Catalina Cool Turf Rolls

Transform your lawn into a vibrant, year-round green oasis with Catalina Cool Turf Rolls. This plush artificial turf is designed to mimic the lush, inviting look of Bermuda grass, Catalina Cool Turf ensures your outdoor space remains lively and attractive, even in the off-season. Thanks to its patented CoolFlo yarn technology, this high-performing astroturf stays 15 degrees cooler in direct sunlight than standard artifiicial grass products, allowing you to enjoy your out-door recreation even in the summer heat! Easy to clean and maintain, Catalina Cool Turf Rolls are backed by a 15-year warranty, making it a durable and reliable artificial grass choice for any space. 

Note: Catalina Turf Rolls are certified to be 100% free of lead and hazardous heavy metals for added peace of mind.

Recommended Uses: Catalina Cool Turf Rolls are the perfect alternative to natural grass in your lawn and are typically used as landscape turf in back yards, front yards, pet-care facitilites and much more.

Installation Instructions for Catalina Cool Turf Rolls

Outdoor Installation

1. Surface Preparation:

   • Remove Existing Vegetation: Clear all grasses, sods, mulches, and debris from the marked areas. For landscaping around trees, shrubs, flowers, light poles, or utilities, mark these areas and account for the turf edge configuration. Leave space around tree bases.
   • Cap Sprinklers: Cap any unused sprinklers at the pipe level to prevent leaks. Relocate and mark electrical sprinklers and wiring, moving them inward by 6-8 inches to avoid damage during installation.

2. Base Construction:

   • Install Decomposed Granite (DG): Spread a 3-inch layer of DG (a mix of gravel and sand) for proper drainage. Level and compact the base using vibrating, tamping, and rolling techniques until it is flat and stable. Wet the base to help it settle.
   • Optional Turf Pad: If using a turf pad, cut a hole in the base to match the size and depth of the pad.

3. Weed Cloth (If Applicable):

   • Lay Weed Cloth: Roll out weed cloth to prevent weeds from growing through the turf base. Overlap edges by 6 inches and secure with flat-head nails. Trim to fit with a 1/4” border. Avoid driving nails too deeply to prevent dimpling.

4. Turf Installation:

   • Align Turf: Use a straight edge or perpendicular edges to align the turf. Temporarily secure the edges with nails while adjusting the turf.
   • Cut and Fit: Over-cut the turf by one inch along the edges for a proper fit. This excess will be used for the tucking process.
   • Seam Turf: Use a seaming tool to cut turf in an S-shape to avoid visible seams. Install nails every 6 inches along edges, driving them 3/4 of the way down. For seams, use 6-inch U-nails every 6 inches, ensuring they are level and hidden.
   • Tuck and Brush: Tuck edges against hardscapes or borders using a wonder bar for a clean finish. Brush the turf against the grain to lift the fibers. Apply and spread infill or sand evenly to support the blades and add weight. Brush again to settle the infill and stabilize the turf. Remove any excess debris.

5. Videos: For detailed visual guidance, visit our website’s installation video library.

Indoor Installation

1. Surface Preparation:

   • Clean and Level: Ensure the surface is clean, level, and dry. Suitable surfaces include concrete, dusting concrete, gypcrete, pressure-treated decking, wood, or backer board.

2. Dry Lay and Alignment:

   • Dry Lay: Unroll the turf to check fit and alignment. Refer to the back of the turf for manufacturing details to determine fiber direction.

3. Adhesive Application:

   • Apply Adhesive: Use adhesive or double-sided tape on the surface. If using a turf pad, install it with tape or glue.
   • Lay Turf: Position the turf and apply a bead of seam sealer to all seams.
   • Roll: Use a 75 lb. weighted roller to press down the turf across its width and length.

4. Curing:

   • Allow to Cure: Keep the installation in dry conditions for 72 hours to ensure the adhesive cures properly.

Maintenance Instructions for Rolled Artificial Turf:

Maintaining your rolled artificial grass is essential to ensure its longevity and pristine appearance. Here are the steps to keep your turf looking its best:

Regular Cleaning:

• Periodically rake the turf with a plastic rake to remove leaves, twigs, and other debris. This helps to keep the surface clean and prevents the buildup of organic material that can encourage weed growth.
• Avoid using metal rakes, as they can damage the turf fibers.

Brushing:

• Use a power brush or a heavy-bristled brush to brush the turf against the grain. This will help to keep the blades upright and maintain the natural look of the turf.
• Brushing also helps to evenly distribute the infill and ensure proper support for the turf fibers.

Stain Removal:

• For spills or stains, clean the affected area promptly with a mild soap and water solution. Avoid using harsh chemicals that could damage the turf fibers.
• For tougher stains, a mixture of vinegar and water can be used. Rinse the area thoroughly with water after cleaning.

Weed Control:

• Although weed cloth helps prevent weeds, occasional weeds may appear around the edges or seams. Remove any weeds by hand to prevent them from taking root.
• If necessary, apply a water-based herbicide that is safe for synthetic turf to control weed growth.

Pet Maintenance:

• For areas used by pets, regularly remove solid waste and rinse the area with water to prevent odors.
• Use a turf deodorizer if needed to keep the area smelling fresh.

Infill Maintenance:

• Check the infill levels periodically and add more if needed to ensure the blades remain upright and the turf retains its resilience.
• Over time, infill can settle or be displaced, so it’s important to top it up as required.

By following these maintenance steps, your artificial turf will remain clean, attractive, and in excellent condition for years to come.