Nitro Pro Garage Floor Tiles - 12" x 12" x 5/8"

Installation Instructions for Nitro Tiles Pro:

Step 1: Prepare the Surface

• Ensure the garage floor is clean, dry, and free from dust, dirt, or debris.
• Sweep or vacuum the area before starting the installation. No adhesives or underlayment are required.
  
  

Step 2: Plan Your Layout

• Measure the area to be covered and plan your tile layout, starting from the center or one corner of the room.
• Leave a 1/2" gap between the tiles and walls or other fixed objects to account for expansion. The tiles should sit snugly against each other — the gap belongs at the perimeter, not between the tiles.
  
  

Step 3: Begin Installation

• Align the edges of the tiles and snap them together using the hidden interlock system.
• Continue connecting tiles until the entire area is covered, ensuring each tile is securely locked into place.
• If needed, trim tiles using a utility knife to fit around corners or obstacles.
  
  

Step 4: Final Touches

• Install edge pieces for a clean finish.
• Tiles can be cut to fit with a sharp utility knife for any tight spaces.
  
  

Step 5: Avoid Car Jack Damage

• Nitro Tiles Pro are not car jack approved. Always use your jack on concrete or place a plywood board or steel plate beneath the jack to prevent damage.

Why the gap matters:

Nitro Tiles Pro are a floating floor. Hard plastic expands and contracts as garage temperatures swing between summer and winter, so the floor is built to move as one sheet rather than being fixed down. Two things make that work: every joint in the hidden interlock carries a designed-in tolerance, and the 1/2" perimeter gap gives the whole field somewhere to go. Leaving no gap at the walls is what makes a plastic tile floor lift at the edges.

Care and Maintenance for Nitro Tiles Pro:

Regular Cleaning:

• Sweep or vacuum the tiles regularly to remove dirt, dust, or debris.
• Occasionally damp mop with a mild soap and water mixture. Common soaps include Dawn dish detergent or Tide laundry detergent.
  
  

Spill Management:

• The tiles are resistant to oil, gas, and household chemicals, but spills should be wiped up quickly to maintain cleanliness.
  
  

Handling Stains:

• While Nitro Tiles Pro resists most stains, street tar or performance tires can leave marks on lighter-colored tiles. Use a cleaner like Purple Power to address tar stains.
• For tire marks that don't come off, replacing the affected tiles or using darker tiles can help disguise stains.
  
  

Note on Color Variation:

• Garage tiles are produced in batches, leading to possible color variations between samples and your order. Colors like graphite and gunmetal are particularly prone to variations between batches.
• To ensure consistency, it's recommended to order extra tiles for mistakes or replacements.
  
  

Replacement and Repairs:

• Damaged or stained tiles can be replaced by snapping out the affected tile and installing a new one.
  
  

Customer Support:

• If the staining on your floor persists, contact Customer Service at (866) 416-6388 for further assistance..