such as Pine-Sol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the outdoor playground rubber surface over time.