Complete Your Order
Contact Us
8am - 8pm EST Monday - Friday
10am - 7pm EST Saturday

Daltile Continental Slate

Price from
$3.34 sqft
$50.10 case, covers 11 sqft
reg: $4.45 sqft
case: $66.80
Random variation

Proudly made in the USA
Ships between Oct 23 - 25
Selected Color: 
roll over image to magnify
Egyptian BeigeDaltile Continental Slate
Egyptian Beige Daltile Continental Slate Egyptian Beige
Indian RedDaltile Continental Slate
Indian Red Daltile Continental Slate Indian Red
Brazilian GreenDaltile Continental Slate
Brazilian Green Daltile Continental Slate Brazilian Green
Asian BlackDaltile Continental Slate
Asian Black Daltile Continental Slate Asian Black
Persian GoldDaltile Continental Slate
Persian Gold Daltile Continental Slate Persian Gold
Moroccan BrownDaltile Continental Slate
Moroccan Brown Daltile Continental Slate Moroccan Brown
Tuscan BlueDaltile Continental Slate
Tuscan Blue Daltile Continental Slate Tuscan Blue
English GreyDaltile Continental Slate
English Grey Daltile Continental Slate English Grey

44 tiles per case
Accessories for Daltile Continental Slate
3" x 12"
Transitions tile flooring from the floor to the wall
$7.71 $10.28
Weight: 1.00lbs
Cove Base
Cove Base
6" x 12"
Transitions tile flooring from the floor to the wall
$16.87 $22.49
Weight: 1.00lbs
Cove Base Outcorner
Cove Base Outcorner
1" x 6"
Fills the corner where cove base come together
$16.87 $22.49
Weight: 1.00lbs
Daltile Continental Slate Mosaic
Daltile Continental Slate Mosaic
3" x 3" Mosaic
Ceramic 12" x 24" Sheet
$16.49 $21.99
Weight: 2.76lbs
Accessories banner
  • Details
  • Shipping and Returns
  • Maintenance
  • Installation Info
  • Warranty Info
  • Specs
Description - The Continental Slate collection offers a low cost yet realistic-looking slate tile that is incredibly easy to clean and maintain. Unlike natural stone flooring, these tiles never have to be resealed and are constructed with increased durability. Constructed using color porcelain, this means that if any damage is to occur to the top of the tile, you will not have bright white showing through as with other tiles. Rather, the color of the tile is to match the top porcelain surface closely, so damage is not as noticeable. Offered in multiple sizes and colors, you can mix and match to create a unique pattern.
Material – Body Match porcelain tile.
Size – Available as 6" x 6", 12" x 12", and 18" x 18" tiles.
Thickness – 5/16"
Shade Variation – Random (V4)
Minimum Grout Joint Recommendation – 1/8” (Floor - 3/16” when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%
Application – Floors, walls, countertops, pool linings.
Breaking Strength – >275 lbs.
Case Weight – Each 6x6 case weighs ~43 lbs, each 12x12 case weighs ~57 lbs, and each 18x18 case weighs ~67 lbs.
Origin – Made in the USA.
Recommended Uses – Daltile's Continental Slate floor tiles are recommended for a variety of applications, including residential homes, bathrooms, kitchen flooring, bedroom floors, and more high traffic areas that need a touch of nature.
Models: – CS54, CS50, CS51, CS56, CS55, CS57, CS53.

In Stock - Ships between Oct 23 - 25

Porcelain tiles are easy to keep clean and maintain. Maintenance of the floor typically includes:
  • Daily or weekly vacuuming or mopping of dirt, grit, dust etc.
  • Place door mats at all entrances to prevent tracked in dirt, rocks, moisture, and other debris.
  • Glazed tiles should be cleaned routinely with an all-purpose, low VOC household or commercial cleaner.
  • The entire area should be cleaned and scrubbed with cleaner solution by using a cotton mop, cloth, sponge, or non-metallic brush.
  • Routine cleaners should never contain hazardous or polluting products including, but not limited to acids or ammonia. Acids can damage the grout and the glazed surface of the tile, while ammonia can cause discoloration of grout.
  • When complete, be sure to rinse the entire area with clean water to remove all cleaning solution residue.
  • For detailed cleaning instructions, please Click Here.
General instructions for installing floor tile:
  • Tile must be installed over structurally sound substrates. Any damaged, loose or uneven areas must be repaired, patched and leveled.
  • Start by marking the center point of the room. Place a row of loose tiles along the center lines in both directions, leaving enough space for uniform joints (use tile spacers).
  • Using the notched side of the recommended trowel, comb adhesive into standing ridges by holding trowel at a 45-degree angle. Remove excess adhesive, leaving a uniform, ridged setting bed. Never spread a larger area than can be set in 15 minutes.
  • Measure tiles to be cut carefully and mark with a pencil or felt-tip pen. Make straight or diagonal cuts with a tile cutter and curved cuts with a nipper. Be sure to mix tiles from several cartons as you set, for a blended effect.
  • Begin installation in the center of the room. Finish each grid before moving to the next. Start with the first tile in the corner of the grid and work outward. Set tiles one at a time using a slight twisting motion. Insert tile spacers as each tile is set. Fit perimeter tiles in each grid last, leaving 1/4" gap between tile and wall.
  • When grid is completely installed, tap in all tiles with a rubber mallet or hammer and wood block, to ensure a good bond and level plane. Remove excess adhesive from joints with a putty knife, and from tile with a damp sponge.
  • Do not walk on tiles until they are set (usually in 24 hours).

Tips for installing large format floor tile:

  • Large size floor tile installation requires particular attention to proper subfloor preparation, grout joint sizing, trowel selection, and mortar coverage.
  • It is absolutely critical that large tile be installed on a level substrate.
  • Installation Requirement: For proper bonding, medium bed mortar should be used in installing tiles with a dimensional length greater than 15 inches on any one side of the tile. Back buttering tiles of this nature in the installation process will also assure proper coverage for body.
For detailed installation instructions, please Click Here.
For printable warranty information, please Click Here.


  • Body Match porcelain.
  • Natural slate look.
  • Great for high traffic spaces.
  • Random color variation from tile to tile.
  • Made in the USA.
  • Post consumer recycled materials.
  • Exterior product.


Customer Questions & Answers

Don't see what you're looking for? 
Your item was successfully added to cart
Large Product Image


$0.00 $0.00