7mm Textured Flex Tiles

Our 7 mm Textured Flex Tiles were designed to be super durable, multi use floor tiles. While the textured surface is smoother than the coin, it still provides a non-slip flooring surface that is easily cleaned. These garage floor tiles are made from virgin, hard wearing, proprietary PVC polymers that are injected molded at over 500 tons of pressure into molds with tolerances of 1/10, 000th of an inch. That makes them supremely resistant to most solvents and chemicals and provides excellent thermal and acoustic insulation. 

Recommended Uses - The 7mm Textured Flex Tiles are a durable and versatile floor tile. The textured floor tiles have been successfully used as home and commercial garage flooring, trade show flooring, retail store flooring, in stadiums and military bases, on storage shed and locker room floors, and in home gyms, airplane hangars and in commercial use garages, laundry room, utility room, mud room or, workout room flooring, and basement flooring to name a few. These tiles typically work well in any area where an extremely durable, resilient flooring surface would be useful that looks great and is easy to maintain.

Installation Instructions for 7mm Textured Flex Tiles

1. Preparation:

   • Ensure the subfloor is clean, dry, and free of debris.
   • If installing over concrete, make sure it's cured (at least 30 days old) and dry.
     
     

2. Layout:

   • Plan the layout of the tiles in advance. It's recommended to start from the center of the room and work outwards for a balanced appearance.
     
     

3. Cutting Tiles:

   • Use a utility knife to cut tiles as needed to fit around edges and corners. Measure carefully to ensure a precise fit.
     
     

4. Installation:

   • Place the tiles snugly against each other without gaps. Do not use adhesives, as these tiles are designed to interlock securely.
   • For areas where tiles might shift, consider using double-sided tape along the perimeter.
     
     

5. Finishing Touches:

   • After installation, walk over the tiles to ensure they are properly locked into place.

Maintenance and Care

1. Regular Cleaning:

   • Sweep loose dirt, dust, or debris from the floor as needed.
   • Periodically damp mop with a mild soap and water solution (common soaps include dish detergent or Tide laundry detergent).
     
     

2. Stain Management:

   • Be aware that this product is not stain-proof. Street tar and performance tires can stain light-colored tiles.
   • For minor stains, use a cleaner like Purple Power. However, stubborn stains may not be removable. If issues persist, contact Customer Service at 800-613-0996 for assistance.
     
     

3. Avoid Harsh Chemicals:

   • Do not use harsh chemicals or abrasive cleaners, as they may damage the tile surface.
     
     

4. General Tips:

   • Regularly inspect the tiles for any signs of wear or damage.
   • Address spills promptly to prevent staining.