Description - If you are looking for a naturally weathered wood plank that is incredibly durable and easy to maintain, the Season Wood porcelain tile is the perfect solution for you. Offered in very large plank sizing to replicate real hardwood this collection also offers the extreme durability of a porcelain body. With a random color variation from plank to plank, this unique line adds a beautiful old world touch to any space. Season Wood is built with a Colorbody porcelain, meaning that the color of the pattern is continued through the tile, so any damage will not be as noticeable as compared to a ceramic tile.
Material – Body Match Porcelain tile with rectified edging for tighter grout joints.
Size – Available in 6" x 48" planks, 8" x 48" planks, 12" x 48" and 8" x 48" planks.
Thickness – 3/8" (9mm)
Shade Variation – Random (V4)
Minimum Grout Joint Recommendation – 1/8" (3/16" when laid in a staggered brick pattern)
Application – Floors, walls, countertops, and exterior patios.
Breaking Strength – >450 lbs.
Case Weight – Each 6x48 case weighs ~64 lbs, each 8x48 case weighs ~44 lbs, each 12x48 case weighs ~64 lbs, and each 24x48 case weighs ~85 lbs.
Origin – Made in Italy.
Recommended Uses – Season Wood planks have been successfully installed in a variety of applications, included dental offices, libraries, bedrooms, hotel lobbies, cafeterias, kitchens, basements, waiting rooms, retail shops and more.
Available For Order - Ships between Jun 3 - 5
Porcelain tiles are easy to keep clean and maintain. Maintenance of the floor typically includes:
General instructions for installing floor tile:
- Tile must be installed over structurally sound substrates. Any damaged, loose or uneven areas must be repaired, patched and leveled.
- Start by marking the center point of the room. Place a row of loose tiles along the center lines in both directions, leaving enough space for uniform joints (use tile spacers).
- Using the notched side of the recommended trowel, comb adhesive into standing ridges by holding trowel at a 45-degree angle. Remove excess adhesive, leaving a uniform, ridged setting bed. Never spread a larger area than can be set in 15 minutes.
- Measure tiles to be cut carefully and mark with a pencil or felt-tip pen. Make straight or diagonal cuts with a tile cutter and curved cuts with a nipper. Be sure to mix tiles from several cartons as you set, for a blended effect.
- Begin installation in the center of the room. Finish each grid before moving to the next. Start with the first tile in the corner of the grid and work outward. Set tiles one at a time using a slight twisting motion. Insert tile spacers as each tile is set. Fit perimeter tiles in each grid last, leaving 1/4" gap between tile and wall.
- When grid is completely installed, tap in all tiles with a rubber mallet or hammer and wood block, to ensure a good bond and level plane. Remove excess adhesive from joints with a putty knife, and from tile with a damp sponge.
- Do not walk on tiles until they are set (usually in 24 hours).
Tips for installing large format floor tile:
- Large size floor tile installation requires particular attention to proper subfloor preparation, grout joint sizing, trowel selection, and mortar coverage.
- It is absolutely critical that large tile be installed on a level substrate.
- Installation Requirement: For proper bonding, medium bed mortar should be used in installing tiles with a dimensional length greater than 15 inches on any one side of the tile. Back buttering tiles of this nature in the installation process will also assure proper coverage for body.
For detailed installation instructions, please Click Here.