TritonCORE Pro 7" Rigid Core Vinyl Planks

TritonCORE Pro 7" Rigid Core Vinyl Planks are a revolutionary luxury vinyl flooring, packed with the best features, including an ultra-durable waterproof core, stain resistance, scratch resistance, and DIY-friendly click-lock installation. This waterproof vinyl plank flooring is attractive, durable, and affordable. Featuring natural wood looks like Pine, Oak, and Hickory, these premium vinyl planks will transform any space thanks to their realistic patterns and fresh colors. Our resilient TritonCORE Pro 7" Rigid Core Vinyl Planks are a great choice of LVP for active homes with kids and pets, making them an ideal vinyl flooring for any space. TritonCORE Pro 7" Rigid Core Vinyl Planks are also great for high-traffic commercial spaces and can be used in offices, retail stores, and more.

Note: For the high-variation floors, we recommend that you loose lay it before installation to ensure the plank arrangement is appealing to the eye.

• Underlayment: 1mm cork attached
• Wear Layer: 20 mil (.5mm)
• Thickness: 5mm
• Installation: Float or direct glue, suitable for on, above, or below grade
• Edges: Micro-beveled
• Locking System: Valinge 2G interlock
• Radiant Heating: Approved
• Applications: Residential and commercial
• Style: Wood-look with 5-plank pattern repeat
• Phthalates: None
• Warranties: Limited lifetime for residential, 15 years limited for commercial

Installation for luxury vinyl plank flooring is simple, and is commonly done by our customers.

• Complete any necessary floor prep. Square the product in the room leaving a 2-5 mm expansion space against the wall. Start with the tongue side facing the wall.
• After the initial starter board, press the end seam of the second plank into the end seam of the first plank, and then lock them together by laying the plank down. Continue working left to right.
• Install the first plank in the second row by inserting the tongue into the groove of the plank in the first row. This is best done with a low angle of the plank. Insert the long side seam at a slight angle first.
• As the top surfaces meet, rotate the plank down into the locked position. Engage the end seam, using a rubber mallet if necessary. Planks may be cut with a utility knife using the “score and snap” technique.
• Continue installing planks removing any gaps using a tapping block and a scrap of flooring to cover the tapping block. Be careful not to damage In*Step tongue and groove. Protect all exposed edges of the In-Step by installing wall molding and/or transition strips.
• Make sure that no plank will be secured in any way to the subfloor.

Maintenance of vinyl plank flooring typically includes:

• Daily or weekly vacuuming or dust mopping of dirt, grit, dust etc. Use felt pads under chair and furniture legs to prevent scratching of the flooring surface.
• Place door mats at all entrances to prevent tracked in dirt, rocks, moisture, and other debris. Avoid using rubber backed mats as they can stain the flooring surface over time.
• When mopping, use a damp and never a wet mop. Clean up spills immediately to prevent damage to the floor.