Yes, we’re open! Orders are being shipped but some products may be delayed due to COVID-19. (Click here for more info.)
Save 25% off today - Reduced shipping rates on non free shipping products.
Complete Your Order
Contact Us
 
8am - 8pm EST Monday - Friday
10am - 7pm EST Saturday

Diamond Nitro Rolls

Starting At
$1.49 /sqft
$1.99
Your Savings
 
MSRP
$1.99
Save 25%
-$0.50
Shipping
Free
 
Available For Order - Ships between Jul 29 - Aug 5

Select a Color
Midnight BlackDiamond Nitro Rolls
Midnight Black Diamond Nitro Rolls Midnight Black
Stainless SteelDiamond Nitro Rolls
Stainless Steel Diamond Nitro Rolls Stainless Steel
Sahara SandDiamond Nitro Rolls
Sahara Sand Diamond Nitro Rolls Sahara Sand
RedDiamond Nitro Rolls
Red Diamond Nitro Rolls Red
OrangeDiamond Nitro Rolls
Orange Diamond Nitro Rolls Orange
BlueDiamond Nitro Rolls
Blue Diamond Nitro Rolls Blue
* Color has not been selected
Product Highlights
  • Ships factory direct in custom sized or pre-cut rolls.
  • Easy to install and maintain.
  • Made of premium grade ultra durable vinyl.

Accessories
Diamond Design Stair Tread
Diamond Design Stair Tread
42" x 12.25" w/ Square Nose (4230)
Provides a safe and reliable stair covering that is durable and non-slip
$80.99 ea.
$80.99 ea.
Swisstrax Parking Guide
Swisstrax Parking Guide
2-Pack
2-pack: Park perfectly every time with this parking guide
$49.99 ea.
$49.99 ea.
Duracove 2.5" x 3.2mm x 120' Rubber Wall Base
Duracove 2.5" x 3.2mm x 120' Rubber Wall Base
2.5" x 3.2mm x 120 ln ft - Straight (toeless)
Covers expansion gap between the floor and the wall
$198.99 ea.
$198.99 ea.
Duracove 4" x 3.2mm x 4' Rubber Wall Base
Duracove 4" x 3.2mm x 4' Rubber Wall Base
4" x 3.2mm x 4 ln ft - Coved (with toe)
Covers expansion gap between the floor and the wall
$11.10 ea.
$11.10 ea.
Duracove 4" x 3.2mm x 4' Rubber Wall Base
Duracove 4" x 3.2mm x 4' Rubber Wall Base
4" x 3.2mm x 4 ln ft - Straight (toeless)
Covers expansion gap between the floor and the wall
$11.10 ea.
$11.10 ea.
Duracove 6" x 3.2mm x 100' Rubber Wall Base
Duracove 6" x 3.2mm x 100' Rubber Wall Base
6" x 3.2mm x 100 ln ft - Straight (toeless)
Covers expansion gap between the floor and the wall
$267.99 ea.
$267.99 ea.
  • Ships factory direct in custom sized or pre-cut rolls.
  • Easy to install and maintain.
  • Made of premium grade ultra durable vinyl.
  • 7 year warranty - Longest garage flooring roll warranty on the market.
  • Custom cut rolls are Commercial Grade.
  • Slip resistant when wet.
Description - Diamond Nitro Rolls were designed from the ground up to provide the best value roll out garage floor covering on the market. Nitro rolls are available in stock and custom cut rolls in various colors and ship the same or next business day. Each roll is backed by the longest warranty ever offered for a vinyl garage floor product: 7 years.
Note: Due to the manufacturing process, patterns of two pieces of flooring may not match or align exactly along the seam when two mats are laid side by side.
Material – Each roll is constructed of 100% premium grade virgin polyvinyl.
Size – Diamond Nitro rolls are available in multiple pre-cut widths and lengths for your convenience. 5' wide rolls are available in 7.5', 12', and 17' lengths. 7.5' wide rolls are available in 17', 25', 40', 50', 100', and 140' lengths. 8' wide, 9' wide and 10' wide rolls are available in 25', 40', 50', 100', and 140' lengths. Custom cut rolls are cut to your desired length free of charge in whole foot increments such as 10', 11', 12', etc. Max length per roll is 140 linear feet.
Thickness – Commercial grade base thickness is 2mm and the total thickness is 2.5mm. (0.0975"). Standard grade base thickness is 1.1mm and the total thickness is 1.6mm (.064").
Weight – ~0.77 Lbs / square foot for commercial grade and ~.51 Lbs / square foot for standard grade.
Recommended Uses – Nitro rolls have been used as roll out garage floor mats, as a wall to wall garage flooring, as workshop flooring, in storage sheds, as industrial anti slip flooring, and more.

