I’m building a mini golf hole in my backyard. I need one 15 x 20 ft roll of the putting green turf for the putting area. The start of the hole to the main putting green measures, at it’s widest 7 ft x 24 ft and runs on a curve to meet up with the lower putting green on the 20 ft side of the turf. My question is about grain direction. I will have to join the two together and I’m wondering if the grain direction will be different and if that matters when seaming the edges together? I can send a picture if necessary.

The best way to match grain direction between two turfs before you join them together would be by laying out a section of the turfs and looking at them from all four sides, just so you know which way to lay and also to ensure you're laying them both in the same direction. The direction in which the pile goes will be very apparent and after you are sure of the grain direction, you may seam the turfs together. For additional information on this, please feel free to call us directly.
loader
Loading...
loader
Loading...