Questions & Answers — Polyurethane Adhesive
Viewing 21–29 of 29 questions
I have a basement that leaks water through the concrete. Will this product work without bubbling or peeling off?
Before you can use any of our adhesives, we would recommend sealing your concrete so that moisture does not interact with the glue. If moisture were to interact with the glue, it could weaken the bond between the glue and flooring over time.
Was this helpful?Does this product work with vinyl plank flooring and if so what is the recommended trowel size
We don't recommend using our Polyurethane adhesive with vinyl plank flooring. For this type of flooring, we recommend using our 5900 Series adhesive. Trowel size would be dependent on the substrate.
Was this helpful?Do I need to let the glue sit for a while first or can I lay the rubber on top right away?
With our Polyurethane Adhesive, you would install the floor over the glue while it is wet. This is a moisture curing adhesive meaning it will harden depending on how much moisture is in the room. This could be anywhere from an hour to 24 hours to do.
Was this helpful?Can your polyurethane adhesive be used to adhere sheet rubber flooring to walls?
Our Polyurethane Adhesive can be used to adhere our rubber flooring to a wall.
Was this helpful?The flooring is gypcrete in a condo. I was told that a cork floor would be glued to the gypcrete using a polyurethane and the engineered wood glued to the cork using a polymer glue, for sound etc. Does this make sense at all?
Our Polyurethane adhesive can be used to glue both the cork underlay and the wood flooring. No need to use a polymer glue.
Was this helpful?Can this adhesive be used to install your rolled rubber floor over and epoxy floor?
Polyurethane Adhesive can be used to install rubber flooring over epoxy flooring.
Was this helpful?Can we use Polyurethane Adhesive to adhere the rubber flooring on top of a thin carpet?
The subfloors that are approved to be used with our Polyurethane Adhesive are plywood, vinyl tile flooring coated with vinyl primer, underlayment grade O.S.B., A.P.A PS2-92 rated particleboard, concrete, light weight concretes, terrazzo and ceramic tile, and non-cushioned fully adhered sheet vinyl coated with vinyl primer.
Was this helpful?Will your polyurethane adhesive bond exterior 45mil EPDM pond liner to an 18" high concrete block perimeter wall?
You can use our Polyurethane Adhesive outdoors to bond EPDM to concrete.
Was this helpful?Can you apply the polyurethane adhesive when temperatures are below freezing?
Our Polyurethane Adhesive can be applied in below-freezing temperatures. Our Polyurethane Adhesive is more affected by humidity than temperature. The higher the humidity, the faster the glue will cure.
Was this helpful?