Complete Your Order
Contact Us
8am - 8pm EST Monday - Friday
10am - 7pm EST Saturday

Mohawk Ava Terina Porcelain Tile

Price from
$2.33 sqft
$36.12 case, covers 10.67 sqft
reg: $3.11 sqft
case: $48.16

High variation
Selected Color: 
roll over image to magnify
CremaMohawk Ava Terina Porcelain Tile
Crema Mohawk Ava Terina Porcelain Tile Crema
GrigioMohawk Ava Terina Porcelain Tile
Grigio Mohawk Ava Terina Porcelain Tile Grigio
GialloMohawk Ava Terina Porcelain Tile
Giallo Mohawk Ava Terina Porcelain Tile Giallo
NoceMohawk Ava Terina Porcelain Tile
Noce Mohawk Ava Terina Porcelain Tile Noce

11 tiles per case
12" x 12"
Accessories for Mohawk Ava Terina Porcelain Tile
3" x 12"
Transitions tile flooring from the floor to the wall
$15.99 $21.32
Weight: 1.00lbs
Accessories banner
  • Details
  • Shipping and Returns
  • Maintenance
  • Installation Info
  • Warranty Info
Description - The Ava Terina collection by Mohawk offers a stunning marble look featuring Reveal Imaging technology for a realistic marble look. These durable floor tiles can be installed on any level of the home, allowing you to make any space into your dream room. Tough surface glazing provides an easy to clean and maintain flooring option that will look beautiful for many years to come. In many sizes and color options, the options are endless.
Material – Glazed porcelain tile with Reveal Imaging.
Size – Available as 12" x 12", 12" x 24", and 24" x 24" tiles.
Thickness – 3/8"
Shade Variation – High (V3)
Minimum Grout Joint Recommended – 1/8" (3/16” when rectangular sizes are used in a staggered brick-joint pattern, overlap not to exceed 33%)
Application – Floors, walls, and covered exterior patios.
Case Weight – Each 12x12 case weighs ~55 lbs, each 12x24 case weighs ~80 lbs and each 24x24 case weighs ~80 lbs.
Recommended Uses – Ava Terina tiles have been successfully installed in entry ways, family rooms, bedrooms, kitchens, office buildings, foyers, hallways, retail shops, stores, and more.

In Stock - Ships between Oct 16 - 16

Porcelain tiles are easy to keep clean and maintain. Maintenance of the floor typically includes:
  • Daily or weekly vacuuming or dropping of dirt, grit, dust etc.
  • Place door mats at all entrances to prevent tracked in dirt, rocks, moisture, and other debris.
  • Glazed tiles should be cleaned routinely with an all-purpose, low VOC household or commercial cleaner.
  • The entire area should be cleaned and scrubbed with cleaner solution by using a cotton mop, cloth, sponge, or non-metallic brush.
  • Routine cleaners should never contain hazardous or polluting products including, but not limited to acids or ammonia. Acids can damage the grout and the glazed surface of the tile, while ammonia can cause discoloration of grout.
  • When complete, be sure to rinse the entire area with clean water to remove all cleaning solution residue.
  • For detailed cleaning instructions, please Click Here.
General instructions for installing floor tile:
  • Tile must be installed over structurally sound substrates. Any damaged, loose or uneven areas must be repaired, patched and leveled.
  • Start by marking the center point of the room. Place a row of loose tiles along the center lines in both directions, leaving enough space for uniform joints (use tile spacers).
  • Using the notched side of the recommended trowel, comb adhesive into standing ridges by holding trowel at a 45-degree angle. Remove excess adhesive, leaving a uniform, ridged setting bed. Never spread a larger area than can be set in 15 minutes.
  • Measure tiles to be cut carefully and mark with a pencil or felt-tip pen. Make straight or diagonal cuts with a tile cutter and curved cuts with a nipper. Be sure to mix tiles from several cartons as you set, for a blended effect.
  • Begin installation in the center of the room. Finish each grid before moving to the next. Start with the first tile in the corner of the grid and work outward. Set tiles one at a time using a slight twisting motion. Insert tile spacers as each tile is set. Fit perimeter tiles in each grid last, leaving 1/4" gap between tile and wall.
  • When grid is completely installed, tap in all tiles with a rubber mallet or hammer and wood block, to ensure a good bond and level plane. Remove excess adhesive from joints with a putty knife, and from tile with a damp sponge.
  • Do not walk on tiles until they are set (usually in 24 hours).

Tips for installing large format floor tile:

  • Large size floor tile installation requires particular attention to proper subfloor preparation, grout joint sizing, trowel selection, and mortar coverage.
  • It is absolutely critical that large tile be installed on a level substrate.
  • Installation Requirement: For proper bonding, medium bed mortar should be used in installing tiles with a dimensional length greater than 15 inches on any one side of the tile. Back buttering tiles of this nature in the installation process will also assure proper coverage for body.
For detailed installation instructions, please Click Here.
For printable warranty information, please Click Here.


  • Durable porcelain tile with marble look.
  • For residential & commercial spaces.
  • Features Reveal Imaging Technology.
  • Random shade variation from tile to tile.
  • Beautiful natural stone look.


Customer Questions & Answers

Don't see what you're looking for? 
Your item was successfully added to cart
Large Product Image


$0.00 $0.00