Questions & Answers — Pro-Level Artificial Putting Green Turf Rolls - Golf Turf
Back to Pro-Level Artificial Putting Green Turf Rolls - Golf Turf
Viewing 1–20 of 30 questions
What does this measure on the stimp meter? And is there any way to speed up the greens if they are too slow, such as adding sand?
The stimp rating for our Premium Putting Green Turf is 7 without fill and 10.5 depending on the quantity and type of infill used. Using our infill will help to speed up the greens.
Was this helpful?Do you have a specific size of decomposed granite that you recommend for the base material? For instance, would you recommend decomposed granite sand or 3/8 inch minus?
We recommend using decomposed granite that is a mixture of granite and sand under all of our turf rolls in outdoor installations including our Premium Putting Green Turf Rolls.
Was this helpful?do you have anybody in Bay area, Northern California
We can connect you with installers in your area, please call us directly.
Was this helpful?Do you have to use infill with this turf?
You don't have to use infill with our Premium Putting Green Turf Rolls. To get the proper roll of your ball, you will want to add infill to your turf. The more infill you add to your turf, the faster the ball will roll giving you a higher stimp reading. To get as realistic of a putting surface as you can get, adding infill will be needed to achieve a realistic roll.
Was this helpful?Is this product pet friendly?
Yes, this turf is pet friendly.
Was this helpful?Can you use this type of putting green just for indoor use?
You can use our Premium Putting Green Turf Rolls both indoors and out.
Was this helpful?Are both the 7.5' and the 15' wide roll shipped rolled or are either folded?
Both the 7.5' and the 15' wide Putting Green Turf Rolls will ship rolled up.
Was this helpful?What is the width?
Our Putting Green Turf Rolls can be ordered either 7.5' wide or 15' wide. The length is custom cut based on your desired length.
Was this helpful?If installing on a wood floor indoors, what would the stimp be?
You can use our Putting Green Turf Rolls both indoors and out. The stimp rating is 7 without infill and 10.5 depending on the quantity and type of infill used. Using our infill will help to speed up the greens.
Was this helpful?What type of adhesive do you recommend for an indoor installation over concrete?
We recommend using a pressure-sensitive adhesive or a double-sided tape.
Was this helpful?Which of your other artificial turf options would you recommend for the fringe around the green?
You may use any of our landscape turfs for this purpose.
Was this helpful?Is this Putting Green Turf your best turf to allow easy cleaning of tiny leaves & berries from a Brazilian pepper tree? Or would they still be difficult to blow off, and I should consider your jamboree tiles? Thank you
These turf rolls mimic real turf, and the leaves will have to be either raked or blown off, as you would do with real turf. If you were to use the jamboree playground tiles, the debris could be easily brushed off, like how you would clean your floors at home.
Was this helpful?If I wanted to make an indoor putting mat that could be rolled for storage purposes, would this be suitable?
Yes, absolutely!
Was this helpful?I want to purchase a 20 x 15 Ft. Piece of putting green for my rooftop. I am a US citizen but I just moved to SIngapore. Is there any chance you would ship it here for me and what would the cost be?
We only ship in the USA. We could ship to a US-based address but you will have to arrange for a freight forwarder who can ship it to Singapore for you.
Was this helpful?Can your product tolerate being applied to a concrete outdoor surface where it will be exposed to freezing temperatures. Thank you
The Putting Green Turf Rolls are all-weather turf and will be fine during harsh winters.
Was this helpful?I’m building a mini golf hole in my backyard. I need one 15 x 20 ft roll of the putting green turf for the putting area. The start of the hole to the main putting green measures, at it’s widest 7 ft x 24 ft and runs on a curve to meet up with the lower putting green on the 20 ft side of the turf. My question is about grain direction. I will have to join the two together and I’m wondering if the grain direction will be different and if that matters when seaming the edges together? I can send a picture if necessary.
The best way to match grain direction between two turfs before you join them together would be by laying out a section of the turfs and looking at them from all four sides, just so you know which way to lay and also to ensure you're laying them both in the same direction. The direction in which the pile goes will be very apparent and after you are sure of the grain direction, you may seam the turfs together. For additional information on this, please feel free to call us directly.
Was this helpful?How do you do the putting holes when laying over concrete?
You may use a putting green hole cutter for this purpose.
Was this helpful?can I order pre shaped pads or do I need to cut it
Our Putting green turf rolls are custom cut according to your needs. We offer these rolls in two widths, 7.5' and 15'. You may choose the length of your choice.
Was this helpful?I have a 3000 sq foot putting green and would like to put the turf over it recommendations?
You may choose any of our putting greens for this purpose.
Was this helpful?I live in Southwestern PA and have a 10' x 60' Bocce' Court in my backyard. It is all natural material with a permeable fabric on the bottom, 6 inches of 2b stone with 4 inch perforated pipe drains in place, then tamped and rolled, with a 2 inch layer of 2a stone and dust, then 4 inches of natural clay pellets wetted and rolled. Because of the natural components and the clay top, it is a major maintenance problem with weed growth and spring time moss growth after a very wet spring. After 10 years of non-stop summertime maintenance, I am looking for a viable porous material to install on top of the existing clay surface that would not allow weed growth or be conducive to moss growth, and would be putting green height. Do you have a high durability product that would meet this goal ? If so, can I get it custom cut in one piece?
Using our weed fabric on your clay could help with the situation, but weeds will still grow towards the light and often come out of the sides on turf. We would highly suggest you spray the ground with some type of pre-emergent prior to laying the weed fabric down.
Was this helpful?