Description - 6mm Energy rubber tiles are designed to be a low-cost rubber tile that is durable enough for any home gym and can be used in light duty commercial gyms. These recycled rubber tiles are available in center cut tiles in one popular all purpose color. The locks on these tiles are precision cut for a nearly seamless appearance and these tiles can be loose laid for an easy installation (no adhesive is required). Energy tiles can be cut with a utility knife and straight edge for wall to wall installations or to make square rubber mats using the tiles and like all of our rubber products, they are backed by a 5 year warranty.
Note: Confetti will not interlock with Teal or Violet.
Material – Recycled SBR rubber and colored EPDM virgin rubber flecks.
Size – 24” x 24”.
Thickness – 6 mm thick (approx. 1/4")
Weight – Each Energy tile weighs approximately 5 Lbs.
Recommended Uses – Energy interlocking rubber tiles are an excellent floor tile for use as flooring for home gyms and workout rooms, as commercial gym flooring in light duty gyms, as dog kennel flooring, as baement and rec room flooring, and anywhere else a non slip and shock absorbing resilient floor surface would be useful.
Available For Order - Ships between Jan 31 - Feb 4
Energy tiles are extremely durable and easy to maintain. Maintenance of these interlocking tiles typically includes:
- Vacuuming any loose crumbs, dust, or debris from the flooring surface when necessary.
- Occasional damp mopping of the rubber tiles with a mild soap and water solution. A few recommended soaps are Dawn dish detergent or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.
For more detailed cleaning instructions and commercial cleaning instructions, Click Here.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Snap a chalk line on the sub floor 24” from one wall in your room. Snap another chalk line on the subfloor 24” from an adjacent wall. You should now have a pair of perpendicular lines making an approximate 90-degree angle.
- Begin laying the interlocking tiles along the chalk lines, snapping the locks together as you go.
- Leave the perimeter of the room open until the field is installed.
- After the field is covered, go back and cut in lines along the walls in the room. Leaving a gap at the wall roughly the thickness of tiles being used is recommended to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.
For printable installation instructions, please Click Here.