Indoor Basketball Court Tiles

Create the perfect multi-sport gym floor with our easy-to-install Indoor Basketball Court Tiles. Made of impact-resistant polypropylene, these durable interlocking floor tiles ensure colorfastness, durability, and chemical resistance. These impact absorbing, durable plastic tiles deliver high-performance as basketball court flooring, volleyball court flooring, and much more. More resilient and far less maintanance than traditional wood flooring, Indoor Basketball Court Tiles eliminate the need for costly gym floor covers, waxing, and refinishing. These easy-to-sanitize tiles are water-resistant, stain-resistant, and mold/mildew resistant. For added comfort under your new sports floor, we recommend using our rubber underlayment. This adds desirable bounce and spring to your court flooring, providing atheletes with ample shock absorption and enhanced protection from injuries. An impressive 7-year warranty backs our Indoor Court Tiles. Tiles are approximately 3/8" thick.

Recommended Uses: Our Indoor Court Tiles are a versatile sports flooring option as an indoor basketball court floor, volleyball court floor, badminton court floor, multi-sport flooring, and more. *Not recommended for pickleball or tennis.

Installation Instructions for Indoor Sports Tiles

Preparation

1. Surface Cleaning:
   • Ensure the subfloor is clean, dry, and free of debris, grease, oil, and other contaminants.
2. Subfloor Suitability:
   • Suitable for installation over concrete, wood, or any hard, flat surface.
3. Acclimatization:
   • Allow the Indoor Sports Tiles to acclimate in the installation area for at least 24 hours at room temperature.

Installation

1. Planning Layout:
   • Lay out the tiles in the desired pattern before snapping them together to ensure you are satisfied with the design.
   • If using multiple colors, plan your pattern ahead of time to avoid mistakes.
2. Underlayment (Optional):
   • If additional shock absorbency is desired, lay a rubber underlayment on the subfloor before installing the tiles.
3. Connecting Tiles:
   • Begin installation from one corner of the room and work your way out.
   • Align the tiles so that the tabs of one tile fit into the loops of the next tile.
   • Gently press down until you hear a click, indicating the tiles are locked together.
4. Cutting to Fit:
   • Trim the tiles to fit around edges and corners using a utility knife and straight edge.
   • Leave a small gap (approximately 1/4 inch) around the edges to allow for expansion and contraction.

Customization

1. Painting Lines:
   • After the tiles are installed, you can paint lines or other markings to create custom courts.
   • Use a suitable paint for polypropylene surfaces and allow it to dry completely before use.

Post-Installation

1. Inspection:
   • Inspect the installation to ensure all tiles are securely locked together and edges are properly trimmed.
2. Initial Cleaning:
   • Clean the floor with a mild soap and water solution to remove any installation debris.

Maintenance

• Regular Cleaning:
  • Sweep or vacuum regularly to remove loose dirt and debris.
  • Damp mop with a mild soap and water solution for deeper cleaning.
• Avoid Harsh Chemicals:
  • Do not use harsh chemicals that can damage the polypropylene surface.
• Check for Damage:
  • Periodically check for any loose or damaged tiles and replace them as needed.

Contact Information

• Customer Service:
  • For any issues or further assistance, please contact our dedicated Customer Service team.