Intensify Turf Rolls

Elevate your space with Intensify Turf Rolls, a premium upgrade from our Launch line. These thicker rolls are perfect for both indoor and outdoor installations and can be paired with our Gym Turf Pads for enhanced shock absorption and thermal insulation. Ideal for pets and hassle-free maintenance, Intensify Turf Rolls offer an easy-care alternative to natural grass without attracting pests. Backed by a 5-year warranty, they are a versatile choice for various applications, from home gyms to pet areas.

Installation Instructions

Outdoor Installation

1. Surface Preparation:

• Ensure the surface is level, clean, and dry. Suitable surfaces include concrete, asphalt, pressure-treated decking, and composite decking.

2. Dry Lay:

• Unroll the turf and lay it out to check for fit and alignment. Look for manufacturing details stamped on the backing to determine fiber direction.

3. Adhesive Application:

• Apply pressure-sensitive adhesive or double-sided tape to the surface.
• Lay the turf on top, ensuring full contact with the adhesive.

4. Seaming:

• Apply seam sealer to all seams. Use seaming tape and adhesive with a 1/8” trowel, ensuring that the turf edges butt up against each other without trapping the fibers. Press down firmly.

5. Rolling:

• Use a 75 lb. weighted roller to smooth the turf across its width and length.

6. Curing:

• Allow the installation to remain in dry conditions for 72 hours to ensure the adhesive cures properly.

7. Non-Infilled Synthetic Lawn Installation:

Area Prep:

• Remove existing grass, sod, and mulch. Mark areas around trees, shrubs, and other obstacles, leaving space around tree bases.
  

Base Construction:

• Compact the soil or subgrade, then add a 3” thick layer of crushed rock. Level and compact the base using a hand tamper. Allow the area to dry and check for evenness.

Turf Placement:

• Roll out the turf over the prepared base. Ensure fiber grain is consistent if using multiple rolls. Trim edges as needed.
  

Seaming and Securing:

• Fold and seam turf edges, apply seaming tape and adhesive, and press the edges together. Secure the turf with landscape spikes every 3 feet. Brush the fibers to lift them and achieve a natural look. Sand infill is optional.

Indoor Installation

1. Surface Preparation:

• Ensure the surface is level, clean, and dry. Suitable surfaces include concrete, gypcrete, pressure-treated decking, wood, or backer board.

2. Dry Lay:

• Unroll and lay out the turf to check alignment and fiber direction.

3. Adhesive Application:

• Apply adhesive or double-sided tape to the surface.
• Lay the turf, ensuring full contact with the adhesive.

4. Seaming:

• Apply seam sealer to all seams. Use a 75 lb. weighted roller to press the turf into place.

5. Curing:

• Allow the installation to remain in dry conditions for 72 hours to ensure proper adhesive curing.

Maintenance

1. Regular Cleaning:

• Sweep or vacuum the turf periodically to remove loose dirt, dust, and debris.

2. Spot Cleaning:

• For stains or spills, clean with mild soap and water. Avoid using harsh chemicals.

3. Brushing:

• Occasionally brush the turf fibers with a stiff-bristled broom or power brush to keep them upright and looking natural.

4. Pet Care:

• For pet areas, rinse with water as needed and ensure proper drainage to prevent odor buildup.

Intensify Turf Rolls provide a robust, low-maintenance alternative to natural grass, enhancing your space with durability and ease of care. Enjoy the benefits of easy installation and minimal upkeep with our premium turf rolls.