West Coast Rubber Pavers - Patio & Deck Outdoor Tiles

Brick Top available in 3/4" thickness.
Shock-absorbent.
Recycled rubber construction ensures a safe anti-slip surface.
Long lasting 5 year warranty.
Available in 11 standard colors.

View All

Select A Color:

Select An Option

More Information

Rubber Paver Tiles, shipped from our west coast location, offer a durable and comfortable outdoor flooring surface that is easy to install, slip-resistant, and easy to maintain. Made from recycled rubber, these tiles are water permeable, allowing for proper drainage, and come with a 5-year limited manufacturer's warranty.

Recommended Uses: Our outdoor rubber paver tiles are versatile and can be used in a variety of settings. They make an excellent flooring option for outdoor patios, pool decks, walkways, and even around horse stalls. Additionally, these tiles have also been used as a durable gym floor covering. Whether you're looking for a slip-resistant surface or a low-maintenance flooring option, our rubber paver tiles are the perfect solution for your outdoor needs.

California Prop 65 Warning: This product contains chemicals known to the state of California to cause cancer, or birth defects or other reproductive harm.

Details

Recycled ContentNo

Installation Document

For 1/2" thick rubber paver tiles, it is recommended to adhere the tiles to a substrate such as an outdoor concrete pad, wood asphalt, or compacted gravel using a polyurethane adhesive. This adhesive is ideal for handling freezing and thawing, and is moisture-cured.
3/4" thick rubber paver tiles can also be adhered using a polyurethane adhesive.

Installation Document

Maintaining your outdoor rubber paver tiles is easy and simple. Here are a few tips to keep them looking great:

Sweep the surface of the tile with a stiff outdoor bristle broom when necessary to remove any loose debris.
For more stubborn dirt or stains, use a mild soap and water solution and gently scrub the tiles with a soft nylon bristle brush or mop.
Spray or hose off the tiles with clean water as needed to remove any remaining debris.
If necessary, you can vacuum the surface of the recycled rubber tiles with a shop vac to remove any dirt or debris that may have accumulated.

Note: Do not use any harsh chemicals or solvents on the tiles, as this may damage the surface of the rubber. Also, avoid using high-pressure washers or steam cleaners, as these can cause damage to the tiles as well.

Installation Document

5-year warranty.

Installation Document

Reviews

Questions

Customer Questions And Answer

Our Paver Tiles - West Coast can be laid over grass. When installing these tiles over grass it is recommended that a weed fabric be placed under the tiles to prevent grass from growing between the tiles. The tiles do not interlock to each other but can be glued together with a polyurethane seam sealer glue.

Our Paver Tiles - West Coast tiles can be glued to a concrete driveway. You will want to use a polyurethane adhesive.

Our Paver Tiles - West Coast can be laid over dirt. When installing these tiles over dirt, it is recommended that a weed fabric be placed under the tiles to prevent grass from growing between the tiles. The tiles do not interlock to each other but can be glued together with a polyurethane seam sealer glue.

Our Paver Tiles - West Coast tiles can be laid over stone. As long as the sub surface is smooth and solid, our paver tiles can be laid over it.

Our Paver Tiles - West Coast can be cut to fit a cement porch and steps.

Our Paver Tiles - West Coast tiles are too thin for dowels. Thus, we recommend the usage of glue.

Our Pave Tiles - West Coast can be installed over a wood deck outside where the temperature goes below freezing and there is snow.

You can install our Paver Tiles - West Coast over a wood deck, but if you are worried about mold and mildew growth, we recommend placing a plastic sheet under the tiles. With this plastic sheet, you can place holes strategically between the boards to reduce the amount of moisture that may come in contact with the deck.

Our Paver Tiles - West Coast can be installed on your deck. As long as the tar is not fresh, the flooring will be safe over the tar. If you are concerned at all that the flooring may be affected by the tar, you can always place a plastic sheet underneath the floor. Another product that will work great on your deck is our Deck Top Roof Tiles.

Unfortunately our 3/4" Paver Tiles - West Coast are not installed with dowels. These tiles would need to be installed with glue. These tiles can be laid over concrete, asphalt, and wood.

Our Paver Tiles - West Coast are water permeable.

We do offer a ramp that can be cut down to fit up to our Paver Tiles - West Coast. The ramp is 1" thick and is 4" wide by 48" long.

Our Paver Tiles - West Coast can be used as flooring under a parked boat. These tile are very dense and are able to withstand a very large load on top of them.

We recommend using a serrated blade.

You can install our Paver Tiles - West Coast over a rubber roof without damaging it.

Our Paver Tiles - West Coast can be installed over cracking concrete. If there is a great variance in the height of the concrete around the cracks of more than an inch, then you may need to repair the concrete first before installing the tiles.

Our Paver Tiles - West Coast comes in two surface patterns. The room scene image is of the Brick Pattern, and we also offer a smooth top version. You can order either version in the drop-down menu for this product.

All of our rubber paver tiles are water permeable. They will allow water to flow through the tiles to prevent water from pooling on the surface.

Our Paver Tiles - West Coast can be used indoors or out.

Our Paver Tiles - West Coast are water permeable. This keeps water from pooling on the flooring surface. These tiles are very easy to clean. You can use a leaf blower to remove any large dirt and debris and for any stuck on dirt and debris; we recommend using a hose to remove. Since there are typically root systems and the stump to the tree, you may have to cut the tiles to fit the area properly. You can do this with a large bread knife and a straight edge.

You can install our Paver Tiles - West Coast on a TPO or PVC membrane roof. These tiles are very durable and are resistant to the elements. They are also very slip-resistant even when wet and are resistant to mold and mildew growth. These tiles are water-permeable, so they will allow water to flow through them. This will ensure the drainage characteristics of your roof will stay intact. You don't have to adhere these tiles to the roof with anything. You can loose lay them as they are pretty...

Our Paver Tiles - West Coast will get hot in direct sunlight but will be cooler than concrete. You can shovel snow off our rubber paver tiles with a plastic shovel. Don't use a metal shovel as this will damage the tiles. Chipping ice on these tiles will be a little difficult if you are using a metal pick. We would suggest using salt and other materials to prevent ice from forming on the tiles. These tiles do drain fairly fast, so you won't have to worry about any ice damming issues. The ...

Our Paver Tiles - West Coast can be painted. You can use an acrylic paint on these rubber pavers or a two-part urethane adhesive paint system.

Yes, you may lay our Paver Tiles over brick steps, as long as the brick is in good condition and free of defects, since we recommend installing these pavers over a hard surface. You may use our Polyurethane adhesive to glue the pavers down.

You can install our Paver Tiles - West Coast on a hot-mopped roof. As long as the structure can handle the weight, these tiles are a great option for a rooftop patio.