Description - Available in three different animal print patterns, your imagination will run wild with our Funky Animal Print Tiles. Easy to install and maintain, these soft tiles are great for kid’s rooms, playrooms, and basements and can be easily turned into corner, border, or center tiles with the use of included detachable edge pieces. Our interlocking foam tiles are very safe being 100% allergen free and free of latex and can be used as both flooring or as wall covering. So feel free to mix and match patterns together to create fun and interesting designs that are sure to bring out the kid in everyone.
Note: Foam products can be punctured by sharp animal nails, rough use, high heels, and moving furniture.
Material – Closed cell EVA foam.
Size – 3' x 3'.
Thickness – 5/8" Nominal (~14mm)
Weight – Tiles weigh approximately 2.00 Lbs. each.
Recommended Uses – Funky Animal Print interlocking tiles are very soft and durable and have been installed in kid's bedrooms, kid's playrooms, as wall covering, in basements, in child care facilities, in children museums, in daycares, in churches, and much more.
In Stock - Ships between Dec 5 - 6
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.