Complete Your Order
Contact Us
8am - 8pm EST Monday - Friday
10am - 7pm EST Saturday

Daltile Exquisite

Every Day Low Price! Not eligible for promotions
This product has been discontinued.
Please see comparable products below.
  • Beautiful travertine look.
  • Random shade variation from tile to tile.
  • Residential or commercial applications.
  • Adds a modern touch to any room.
  • Durable and low cost alternative to natural stone.
  • Post & pre consumer recycled materials.
  • Features Reveal Imaging technology.
Description - With the beauty & timeless look of natural travertine flooring, Daltile's Exquisite series may resemble delicate stone, but it boasts the durability of a porcelain tile. The random shade variation has a beautiful effect across the whole room, for a truly non-uniform appearance. Porcelain tiled can be installed on any level and in any room of the home, unlike other flooring types.
Material – Porcelain tile with a Reveal Imaging technology.
Size – Available as 12" x 12", 12" x 24", 18" x 18", and 24" x 24" tiles.
Thickness – 18" x 18" and 12" x 12" tiles are 5/16" thick, while 24" x 24" and 12" x 24" tiles are 3/8" thick.
Shade Variation – Random (V4)
Minimum Grout Joint Recommendation – 3/16"
Application – Floors, walls, countertops.
Breaking Strength – >275 lbs.
Case Weight – Each 12x12 case weighs ~53 lbs, each 18x18 case weighs ~63 lbs, each 12x24 case weighs ~56 lbs, and each 24x24 case weighs ~58 lbs.
Origin – Made in the USA.
Recommended Uses – Exquisite porcelain tiles are recommended for installation in bedrooms, boutiques, bathrooms, kitchen areas, waiting rooms, restaurants, breakrooms, and more.

Out of Stock - Pre-Order Now

Porcelain tiles are easy to keep clean and maintain. Maintenance of the floor typically includes:
  • Daily or weekly vacuuming or mopping of dirt, grit, dust etc.
  • Place door mats at all entrances to prevent tracked in dirt, rocks, moisture, and other debris.
  • Glazed tiles should be cleaned routinely with an all-purpose, low VOC household or commercial cleaner.
  • The entire area should be cleaned and scrubbed with cleaner solution by using a cotton mop, cloth, sponge, or non-metallic brush.
  • Routine cleaners should never contain hazardous or polluting products including, but not limited to acids or ammonia. Acids can damage the grout and the glazed surface of the tile, while ammonia can cause discoloration of grout.
  • When complete, be sure to rinse the entire area with clean water to remove all cleaning solution residue.
  • For detailed cleaning instructions, please Click Here.
General instructions for installing floor tile:
  • Tile must be installed over structurally sound substrates. Any damaged, loose or uneven areas must be repaired, patched and leveled.
  • Start by marking the center point of the room. Place a row of loose tiles along the center lines in both directions, leaving enough space for uniform joints (use tile spacers).
  • Using the notched side of the recommended trowel, comb adhesive into standing ridges by holding trowel at a 45-degree angle. Remove excess adhesive, leaving a uniform, ridged setting bed. Never spread a larger area than can be set in 15 minutes.
  • Measure tiles to be cut carefully and mark with a pencil or felt-tip pen. Make straight or diagonal cuts with a tile cutter and curved cuts with a nipper. Be sure to mix tiles from several cartons as you set, for a blended effect.
  • Begin installation in the center of the room. Finish each grid before moving to the next. Start with the first tile in the corner of the grid and work outward. Set tiles one at a time using a slight twisting motion. Insert tile spacers as each tile is set. Fit perimeter tiles in each grid last, leaving 1/4" gap between tile and wall.
  • When grid is completely installed, tap in all tiles with a rubber mallet or hammer and wood block, to ensure a good bond and level plane. Remove excess adhesive from joints with a putty knife, and from tile with a damp sponge.
  • Do not walk on tiles until they are set (usually in 24 hours).

Tips for installing large format floor tile:

  • Large size floor tile installation requires particular attention to proper subfloor preparation, grout joint sizing, trowel selection, and mortar coverage.
  • It is absolutely critical that large tile be installed on a level substrate.
  • Installation Requirement: For proper bonding, medium bed mortar should be used in installing tiles with a dimensional length greater than 15 inches on any one side of the tile. Back buttering tiles of this nature in the installation process will also assure proper coverage for body.
For detailed installation instructions, please Click Here.
For printable warranty information, please Click Here.
Don't see what you're looking for? 
No results found.
prev page 1 ... ... next page
prev page PREV
prev page PREV
NEXT next page
NEXT next page
Be the first to add a review Write a Review
All Review Images icon View all customer images
Your item was added to the cart
$0.00 total