Complete Your Order
Contact Us
8am - 8pm EST Monday - Friday
10am - 7pm EST Saturday

12mm Mega Clic Vintage White Oak Laminate Flooring

Our Sale Price
$3.15 25% off
Covers 20.40 sqft
  • White Oak wood look.
  • Attractive, light colors.
  • 35 year warranty.
In Stock - Ships between Nov 18 - 20
Select a Color
Greystone12mm Mega Clic Vintage White Oak Laminate Flooring
Greystone 12mm Mega Clic Vintage White Oak Laminate Flooring Greystone
Night Dream12mm Mega Clic Vintage White Oak Laminate Flooring
Night Dream 12mm Mega Clic Vintage White Oak Laminate Flooring Night Dream
Summer Beam12mm Mega Clic Vintage White Oak Laminate Flooring
Summer Beam 12mm Mega Clic Vintage White Oak Laminate Flooring Summer Beam
Coral Beach12mm Mega Clic Vintage White Oak Laminate Flooring
Coral Beach 12mm Mega Clic Vintage White Oak Laminate Flooring Coral Beach
White Sand12mm Mega Clic Vintage White Oak Laminate Flooring
White Sand 12mm Mega Clic Vintage White Oak Laminate Flooring White Sand
Black EVA Foam Underlayment
Black EVA Foam Underlayment
4' x 25'
4' x 25' roll
Quarter Round
Quarter Round
.75" x 96"
Covers expansion gap between the floor and the wall
$49.99 ea.
$49.99 ea.
2" x 96"
Joins two floors that are the same height
$62.99 ea.
$62.99 ea.
1-1/2" x 96"
Transitions a taller floor to a lower floor
$62.99 ea.
$62.99 ea.
Stair Nosing
Stair Nosing
2" x 96"
Absorbs impact & protects your stairs
$92.99 ea.
$92.99 ea.
End Cap
End Cap
1-1/2" x 96"
Transition hand surfaces to carpet, sliding doors, & more
$62.99 ea.
$62.99 ea.
  • White Oak wood look.
  • Attractive, light colors.
  • 35 year warranty.
  • Can be installed on any level of the home.
  • Easy, glue free installation.
  • 7.7" wide x 47.8" long.
Description - Vintage White Oak laminate planks perfectly capture the beauty and rich look of natural white oak flooring. With a range of color tones available, you are sure to find the perfect fit for your room's decor. Also, since Vintage is backed by a 35 year residential warranty, your planks are sure to hold up, ensuring you love these planks for years to come.
Material – Mega-Clic laminate flooring is composed of a laminate over top of an HDF core that is both water resistant and Carb 2 compliant. The laminate is protected with a wear layer and the HDF core helps provide added stability and durability.
Size – Laminate floor planks are 47.8" long x 7.7" wide.
Thickness – 12.3mm (~1/2")
Class Rating – AC3 (Designed for home use in all foot traffic areas and can meet some commercial standards).
Weight – Each laminate plank weighs ~4.3 lbs.
Recommended Uses – Vintage White Oak laminate planks have been successfully installed in basements, bedrooms, offices, waiting areas, computer rooms, dining areas, living rooms, and more.

