Complete Your Order
Contact Us
8am - 8pm EST Monday - Friday
10am - 7pm EST Saturday

Daltile Archaia

Starting At
$2.59 /sqft
Your Savings
Save 25%
Available For Order - Ships between Dec 10 - 17
Select a Color
Relic WhiteDaltile Archaia
Relic White Daltile Archaia Relic White
Artifact BeigeDaltile Archaia
Artifact Beige Daltile Archaia Artifact Beige
Province GrayDaltile Archaia
Province Gray Daltile Archaia Province Gray
Atlas GrayDaltile Archaia
Atlas Gray Daltile Archaia Atlas Gray
Product Highlights
  • Inspired by the visual of Alabastrino stone
  • Provides a neutral, contemporary setting for any design
  • Made in the USA
Daltile Archaia - Sample
Daltile Archaia - Sample
Sample Piece Only
LIMIT: 1 Sample Per Color
$9.99 ea.
$9.99 ea.
Daltile Archaia Mosaic
Daltile Archaia Mosaic
2" x 4" (14" x 12" sheet)
2" x 4" (14" x 12" sheet) 0.67 sq ft
$13.19 ea.
$13.19 ea.
  • Inspired by the visual of Alabastrino stone
  • Provides a neutral, contemporary setting for any design
  • Made in the USA
  • Random (V4) shade variation
  • Slip, scratch, and fire resistant
  • Water, stain, and dent proof
Description - Daltile Archaia collection is constructed from durable porcelain tile with the attractive and luxurious visual or traditional travertine. Made in the USA, Archaia is suitable for floors, walls and countertops, allowing for a versatile installation in any room of the home. With the addition of Reveal Imaging Technology, these tiles replicate an authentically detailed travertine look but comes in the low maintenance of a porcelain tile.
Material Porcelain
Tile Size 13" x 13", 12" x 24", 20" x 20"
Visual Stone
Installation Location Floors, Walls, Countertops
Scratch Hardness (MOHS) 8.0
Chemical Resistant Yes
Shade Range Random V4
Slip Resistant No
Shape of Tile Rectangle / Square
Made in USA Yes
Grout Options
Good: Polyblend Sanded Grout
Better: Prism SureColor Grout
Best: Fusion Pro Grout
Product Codes – AR402020A1PF, AR412020A1PF, AR422020A1PF, AR432020A1PF, AR401224A1PF, AR411224A1PF, AR421224A1PF, AR431224A1PF, AR4013131PF, AR4113131PF, AR4213131PF, AR4313131PF

Available For Order - Ships between Dec 10 - 17

Porcelain tiles are easy to keep clean and maintain. Maintenance of the floor typically includes:
  • Daily or weekly vacuuming or mopping of dirt, grit, dust etc.
  • Place door mats at all entrances to prevent tracked in dirt, rocks, moisture, and other debris.
  • Glazed tiles should be cleaned routinely with an all-purpose, low VOC household or commercial cleaner.
  • The entire area should be cleaned and scrubbed with cleaner solution by using a cotton mop, cloth, sponge, or non-metallic brush.
  • Routine cleaners should never contain hazardous or polluting products including, but not limited to acids or ammonia. Acids can damage the grout and the glazed surface of the tile, while ammonia can cause discoloration of grout.
  • When complete, be sure to rinse the entire area with clean water to remove all cleaning solution residue.
  • For detailed cleaning instructions, please Click Here.
General instructions for installing floor tile:
  • Tile must be installed over structurally sound substrates. Any damaged, loose or uneven areas must be repaired, patched and leveled.
  • Start by marking the center point of the room. Place a row of loose tiles along the center lines in both directions, leaving enough space for uniform joints (use tile spacers).
  • Using the notched side of the recommended trowel, comb adhesive into standing ridges by holding trowel at a 45-degree angle. Remove excess adhesive, leaving a uniform, ridged setting bed. Never spread a larger area than can be set in 15 minutes.
  • Measure tiles to be cut carefully and mark with a pencil or felt-tip pen. Make straight or diagonal cuts with a tile cutter and curved cuts with a nipper. Be sure to mix tiles from several cartons as you set, for a blended effect.
  • Begin installation in the center of the room. Finish each grid before moving to the next. Start with the first tile in the corner of the grid and work outward. Set tiles one at a time using a slight twisting motion. Insert tile spacers as each tile is set. Fit perimeter tiles in each grid last, leaving 1/4" gap between tile and wall.
  • When grid is completely installed, tap in all tiles with a rubber mallet or hammer and wood block, to ensure a good bond and level plane. Remove excess adhesive from joints with a putty knife, and from tile with a damp sponge.
  • Do not walk on tiles until they are set (usually in 24 hours).

Tips for installing large format floor tile:

  • Large size floor tile installation requires particular attention to proper subfloor preparation, grout joint sizing, trowel selection, and mortar coverage.
  • It is absolutely critical that large tile be installed on a level substrate.
  • Installation Requirement: For proper bonding, medium bed mortar should be used in installing tiles with a dimensional length greater than 15 inches on any one side of the tile. Back buttering tiles of this nature in the installation process will also assure proper coverage for body.
For detailed installation instructions, please Click Here.
Don't see what you're looking for? 
No results found.
prev page 1 ... ... next page
prev page PREV
prev page PREV
NEXT next page
NEXT next page
Average Rating

Miles from Tulsa, Oklahoma wrote...
It's a nice low cost tile considering the quality. I will eventually add the matching wall tiles to go with the new floor.
All Review Images icon View all customer images
Your item was added to the cart
$0.00 total
reg. $0.00