Launch Turf Rolls

Our Launch performance turf is engineered to mimic the look and feel of grass all year round, without the pesky maintenance. These short pile turf rolls require no infill and provide an ideal surface for indoor applications from putting greens to locker rooms. Your indoor turf can be backed with our Gym Turf Pad which is a foam cushion providing shock absorption and thermal insulation allowing it to perform in high traffic areas. The turf layer is made from a polypropylene fiber that provides a turf that is softer than nylon and highly UV stable. Backed by a 5 year warranty these turf rolls will provide a real grass for years to come. Material PP fiber with a synthetic backing Color Olive/Field Green Width 12' Thickness 3/8" Face Weight Approx. 24 oz Weight Approx. 0.32 lb per sq-ft. Application Indoor/Outdoor Drainage Yes Length Custom (max. 100') UV Stable Yes Warranty 5 years Pet friendly Yes

Installation of our rolled turf flooring is very easy and typically done by our customers. Below are instructions for both outdoor and indoor installation of our rolled flooring. Glue Down Outdoor Installation First you will want to make sure that your surface is level, clean and dry. Our turf flooring can be installed on concrete, asphalt, pressure treated decking, and composite decking. Next you will want to dry lay your turf to implement roll sequencing to minimize normal variations. Manufacturing details will be backstamped on one side of the backing, this will assist in determining fiber direction. Apply pressure sensitive adhesive or double sided tape and then lay the turf. Apply a bead of seam sealer to all seams. Roll the product with a 75 lb. Weighted roller across the width and length of the product surface. Once completed, the installation must remain in dry conditions for 72 hrs. in order for the adhesive to cure properly. Non-Infilled Synthetic Lawn Outdoor Installation Area Prep First you will want to remove all grasses, sods, mulches, etc from the marked areas. Note: If you are landscaping around trees, shubbery, flowers, light poles, utilities, etc., remember to mark around those areas and account for the turf edge configuration. Remember to leave ample area uncovered around the bases of trees. Base Construction It may be necessary to compact the native soil/subgrade prior to base construction. Add a base of crushed rock and level it with a landscaping rake. Ideally, the base should be approximately 3” thick. After spreading, spray with water and use a hand tamp to compact the area. This typically takes 2-3 passes. Let the compacted area dry and check for any inconsistencies in the area. Lay Turf Roll the synthetic turf out on top of the constructed base. Note: If the site requires multiple rolls, be sure to have the grain of the fibers on each roll of turf running in the same direction. If using multiple rolls, trim the untufted edge. Around the borders, trim the turf to mat the edges. Gluing The Seam Fold the adjacent trimmed edges of two rolls of turf approximately two feet apart the entire length of the seam. Roll out the seaming tape and apply adhesive with a 1/8” trowel. Center the seaming tape and lay the edges of each roll of turf directly onto the tape making sure not to bury or trap the synthetic grass fibers. Make sure no tape is showing and that the two pieces of turf are butting up against each other so that the joint is invisible. Add weight to the seams and allow time for the adhesive to cure overnight. Secure Turf On Edges And Brush Steak down the turf along the perimeter every three feet or so with landscape spikes. Fibers are usually matted down so use a stiff bristled broom to stand the fibers up. Sand infill is optional. Glue Down Indoor Installation First you will want to make sure that your surface is level, clean and dry. Our turf flooring can be installed on concrete, dusting, powdering concrete, gypcrete , pressure treated decking, wood, or backer board. Next you will want to dry lay your turf to implement roll sequencing to minimize normal variations. Manufacturing details will be backstamped on one side of the backing, this will assist in determining fiber direction. Apply adhesive or double sided tape and then lay the turf. Apply a bead of seam sealer to all seams. Roll the product with a 75 lb. Weighted roller across the width and length of the product surface. Once completed, the installation must remain in dry conditions for 72 hrs. in order for the adhesive to cure properly.

Periodic sweeping of loose dirt, dust, and debris may be necessary to keep the flooring surface clean.

5 Year Warranty