Description - Premium Soft Tiles are an excellent choice for a light weight and portable tile solution. Available in several fun and bright colors, these foam tiles have been designed for areas where a soft flooring solution is desired. Water resistant, shock absorbent, and insulating makes these tiles the perfect flooring option for any playroom, day care, or bedroom. Each soft tile comes with two detachable edge pieces and are free of any allergens or latex making them safe for young and old alike.
Note: There may be some surface imperfections and color variation. Also, our Foam products can be punctured by sharp animal nails, rough use, high heels, and moving furniture.
Material – Closed cell EVA foam rubber
Size – 2' x 2' (Note: Tiles do overlap 1.125” where they lock together)
Thickness – ~13 mm
Weight – Tiles weigh approximately 1.25 Lbs. each.
Recommended Uses – Soft Tiles have been used successfully in home exercise or fitness rooms, as pilates and yoga mats, as kid’s play room flooring, and any other area where long periods of standing occur and/or a cushioned flooring system would be useful.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.