Description - Get our most popular rubber tile color now with no minimum with our 8mm Designer Series Rubber Tiles – Coffee Creek. Whether you need 1 tile or 100, you can now order as many tiles as you need to floor your new space. These tiles come in center tiles and are very easy to cut to fit any room. Resistant to mold and mildew growth, these tiles are very slip resistant even when wet. A 5- year warranty backs our Coffee Creek interlocking rubber tiles.
Material – These resilient interlocking floor tiles are constructed of recycled SBR rubber and high colored virgin rubber.
Size – 23” x 23” (Note: Tiles can be interlocked with our standard 8mm Strong Rubber Tiles)
Thickness – 8 mm thick (approx. 5/16")
Weight – Each gym tile weighs approximately 8 Lbs.
Recommended Uses – Our designer series strong rubber tiles are one of our best selling tile solutions available due to the wide variety of color options that have been used in a wide variety of applications. The most common use of these tiles is as a general sports flooring. Some common examples include weight room flooring, as a resilient flooring for use in home gyms, and as commercial rubber gym floor covering. Some other ways this flooring has been used successfully in the past include as playroom flooring, as interlocking dog kennel mats, and as a basement rec room floor system. These tiles truly offer a multi-use flooring solution where a shock absorbing, anti-fatigue floor solution would be useful.
In Stock - Ships between Jul 25 - 26
Strong rubber tiles are very durable, easy to maintain, and easy to keep clean. Maintenance of these rubber gym tiles typically includes:
- Vacuuming any loose crumbs, dust, or debris from the gym floor covering surface when necessary.
- Occasional damp mopping of the sports flooring with a mild soap and water solution. A few recommended soaps are Dawn dish detergent or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.
For more detailed cleaning instructions and commercial cleaning instructions, Click Here.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Snap a chalk line on the sub floor 24” from one wall in your room. Snap another chalk line on the subfloor 24” from an adjacent wall. You should now have a pair of perpendicular lines making an approximate 90-degree angle.
- Begin laying the interlocking tiles along the chalk lines, snapping the locks together as you go. Arrows are located on the back of your tiles, when installing the tiles all the arrows should be pointing in the same direction.
- Leave the perimeter of the room open until the field is installed.
- After the field is covered, go back and cut in tiles along the walls in the room. It is recommended to leave a gap along the wall roughly the thickness of the tiles being used to account for expansion and contraction of the floor in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.
For printable installation instructions, please Click Here.