Description - The newest offering by USFloors, COREtec Plus Design, offers a truly unique new addition to the WPC market that nobody else has. These tiles come in multiple width options, as well as with multiple tone options, and are easy on the eyes. Complete with 4 sided beveled edging, the luxurious look and feel of your new floor is sure to make your friends jealous.
Material – USFloors vinyl flooring is constructed with virgin vinyl, and contains no hazardous metals or chemicals. The extruded WPC core, called Hydracore, is composed of recycled wood, bamboo dust, limestone and virgin PVC.
Size – Available in 12.05" x 35.63" and 18" x 23.62". Multi width tile boxes come with the following size: 5.83" x 23.62", 12.05" x 23.62".
Thickness – ~8mm (5/16")
Wear Layer – 20 MIL (0.508 mm)
Recommended Uses – Design by COREtec tiles are recommended in plenty of high traffic areas, including in the home, as well as commercial spaces. Office buildings, boutiques, bedrooms and basements are just a few places this fashionable tile has been installed.
Out of Stock - Pre-Order Now
Engineered vinyl tiles and planks are easy to keep clean and maintain. Maintenance of the floor typically includes:
- Daily or weekly vacuuming or dust mopping of dirt, grit, dust etc.
- Use felt pads under chair and furniture legs to prevent scratching of the flooring surface.
- Place door mats at all entrances to prevent tracked in dirt, rocks, moisture, and other debris.
- Avoid using rubber backed mats as they can stain the flooring surface over time.
- When mopping, use a damp and never a wet mop.
- Clean up spills immediately to prevent damage to the floor.
For more detailed cleaning instructions along with commercial cleaning instructions, please
Click Here.
Installation is simple, and is commonly done by our customers. Installation of USFloors planks and tiles is as follows:
- Complete any necessary floor prep.
- Start with the tongue side facing the wall.
- After the initial starter board, press the end seam of the second plank into the end seam of the first plank, and then lock them together by laying the plank down. Continue working left to right.
- Install the first plank in the second row by inserting the tongue into the groove of the plank in the first row. This is best done with a low angle of the plank.
- Insert the long side seam at a slight angle first. As the top surfaces meet, rotate the plank down into the locked position. Engage the end seam, using a rubber mallet if necessary.
- Planks may be cut with a utility knife using the “score and snap” technique, or with the use of a crosscut power saw.
- Continue installing planks removing any gaps using a tapping block and a scrap of flooring to cover the tapping block. Be careful not to damage In*Step tongue and groove.
- Protect all exposed edges by installing wall moulding and/or transition strips. Make sure that no plank will be secured in any way to the subfloor.
For more detailed installation instructions, please
Click Here.
9,707+ Verified Reviews
Over 200 Million Sqft
30 Day Money Back
Price Match
Free Samples
