Description - Providing you with our thickest and most durable Impact roll, our 15mm Impact Rolls – Designer Series are the perfect floor for both commercial and residential spaces. Featuring a 1/2” rubber underlay, these slip-resistant rubber rolls will provide you with a flooring surface that is not only durable but one that is very shock and sound absorbent. Easy to install and maintain, these rubber rolls are resistant to mold/mildew growth and are backed by an industry-leading 5-year warranty. Providing added warmth to any room, these rolls are great for upstairs gyms, playrooms, and much more.
Note: Our 15mm Impact Rolls - Designer Series are made in batches, which can lead to color variations when placing multiple orders. Due to this, we recommend ordering more flooring than is needed for mistakes, replacements, and future expansion to keep your floor looking beautiful and consistent.
Material – Recycled rubber and colored EPDM virgin rubber flecks.
Width – Each roll is 4' wide.
Length – The rolls are custom cut to your desired lengths free of charge provided that each roll length is 25’ long or longer and in whole foot increments such as 25’, 26’, 27’, etc. You will normally receive an extra few inches on each roll. This allows for a quick and easy installation.
Thickness – 15mm
Weight – 2.36 Lbs. per sqft.
Recommended Uses – Designed for commercial use, our 15mm Impact Rolls – Designer Series are ideal for residential applications as well. These rubber rolls are a great flooring option for CrossFit gyms, commercial gyms, home gyms, and upstairs gyms. It’s also perfect as flooring for high-impact workouts, as indoor track surfacing, as basement flooring, as flooring for upstairs playrooms, as garage gym flooring, as trade show flooring, and much more.
Available For Order - Ships between Nov 4 - 11
Designer Series Impact rolls are very easy to clean. Maintenance for these rubber rolls typically includes:
- Vacuuming any loose dust, dirt, or debris from the flooring surface when necessary.
- Occasional damp mopping of the rolls with a mild soap and water mixture. Some soaps commonly used include Dawn dish detergent and/or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.
For more detailed cleaning instructions and commercial cleaning instructions,
Click Here.
When installing rolled rubber flooring, it is recommended that you use an adhesive to prevent the rolls from moving around or sliding apart between adjacent rolls. The most common methods of adhering rubber rolls to the subfloor are:
A: Double-Sided Tape Installation
- First, clean your subfloor so that it is free of all dust, dirt, and debris.
- Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for 24-48 hours to ensure the proper installation of your new flooring.
- Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches.
- Make any necessary cuts to the rolls to fit them into the room using a straight edge and a utility knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
- Roll up the rolls at one end of the room. Apply double-sided tape to the floor along the perimeter of each roll.
- Place the rubber rolls back into position on top of the double-sided tape.
B: Glue Installation
- First, clean your subfloor so that it is free of all dirt, dust, and debris. Also, when gluing your flooring down, it is recommended that the subfloor is free of any moisture.
- Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for 24-48 hours to ensure the proper installation of your new flooring.
- Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches.
- Make any necessary cuts to the rolls to fit them into the room using a straight edge and a utility knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
- Roll up the rolls at one end of the room. Spread a light layer of polyurethane adhesive that is 10’ long (maximum) and unroll the flooring into the adhesive 10’ at a time.
- Repeat this step for every 10’ of roll length until the entire roll has been unrolled into its desired position.
- After all of the rolls have been glued down, it is often recommended to use a 100-pound roller on the floor to guarantee good adherence to the subfloor. If a roller is not available, walking on the flooring in small choppy steps may also work.
For printable installation instructions, please
Click Here.
