Berber Carpet Tiles

Our versatile Berber Carpet Tiles are convenient and low cost flooring option that features a self-adhering backing giving you an easy, less mess install. These DIY-friendly peel-and-stick floor tiles are perfect for trade shows, basements, indoor patios, playrooms, rentals, and anywhere a cost effective, soft flooring option is desired. These affordable capet tiles come in various colors with a Berber style pattern and come 20 tiles per box. These modular carpet tile squares are made of high quality materials and backed by a 3 year warranty. If you are looking for a floor that can be easily cleaned, maintained and replaced at an accessible pricepoint, our Berber Carpet tile is the product for you.

Recommended Installation Pattern - 1/4 Turn.

Material - 100% Polyester

Size - 12" x 12"

Thickness - 0.25"

Weight - 0.3 Lbs. per tile.

Traffic Type - Low/Medium - (This Traffic type works well for the home but is not suitable for commercial spaces)

Recommended Uses - Berber carpet tiles have been used successfully in many areas and some examples of them are: trade shows, basements, playrooms, bedrooms, living rooms, family rooms, indoor patios, enclosed decks, dens, including many other areas.

Thoroughly clean subfloor. It must be clean, dry, smooth and dust free. Find the center point between the two longest wall, mark near each end of the room. Connect center points with the chalkline. Using carpenter's square, draw a perpendicular line crossing the first line at the center point. Extend the perpendicular line to the walls by striking a chalkline. In one swift motion, remove protective backing and place first tile in the junction of the two lines at the center of the room. Lay tiles with ribs 90 degrees to each other working from the center of the room out. Continue installation to the walls until you are unable to lay a full tile. Next lay a full tile upside down, with the pattern in the proper direction, and overlap the last tile installed near the wall. Mark a straight line on the bottom of the tile where the tiles overlap. Cut the bottom of the tile along the line. After cutting, lay the tile with cut edge to the wall.

Spills should be removed immediately with an absorbent cotton cloth and clean water. For tough stains, you can remove any floor carpet tile to replace it with a leftover tile from installation. If you choose to vacuum your economy tiles, we recommend using a vacuum without a beater bar as to not damage the fibers.

3-Year Warranty.