Diamond Grid-Loc Garage Floor Tiles™ - 12" x 12" x 1/2"

Easy snap-together installation
UV stable and can be used outdoors
Slip and stain-resistant
Rolling weight of 36,000 lbs
Can be used with other Grid-Loc tiles

View All

Select A Color:

Select An Option

More Information

Diamond Grid-Loc Garage Floor Tiles are engineered for the toughest garage flooring environments, providing unmatched strength and durability. These interlocking garage floor tiles can support extremely heavy rolling vehicle loads while resisting oil, grease, antifreeze, and other household chemicals. They’re also stain-resistant, odorless, slip-resistant, and UV stable, making them a long-lasting solution for garage floor protection. Installation is simple—snap together adjacent garage tiles to create a beautiful, customizable garage floor covering. For even more design flexibility, Diamond Grid-Loc Garage Floor Tiles are fully compatible with Vented Grid-Loc Garage Floor Tiles, allowing you to create unique patterns and layouts. These high-performance garage floor tiles come with an industry-leading 12-year warranty for peace of mind.

Details

InstallationInterlocking
Car Jack ApprovedNo
Chemical-ResistantNo
ColorfastNo

Installation Instructions for Grid-Loc Diamond Series Tiles:

Step 1: Prepare the Subfloor

Make sure the garage floor is clean, dry, and free from dust, dirt, or debris.
Sweep or vacuum the surface before installation.

Step 2: Plan the Layout

Measure the area and decide on the tile layout. Start from a corner or the center of the room.
Leave a 1/2" gap between the tiles and walls or stationary objects to allow for expansion.

Step 3: Snap the Tiles Together

Align the edges of each tile and snap them together using the hidden interlock system.
Continue connecting tiles until the floor area is fully covered.
If necessary, trim the tiles using a utility knife to fit around obstacles like walls or corners.

Step 4: Final Adjustments

After covering the entire area, you can add edge pieces for a cleaner look.
Ensure each tile is securely locked into place.

Step 5: Avoid Car Jack Damage

These tiles are not car jack approved. Always use your jack directly on the concrete floor to avoid damage to the tiles.

Care and Maintenance for Grid-Loc Diamond Series Tiles:

Regular Cleaning:

Sweep or vacuum the tiles regularly to remove loose crumbs, dust, or debris.
Occasionally damp mop the tiles using a mild soap and water mixture. Some commonly used soaps include Dawn dish detergent or Tide laundry detergent.

Spill Management:

The tiles are resistant to oil, grease, antifreeze, and many household chemicals, but spills should still be wiped up promptly for safety.

Handling Stains:

While the tiles are stain-resistant, clean up spills as soon as possible to prevent any long-term damage or staining.

Tile Replacement:

If a tile becomes damaged, snap out the affected tile and replace it with a new one.

30 Day Money Back Guarantee, 12-Year Warranty.

Reviews

Questions

Customer Questions And Answer

Our Diamond Grid-Loc tiles are a hard plastic tile and will keep your epoxy floor protected from the heat of the tires. Water and other liquids will flow between and underneath the tiles to a drain or out of your garage.

Our Diamond Grid-Loc Tiles are made with a hard polypropylene plastic that is ideally suited for any garage. These tiles are resistant to most household and vehicle chemicals and will not get brittle in freezing temperatures. Snow, ice, and salt are not a problem for these tiles either as they allow any melted snow and ice to flow through and under the floor allowing for the water to run out of your garage or to a drain.

Ideally, we would recommend installing our Diamond Grid-Loc Tiles over concrete or asphalt. When placed over dirt, there is potential for the tiles to embed themselves into the dirt. This may create an uneven surface that is unsightly and not the safest.

You can replace a single Diamond Grid-Loc Tile with the use of a paint can opener. Place the opener on one end of the tile and pull up. Once removed, you can place the new tile in its place.

We do ship to Canada and you would be able to remove dirt and grime from our Diamond Grid-Loc Tiles with ease. We recommend using a hose and broom.

You can use our Diamond Grid-Loc Tiles in a garage where there will be water and a slope. Since these tiles allow water to flow between and under the floor, you don't necessarily need to use one of the Vented Grid-Loc Tiles, but you can interlock our Vented Grid-Loc Tiles with our Diamond Grid-Loc Tiles for that purpose.

Our Diamond Grid-Loc Tiles are very safe and are constructed with a hard polypropylene plastic.