Available For Order - Ships between Jul 29 - Aug 5

Nitro garage floor rolls are easy to clean and maintain. Cleaning of this roll out flooring / matting typically includes:
  • Sweeping, blowing off, or vacuuming any loose crumbs, dust, or debris from the tiles when necessary.
  • For more difficult or liquid stains, the product can be cleaned inside or outside the garage using a mild soap and water solution and a broom or vinyl brush to scrub the floor surface.
Note: This is not a stain proof product. Leaving certain harsh chemicals on the rolls for an extended period of time may cause some staining and/or damage. Street tar can cause staining to light colored rolls and in most instances this staining can be remedied with a cleaner called Purple Power. If you have performance tires, staining can occur with light colored rolls. In most instances this may not be remedied with a cleaner. If the staining on your floor does not dissipate, please contact our dedicated Customer Service team at 800-613-0996 who can further assist you.

Installation of our Garage Rolls is very simple and commonly done by the consumer. Typical installation of rolled garage flooring consists of:
  • First, clean your floor. Make sure your garage floor is clean, dry and free of debris. Sweep dirt out of your garage and remove any lumps or excess cement/debris that might cause a bump on the surface.
  • Next, unroll your flooring. Position your flooring at the front of your garage, one roll at a time. Roll the flooring out front-to-back and position carefully. Use a push broom to push out any air underneath the roll.
  • When installing multiple rolls wall-to-wall, you can make one of two joints: and overlap joint or a butt joint.
  • For overlap joints, one roll will be placed over another about 1-1/2 inches - 6 inches to create a virtually seamless floor.
  • For butt joints, you will want to fold back the edge of roll #1 and wipe clean. Attach double-sided tape along the roll #1’s edge leaving 2” of tape exposed and fold the roll back into position. Next you will want to fold back roll #2 and wipe the bottom edge clean. Carefully align along the edge of roll #1, making sure not to stretch the mat or tape when applying.
  • When cutting material for wall-to-wall installations, make sure to trim edges around exterior walls, poles boards, etc. with a sharp utility knife while leaving a 1/4” gap to allow for expansion and contraction of your floor.
  • After the product has been allowed to relax in place, hold down the edges or seam between two floor protectors with our double-sided tape or our recommended adhesive for perimeter or full spread adhered floors.
update text
update text update text update text update text
update text
Don't see what you're looking for? 
I just order a diamond sample in black. I have a 2 car garage and want to put in down on the side my Harley sits on. Do I need an adhesive to make sure it stays in place?
zakiya edwards
For our Diamond Nitro Rolls adhesive is never required, but may be used if there is movement with the mat. You can also try double sided carpet tape to hold the mat down if there is movement as well.
Will a mechanic's creeper roll easily on this material?
Anonymous
A mechanic's creeper will roll easily over our Diamond Nitro Rolls.
I live in Arizona where the temperature in the summer can easily get to 115 - which means that the tires get very hot. What is the effect of hot tires on the various garage floor products that you offer?
Anonymous
Hot tires will not affect our garage flooring products.
My concrete garage floor sweats. Will this work?
Anonymous
Since our Diamond Nitro Rolls are a non porous product, we would recommend sealing your concrete floor before placing our product over it. This will help to prevent the growth of mold and mildew under the flooring.
Can you use the standard grade nitro rolls on a garage wall? I am using the commercial grade on the floor, if so what adhesive?
Debby
Our Nitro rolls can be used on garage walls. The type of adhesive that you would use to apply them to the wall is a pressure sensitive adhesive. Our 5000 series adhesive is great for this application.

results 1-5 of 121

Average Rating
4.8/5.0

  GREAT STUFF
Self-installed in crab boat
Anonymous from PortCharlotte FL wrote...
I USE THIS IN MY COMMERCIAL CRAB BOAT. IT KEEPS THINGS FROM SLIDING, IT IS EASY TO CUT TO FIT,LITE ENOUGH TO PICK UP RINSES OFF EASY ALL GOOD !! THIS IS THE THIRD TIME I BOUGHT IT,IT REALLY STANDS UP TO SOME ABUSE,
  Love My New Floor!
Installed in Garage
Anonymous from Murphysboro, IL wrote...
Just wanted to let you know that I love my new flooring. I installed it on my garage floor, which is extremely slick when wet. In 2007, I fell and broke my hip on that floor. I almost fell again a few weeks ago and decided that I had to do something about that floor. The flooring was easy to install, but I do have one suggestion. I recommend purchasing professional strength duct tape and sealing all the raw edges and butt joints. This will prevent dirt from getting in between the joints and also prevent excessive wear on the front edge where the car tires go across. Bought the silver floor and the silver duct tape looks really good on it. Thanks for a great product.
Customer review image of  in pass-thru in my new RV trailer
Customer review image of  in pass-thru in my new RV trailer
Larger Image
  Very happy
Installed in pass-thru in my new RV trailer
David G. from Louisville, KY wrote...
I used the flooring in the pass-thru in my new RV trailer. It protects the cheap original RV flooring from scratches, stains and water spills, and I think it looks awesome! Very happy with your pricing, product, and service! Fast shipping and exactly as advertised! Thank you!
green checkmark Your item was added to the cart

Color:
Qty:

$0.00
$0.00