Our 5/8" Premium Soft Foam Tiles are an excellent choice for an easy-to-install safe and cushioned flooring. Available in versatile design-friendly neutral tones as well as multiple fun bright colors, these interlocking foam tiles can stylishly update any room with custom patterns like checkerboards, stripes, and more. The water-resistant, shock-absorbent, and insulating design makes these tiles the perfect flooring option for any playroom, bedroom, exercise room, or basement. Each soft and durable interlocking foam tile comes with two detachable edge pieces for a professionally finished look, are 100% non-toxic, and free of any allergens or latex, making them safe for the whole family.
Please note: There may be some surface imperfections and color variations. Also, our foam products can be punctured by sharp animal nails, rough use, high heels, and moving furniture..
Material: Closed cell EVA foam rubber
Size: 2' x 2'.
Thickness: ~13 mm.
Weight: Tiles weigh approximately 1.25 lbs. each.
Spec Sheet: Printable Spec Sheet.
Recommended Uses: Our 5/8" Premium Soft Foam Tiles have been used successfully in home exercise or fitness rooms, as Pilates and yoga mats, as tradeshow flooring, as kid’s play room flooring, bedroom flooring, daycare and early education flooring, and any other area where a cushioned or anti-fatigue flooring system would be useful.
Installing 5/8" Premium Soft Foam Tiles is very simple and usually done by the consumer. Typical installation of these interlocking foam floor tiles is as follows:
- First, clean your subfloor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Please note: When piecing interlocking tiles together, adhesives aren’t usually needed since the weight of the product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, you can use some double-sided tape or mat tape around the perimeter of the installation to prevent any movement.