Our Diamond Grid-Loc Tiles are non-combustible.

Our Diamond Grid-Loc Tiles would work as flooring in a barber shop. Due to the extended amount of standing that is required to cut a person's hair, we would recommend going with our Diamond Flex Tiles which provide more comfort under foot. Our Diamond Grid-Loc Tiles can be placed on? a linoleum floor.

Our Diamond Grid-Loc Tiles are a hard plastic tile that may not give you the type of give you are looking for. Also, even though they feature a diamond patterned top, they still may not give you the type of traction you need for your exercises. For those types of exercises, we recommend going with one our rubber flooring options.

Our Diamond Grid-Loc Tiles have been used all over the US and Canada and hold up excellently to all types of climates. These tiles are made from a hard polypropylene plastic and are resistant to most household and vehicle chemicals. So salt, sand, and snow will not be a problem for these tiles.

Our Diamond Grid-Loc Tiles can be used on a wood deck.

The Diamond Grid-Lock Tiles would reduce the effect of the radiant heating system. They will not transfer the heat like porcelain or ceramic tile would.

We do not recommend placing car jacks over our Diamond Grid-Lock Tiles because there is a potential for the tile(s) to crack.

You can use install our Diamond Grid-Loc Tiles over a concrete floor in your basement. These tiles are a floating interlocking floor and are resistant to staining, mold, and mildew growth. With the diamond pattern on top, they are also very slip resistant.

These tiles are slip resistant when wet. Water will flow between the tiles and the pattern on the tiles will help to provide ample traction when wet.

Our Grid-Loc Edges are 3" long x 12" wide. The corners are 3" long x 15" wide.

You will not have to seal your concrete floor if you install our Diamond Grid-Loc Tiles. When installed, these tiles have a gap that allows for any moisture to travel up or down through the floor to either a drain or out of your garage. Some moisture may still get trapped if coming up from the garage, and some sweating may also be present. This is not harmful to the tiles, and with the diamond pattern will not create a slip hazard. If the moisture is still a huge, you can pull up the flooring...

Putting a 4mm Rubber mat under our Diamond Grid-Loc Tiles is a great way to help to quiet the flooring and also provide some added cushion underfoot. So we are totally on board with adding that under your floor.

You can install our Diamond Grid-Loc Tiles over concrete that has a floor heat system in it. The heat from the system will not melt the tiles. Since our Diamond Grid-Loc Tiles are non-porous, you may not get the full effect of having the system, but you will get some since these tiles do have some gapping between the tiles.

Our Diamon Grid-Loc Tiles are mold and mildew resistant. Mold and mildew can grow if there is organic material, but it would not grow under the tiles. The only thing that you might notice is if you have a water issue with your concrete, you may get some salt accumulation under your tiles. This can be easily cleaned and will not affect the tiles in any way.

Our Diamond Grid-Loc Tiles are a 1/2" thick.

The best way to cut our Diamond Grid-Loc Tiles around a circular post is to measure the area and then mark the tiles that would need to cut. If you interlock all the tiles together with the marking, you could use a rotary saw to cut the tiles.

You can install our Diamond Grid-Loc Tiles outdoors. When installing these tiles, you will want to make sure there is plenty of space around the tiles for expansion and contraction. We recommend at least a 1/2". These tiles will hold up outdoors as they are constructed with polypropylene, which is a hard plastic meant to endure the rigors of being installed in a garage or workshop environment. The only thing that you will notice when installing these tiles outdoors is that there might be some...

We do not recommend placing car jacks over our Diamond Grid-Lock Tiles because there is a potential for the tile(s) to crack. You can place a piece of metal sheet or plywood between the stand the tiles. This will help to disperse the weight and help to keep the tiles from cracking.

Correct, these tiles are hard plastic. You should look at one of our flex garage tiles if you're looking for a soft tile.

The tiles are very dense, so using a utility knife may be very time consuming but you can certainly do it.

You can absolutely cut the tiles to fit your space instead of using edging.

No, not by itself. We'd recommend using a sheet of plywood underneath the car jack to help distribute the weight of the vehicle.

The tiles may expand / contract normally but it would be minimal.

Water would lead through the seams as they are not water tight. A roll would be a better choice for you.

Hard plastic tiles can slip and move when installed directly over epoxy. For this, we would recommend installing an underlayment between the tiles and the epoxy floor to give added grip / traction.