T-111 Polyurethane Adhesive

Description - Introducing the T-111 Two-Component Polyurethane Adhesive: The ultimate solution for interior installations of home, sport and commercial floor coverings. This high-performance adhesive is designed to deliver exceptional results even in the most demanding environments. With its impressive resistance to moisture, heat, and water, the T-111 adhesive ensures a reliable and long-lasting bond. T-111 adhesive is recommended for installation over asphalt. Size – 2-gallon pails Coverage – 30 sqft/gal - depending on the floor type. See the Installation Info tab for more details. Weight – 2-gallon pails weigh 26 Lbs. Color – Off White Recommended notched trowel : V-notch for waffle-back rubber flooring: 1/8" x 1/8" x 1/8" (3,2 x 3,2 x 3,2 mm) V-notch U-notch for smooth-backing rubber flooring: 1/16" x 1/16" x 1/16" (1,6 x 1,6 x 1,6 mm) Square notch

When Used as Adhesive Only

Floor Type	Trowel	Coverage
Multi-ply engineered plank 3/8" up to 1/2" and 5/16" to 3/8" solid strip	3/16" x 3/16" x 5/32" square notch	50 sqft/gallon spread rate
5/16" solid parquet, 1/4" engineered plank	1/8" x 1/8" x 1/8" square notch	80 sqft/gallon spread rate
3/4" solid wood planks/shorts, 4' x 4' plywood	1/4" x 1/4" x 1/4" square notch	30 sqft/gallon spread rate
Greater than 1/2" engineered plank, 3/4" parquet, and solid plank greater than 3/8" up to 9/16"	1/4" x 1/4" x 1/8" square notch	35 sqft/gallon spread rate
Bamboo up to 5/8" in thickness	3/16" x 3/16" x 3/16" square notch	35 sqft/gallon spread rate
Recycled Rubber Flooring over Non-Porous Substrates	3/32" x 3/32" x 3/32" square notch	100 sqft/gallon spread rate

When Used as 4-In-1 System

Floor Type	Trowel	Coverage
Multi-ply engineered plank and plain-backed parquet	1/4" x 3/16" V notch	30 sqft/gallon spread rate
Bamboo (Vertical & Horizontal Only) up to 5/8" in thickness	1/4" x 1/4" V notch	30-35 sqft/gallon spread rate
Solid Wood Planks and Bamboo (Vertical & Horizontal Only) greater than 5/8" in thickness	1/2" x 15/32" V notch	20 sqft/gallon spread rate

Maintenance Instructions:

1. General Maintenance:

   • Regularly check the integrity of the adhesive bond. Ensure there are no signs of moisture seepage or cracking.
   • Ensure that the flooring is installed and maintained as per the manufacturer’s guidelines to maintain the effectiveness of the adhesive.

2. Cleaning Wet Adhesive:

   • Use a wet cloth to clean up any adhesive while it is still wet. This will prevent it from hardening and becoming more difficult to remove.

3. Cleaning Dry Adhesive:

   • For dried adhesive, use a tennis ball to roll over the adhesive residue. The adhesive will adhere to the tennis ball and can be easily removed from the floor surface.

4. Inspection:

   • Periodically inspect the flooring for any signs of separation, bubbling, or unevenness that could indicate adhesive failure.
   • If any issues are detected, address them promptly to prevent further damage.

5. Environmental Conditions:

   • Maintain the appropriate environmental conditions as specified for the flooring material to ensure the adhesive remains effective.
   • Control humidity and temperature levels to avoid compromising the adhesive’s bond.

6. Storage and Handling:

   • Store the adhesive in a cool, dry place when not in use.
   • Ensure that the lid is tightly sealed to prevent contamination and drying out of the adhesive.

By following these maintenance details, the EZ Clean MS Polymer Adhesive will provide a long-lasting and effective bond for your wood flooring.