Questions & Answers — 1/2" Rubber Floor Ramps
Back to 1/2" Rubber Floor Ramps
Viewing 1–5 of 5 questions
I'm looking for a ramp transition that can curve at a 6' radius, from 1/2" or 5/8" to 0". Can this product curve into a semicircle?
Our 1/2" Rubber Floor Ramps are pliable and can be made to curve into a semicircle. To keep them in place, we recommend gluing them in place once in the desired shape.
Was this helpful?I want to transition from Shock Turf X to my floor without rubber tiles. Can I use this product?
You could use our 1/2" Rubber Floor Ramps with our Shock Turf X rolls. The height won't be the same, but you could butt the ramp up to the edge of the turf.
Was this helpful?Will the 1/2" rubber floor ramp work with the 15mm rubber floor rolls? If not, do you have a ramp that will work with it? Thanks.
Our 1/2" Rubber Floor Ramps are recommended to be used with flooring that is 1/2" thick. Our 15mm rubber flooring is a little thicker than this transition. If you were to use our 1/2" Rubber Floor Ramps with this thick of material, there would be a slight lip between the flooring the beginning of the ramp. Right now, we don't have a specific ramp that would work with our 15mm thick rubber flooring.
Was this helpful?How do you install this if one side of the door is rubber flooring and the other side is carpet? Does the rubber flooring go in the groove? How does the carpet stay on the other side?
When using our 1/2" Rubber Floor Ramps going down to carpet, you would put the rubber under the ramp, and the ramp tapered part would go over the carpet. If your rubber flooring and carpet are pretty much the same height, we recommend going with a T-Square trim. You can find proper trims on our Trims and Molding list page.
Was this helpful?What adhesive should be used with this product when installed on concrete?
For our 1/2" Rubber Floor Ramps, you can adhere them to concrete with double-sided tape or with a pressure sensitive adhesive.
Was this helpful?