Designer Grip-Loc Tiles - Plastic Shower Floor Tiles| Drain Tile

Anti-Bacterial and Anti-Fungal
Mold and Mildew Resistant
Odor Free and Stain Resistant
Made in the USA
10 year warranty

View All

Select An Option

More Information

Our Designer Grip-Loc tiles provide a durable and beautiful surface for areas where water is present. The tile's latticed design creates a unique and fun flooring surface for your bathroom, locker room, or laundry room. With this unique pattern, these tiles have also been used in indoor patios and sunrooms to create a dry and clean flooring surface. The tiles also create a slip-resistant surface that is comfortable to the touch and free draining. These tiles are capable of handling extremely wet and uneven surfaces and are resistant to bacteria, fungus, mold, and mildew among many other hazardous substances. Since these tiles are made from EVA, they are stain resistant, and odorless. Installation is as easy as snapping together adjacent tiles to form a beautiful and customizable flooring surface. Designer Grip-Loc tiles also come with an industry leading 10-year warranty.

Recommended Uses - Designer Grip-Loc tiles are truly built to be a multi-use durable floor tile. These tiles are most commonly used as locker room shower matting however they have also been used successfully as a flooring option in boats, in laundry rooms, kennels, and workstations. They also have been successfully used as shelf liners for bars and workshops.

Details

DrainageNo
Mold and Mildew-ResistantNo
UV StableNo

Grip-Loc Tiles are easy to install. Installation of these floor tiles typically includes: Clean your sub floor so that it is free of all dirt, dust, grease, or other foreign material. When installing the Grip-Loc tiles, we recommend starting in the front left corner of the room and working your way out from there. Make sure the female side (loops) of the tile is facing away from the wall. After filling the left wall with tiles and the adjacent wall, proceed to fill the rest of the room with whole tiles. When you come up to a wall or object, don’t worry. Just measure the area and cut the tiles with a sharp utility knife and put the trimmed tiles into place. When trimming the tiles into place, make sure you leave about a 3/4” space between the tiles and the wall or obstruction. Once the tiles are in place, you can then snap in the edge pieces, if you purchased them.

Vacuuming any loose dirt, dust, or debris from the tiles.

10-Year Warranty.

Reviews

Questions

Customer Questions And Answer

Our Designer Grip-Loc Tiles are made from EVA and are a very flexible plastic that will not puncture your roof. These tiles will work as flooring on a roof. Since these tiles are not UV stable, these tiles will fade in direct sunlight. Also, there may be some expansion and contraction with these tiles, so you will want to leave an expansion gap around the flooring surface. These tiles will allow water to flow freely through the flooring system making them slip resistant when wet and they are...

Our Designer Grip-Loc Tiles are a soft plastic flooring. These tiles are great a shower flooring because they are comfortable underfoot and slip resistant when wet. These tiles are very easy to install and clean and are mold and mildew resistant.

You can cut our Designer Grip-Loc Tiles easily with a sharp utility knife and a straight edge.

You can install our Designer Grip-Loc Tiles over crushed gravel under a hot tub. We typically recommend installing these tiles over concrete or asphalt, but any hard flat surface also works. If there is a major flooding event, these tiles may become unstable and may float away, but under normal conditions, these tiles will perform just fine.

Our Designer Grip-Loc Tiles can be used as flooring in a sauna. These tiles were meant to be used as flooring in areas where water will be present and are softer than our hard plastic tiles. They are still very durable but are meant to be comfortable under bare feet. These tiles will not melt due to the heat in the sauna as they are made from the same material as many household items and piping.

Our Designer Grip-Loc Tiles work the same whether the water is hard or soft. These tiles have feet that keep them in place.

Our Designer Grip-Loc Tiles can be used as a flooring surface on a boat. These tiles are vented, allowing water to pass through and under the flooring, surface keeping you dry. The tiles are interlocking and when interlocked are heavy enough to stay in place without any glue needed. If they did move for any reason, some double-sided tape or glue could be added under the tiles to keep them in place.

Our Designer Grip-Loc Tiles are made from a softer plastic compared to the Rugged Grip-Loc Tiles. Also, our Designer Grip-Loc Tiles are also not UV treated like the Rugged Grip-Loc tiles, which is why we don't recommend them for outdoor areas. The softer plastic used for those tiles also expands and contracts drastically, so we would not recommend using those tiles in a confined area outdoors. When it comes to working out on them, since the plastic is a little softer, you would get some shock absorbency that you wouldn't get from the Rugged Grip-Loc Tiles. To get more bounce and comfort from the Rugged Grip-Loc Tiles, we recommend adding our ShockPad under the tiles. Both would be able to support any weight put on them.

Our Designer Grip-Loc Tiles are slip-resistant. We don't recommend driving vehicle over them, but if you wanted to use them as a custom anti-fatigue mat, they definitely would work for that purpose. These tiles are stain-resistant and can be used in areas where oil changes would be done.

For a boat dock, if you're going for a wood-look, our Helios Deck Tiles will be a good option. If you're looking for something similar to the Designer Grip-Loc tiles, the top 3 products will be the Rugged Grip-loc Tiles, Vented Grip-Loc Tiles, and Smooth Rugged Grip-Loc Tiles. All these tiles are slip-resistant and won't fade.

Yes, you can use our Designer Grip-Loc Tiles on dog crates.

Yes, the Designer Grip-Loc Tiles can be used in a dog grooming tub. Please use our calculator on the product page to calculate the number of tiles you would need. Yes, you can cut these tiles using a sharp utility knife and a straight edge.

Our Designer Grip-Loc Tiles are not UV treated, which is why we don't recommend them for outdoor areas. Please see our UV stable Rugged Grip-Loc tiles that are great for outdoor use.

You may find edging pieces on the product page of our Designer Grip-Loc Tiles under "Accessories". You would need male & female edge pieces and male & female corner edge pieces for these tiles. If you look at the tile, you will see a side with loops that are called female pegs. You would use the male edge on this side. The side of the tile that does not have loops are called male pegs. You would use the female edges on this side. Please see our installation video here for more information https://...

Our Designer Grip-Loc Tiles are not UV stable and hence are not recommended for areas with full sun exposure. However, our rugged grip-loc tiles and ProFlow Drainage tiles would work perfectly on the top deck of your houseboat since they're UV stable. You may also choose any of our other outdoor tiles, please see them here https://www.rubberflooringinc.com/drainage-tiles.html#!filter=349

Yes, our Designer Grip-Loc Tiles can be used in dry saunas, in fact many of our customers use these for the same purpose! The melting point is 300 degrees F.

Yes, these tiles can be driven/parked on.

These tiles can be easily removed and cleaned and then put back again!

We recommend installing the toilet seat first and then placing the tiles around it. The tiles can be cut easily the fit the area as needed. Please call us directly for specific questions.