Diamond Nitro Rolls

Transform your garage into the envy of the neighborhood with Diamond Nitro Rolls. Crafted from premium-grade, ultra-durable vinyl, these garage rolls are effortless to install and meticulously designed to elevate your garage's style. Whether you're working on your engine or simply relaxing, rolling out a Diamond Nitro Roll ensures a durable, low-maintenance floor solution. Choose from a range of colors to suit your taste, all backed by a Limited Lifetime Warranty—the longest ever offered for a vinyl garage roll.

Recommended Uses – Nitro Rolls have been used as roll-out garage mats, as wall-to-wall garage flooring solutions, as workshop flooring, in storage sheds, as industrial anti-slip flooring (dry applications), and more.

Note: Patterns of two rolls may not match up exactly when laid side by side. This product is not recommended for use over unsealed epoxy paint, gravel, asphalt, or subfloors with imperfections that may telegraph through vinyl sheets.

Installation Instructions for Diamond Nitro Rolls:

Preparation

1. Surface Cleaning:
   • Ensure the subfloor is clean, dry, and free of debris, grease, oil, and other contaminants.
2. Subfloor Suitability:
   • Do not install over unsealed epoxy paint, gravel, asphalt, or subfloors with imperfections that may telegraph through vinyl sheets.
3. Acclimatization:
   • Allow the Diamond Nitro Rolls to acclimate in the installation area for at least 24 hours at room temperature.

Installation

1. Planning Layout:
   • Unroll the Diamond Nitro Rolls and lay them out in the desired position.
   • Patterns of two rolls may not match up exactly when laid side by side, so plan accordingly.
2. Cutting to Fit:
   • Trim the rolls to fit your space using a utility knife and straight edge.
   • Leave a small gap (approximately 1/4 inch) around the edges to allow for expansion and contraction.
3. Securing the Rolls:
   • For smaller areas, the weight of the rolls may be sufficient to keep them in place.
   • For larger areas or high-traffic zones, use double-sided tape or adhesive around the perimeter and seams for extra stability.
   • Apply the adhesive according to the manufacturer’s instructions.
4. Seaming:
   • When joining two rolls, use a seam sealer to bond the edges together for a smooth, continuous surface.
   • Ensure the seams are tightly butted together and free of gaps.

Post-Installation

1. Rolling:
   • Use a floor roller to ensure the rolls adhere properly and to remove any air bubbles.
2. Initial Cleaning:
   • After installation, clean the floor with a mild soap and water solution to remove any installation debris.
3. Inspection:
   • Inspect the installation to ensure all edges are secure and seams are properly sealed.

Contact Information

• Customer Service:
  • For any issues or further assistance, please contact our dedicated Customer Service team at 800-613-0996.

Maintenance Instructions for Diamond Nitro Rolls:

Regular Cleaning

• Sweeping or Vacuuming:
  • Regularly sweep or vacuum the rolls to remove loose crumbs, dust, and debris.
• Mild Soap and Water Solution:
  • For more difficult or liquid stains, clean the floor using a mild soap and water solution.
  • Use a broom or vinyl brush to scrub the surface.

Stain Prevention and Removal

• Chemical Stains:
  • Note: This is not a stain-proof product.
  • Leaving certain harsh chemicals on the rolls for an extended time may cause some staining and/or damage.
• Street Tar and Light-Colored Rolls:
  • Street tar can stain light-colored rolls. Use Purple Power cleaner to remedy this.
• Performance Tires and Light-Colored Rolls:
  • Performance tires can cause staining on light-colored rolls, which may not be remedied with a cleaner.
  • If staining persists, contact our Customer Service team for assistance.

Installation Notes

• Pattern Matching:
  • Patterns of two rolls may not match up exactly when laid side by side.
• Subfloor Recommendations:
  • This product is not recommended for use over unsealed epoxy paint, gravel, asphalt, or subfloors with imperfections that may telegraph through vinyl sheets.

Contact Information

• Customer Service:
  • For any issues or further assistance, please contact our dedicated Customer Service team at 800-613-0996.