Description - Pre-cut tough rubber rolls are an excellent choice for the home user looking for a low-cost rolled rubber available in various colors. These rolls ships out of both the east and west coast to aid in keeping shipping costs low and are backed by a 5-year warranty. In addition, these rolls have added color fleck compared to most rolled rubber solutions for a more colorful appearance.
Material – Virgin-colored EPDM rubber fleck and recycled black rubber.
Width – 4'
Length – Available in 25' and 50' lengths. It is normal to receive extra inches on each roll as this allows for quick and easy installation.
Thickness – 1/4"
Weight – 1.6 Lbs. per sqft.
Recommended Uses – Pre-cut tough rubber rolls are designed for use in home gyms, as exercise and fitness flooring, basement flooring, and even in pet care facilities. You can place anywhere a non-slip rubber floor solution with anti-fatigue cushioning qualities might be beneficial.
Available For Order - Ships between May 23 - 30
Tough rolled rubber is easy to clean. Maintenance of these rubber rolls typically includes:
- Vacuuming or sweeping any loose dirt, crumbs, dust, or debris from the rubber floor surface when necessary.
- Occasional damp mopping of the rolls with a mild soap and water solution. A few recommended soaps are Dawn dish detergent or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pine-Sol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc., since these types of cleaners will break down the flooring over time.
For more detailed cleaning instructions and commercial cleaning instructions,
Click Here.
When installing rolled rubber flooring, it is recommended that you use an adhesive to prevent the rolls from moving around or sliding apart between adjacent rolls. The most common methods of adhering rubber rolls to the subfloor are:
A: Double-Sided Tape Installation
- First, clean your subfloor so that it is free of all dust, dirt, and debris.
- Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for 24-48 hours to ensure the proper installation of your new flooring.
- Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches.
- Make any necessary cuts to the rolls to fit them into the room using a straight edge and a utility knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
- Roll up the rolls at one end of the room. Apply double-sided tape to the floor along the perimeter of each roll.
- Place the rubber rolls back into position on top of the double-sided tape.
B: Glue Installation
- First, clean your subfloor so that it is free of all dirt, dust, and debris. Also, when gluing your flooring down, it is recommended that the subfloor is free of any moisture.
- Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for 24-48 hours to ensure the proper installation of your new flooring.
- Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches.
- Make any necessary cuts to the rolls to fit them into the room using a straight edge and a utility knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
- Roll up the rolls at one end of the room. Spread a light layer of polyurethane adhesive that is 10’ long (maximum) and unroll the flooring into the adhesive 10’ at a time.
- Repeat this step for every 10’ of roll length until the entire roll has been unrolled into its desired position.
- After all of the rolls have been glued down, it is often recommended to use a 100-pound roller on the floor to guarantee good adherence to the subfloor. If a roller is not available, walking on the flooring in small choppy steps may also work.
For printable installation instructions, please
Click Here.
