Daytona Turf Rolls

Experience the ultimate in artificial grass with Daytona Turf Rolls—our densest and most plush option. Featuring resilient, soft matte fibers in a rich blend of earthy greens, Daytona Turf Rolls are perfect for high-traffic areas and are sure to impress. With memory fibers and a reduced shine, these rolls offer a realistic look and feel while being safe for pets and children. UV stable and resistant to heat and frost, Daytona Turf Rolls come with a 15-year warranty and are free of lead and heavy metals.

Recommended Uses – Daytona artificial turf is great for any outdoor application and can be found as landscape turf, doggy day care flooring and much more.

Installation Instructions

Outdoor Installation

1. Surface Preparation:

• Clear Area: Remove existing grass, sod, mulch, and other materials from the installation site. If landscaping around obstacles, mark the area and account for turf edge configurations. Leave space around tree bases.
• Cap Sprinklers: Cap any unused sprinklers at the pipe level to prevent leaks. Relocate and mark unused sprinklers. Move electrical sprinklers and wiring inward by 6-8 inches to avoid damage during installation.

2. Base Construction:

• Install Base: Use decomposed granite (DG) for proper drainage. Spread DG to a depth of 3 inches, level, and compact by vibrating, tamping, and rolling until flat. Allow it to settle properly.
• Optional Turf Pad: If using a turf pad, cut a hole in the base to match the pad’s size and depth.
• Roll Out Weed Cloth: Lay weed cloth over the base to prevent weed growth, overlapping edges by 6 inches and securing with flat-head nails. Trim to fit with a 1/4” border. Avoid driving nails too deeply.

3. Lay Turf:

• Align Turf: Use straight or perpendicular edges for alignment. Square the turf to minimize cutting and fitting. Secure edges with temporary nails.
• Cut and Fit: Over-cut the turf by one inch along the edges. This excess will be used for tucking.
• Seam Turf: Use a seaming tool to cut turf in an S-shape to avoid discoloration. Install nails every 6 inches along the edge, driving them 3/4 of the way. Use U-nails every 6 inches for seams, ensuring they are level and hidden.
• Tuck and Brush: Tuck edges with a wonder bar for a clean look. Brush against the grain to lift fibers. Apply and spread infill or sand evenly. Brush again to settle the infill and stabilize the turf. Remove excess debris.

Indoor Installation

1. Surface Preparation:

• Clean and Level: Ensure the surface is level, clean, and dry. Suitable surfaces include concrete, dusting, powdering concrete, gypcrete, pressure-treated decking, wood, or backer board.
• Dry Lay: Unroll the turf to check fit and alignment. Manufacturing details stamped on the backing will guide fiber direction.

2. Adhesive Application:

• Apply Adhesive: Use adhesive or double-sided tape on the surface. If adding a turf pad, install it over the base with tape or glue.
• Lay the Turf: Position the turf and apply a bead of seam sealer to all seams.
• Roll: Use a 75 lb. weighted roller to press down the turf across its width and length.
• Cure: Allow the installation to remain in dry conditions for 72 hours for proper adhesive curing.

Maintenance

1. General Cleaning:

• Sweeping: Periodically sweep loose dirt, dust, and debris from the turf surface.

2. Stains and Blemishes:

• Clean: Use a warm water solution with household detergent. Avoid bleach.

3. Animal Urine:

• Clean: Use a mixture of white distilled vinegar and water. Flush thoroughly and vacuum any excess solution.

4. Chewing Gum:

• Remove: Use dry ice or refrigerant packets to freeze and remove gum.

5. Matted Turf:

• Brush: Use a synthetic brush to lift matted fibers. Avoid metal or wire-bristled brushes.