In Stock - Ships between Nov 18 - 20

Laminate planks are easy to keep clean and maintain. Maintenance of the floor typically includes the following:
  • Use a damp cloth to blot up spills as soon as they happen. Never allow liquids to stand on your floor.
  • For tough spots, such as oil, paint, markers, lipstick, ink, or tar, use acetone/nail polish remover on a clean white cloth, then wipe the area with a damp cloth to remove any remaining residue.
  • Sweep, dust, or vacuum the floor regularly with the hard floor attachment to prevent accumulation of dirt and grit that can scratch or dull the floor finish.
  • Periodically clean the floor with cleaning products made specifically for laminate floor care.
  • Do not wash or wet mop the floor with soap, water, oil-soap detergent, or any other liquid cleaning material. This could cause swelling, warping, delamination, and joint-line seperation, and void the warranty.
  • Do not use steel wool, abrasive cleaners, or strong ammoniated or chlorinated type cleaners.
  • Do not use any type of buffing or polishing machine.
  • For spots such as candle wax or chewing gum, harden the spot with ice and then gently scrape with a plastic scraper, such as a credit card. Be careful not to scratch the flooring surface. Wipe clean with a damp cloth.
  • Use felt pads under chair and furniture legs to prevent scratching of the floor surface.
  • Place door mats at all entrances to prevent tracked in dirt, rocks, moisture, and other debris.
General Information:
The flooring is installed as a “floating flooring”. This means that the flooring should not be fixed to the subfloor and there should be 4-6 mm distance to wall and other fixed objects. Remove any flooring strips. Measure the room accurately at a right angle to the direction of the floorboards. The floorboards in the final row should be at least 5 cm wide. If necessary, the floorboards in the first row can be cut to smaller size. Tools needed to install the flooring are a pad saw or fine toothed handsaw and an installation kit containing spacer block and an installation tool. You also need an underlayment (cork, foam or rubber) and in certain cases 0.2 (.008 in) mm plastic film for insulation against moisture.
Flooring Prep:
Store the floorboards at room temperature for at least 48 hours still in their packaging, prior to commencing work. The room temperature must be at least 18°C (65°F) before and during installation. Floor areas more than 100 m² (900 sq. ft.) with dimensions greater than 10 m (30 feet) in either length or with, in transitions between two rooms and asymmetrical floor areas requires expansion gaps in the floor installation.
Subfloor Prep:
The flooring can be laid on top of most hard surfaces such as resilient floor coverings, wood flooring and ceramic tile. Soft subfloors such as carpets and similar must be removed. The subfloor must be even, flat, dry and variations should not exceed +/- 2 mm in 2 m (.08 in 6.6'). On wooden floors the flooring is normally laid across the existing floorboard.
All type of concrete, wooden and ceramic surfaces must be completely dry:
  • For wood surfaces, moisture rate corresponding to 50% RAH
  • For concrete screeds CM < 2.0%/
  • For anhydride screeds CM < 0.5%

All types of concrete and ceramic subfloors require insulation against damp. This is also required for concrete floors with built-in-moisture barrier or heating and concrete floors with resilient floor covering. Use moisture barrier film with a minimum thickness of 0,2mm (.008) and allow for at least 20cm (8”) overlapping before taping. Turn the film upwards along the walls and trim when the laying of the floor is completed. Underlayment must be used over the entire installation when installing. Use underlayment paper or foam with a thickness of 3mm (.12 in).
Heated Floor Prep:
Follow the instructions for the subfloor heating systems supplied by the manufacturer/contractor. Also note the following: Turn the subfloor heating off for 2 – 3 days so that the floor is room temperature prior to laying. The surface temperature of the floor must not exceed 28°C (82°F) and the maximum output from the heating cables must not exceed 60 W/m². Make sure that the floor surface has no hot and cold areas, as this will cause tension in the floor when the heating cables are in use. Turn on the heating system after laying is completed. We recommend following start up procedure: During the first week, the heating should be set to low or medium for 2 hours per day. During the next week, set the heating to medium output, 24 hours per day. After the initial period, the heating can be regulated in a normal way. Note: That when using carpets, the surface temperature of the flooring might be higher than recommended.
  • Begin laying the flooring in the left-hand corner. Place the floorboard 4-6mm from the left wall. The distance to the wall in front (4-6mm) is not important because the flooring can be pushed into place at a later stage.
  • Press the end section of the next floorboard at an angle to the first one, then lay down. Complete the first row in the same manner.
  • Place the final floorboard face down and the short side without the locking strip towards the wall. The distance to the wall should be 4-6mm. Mark where the floorboard is to be cut.
  • Place the floorboard face down on the work surface and cut to size using a pad under 1 saw. Use a fine toothed type if you are using a hand saw. In this case, cut the floorboards face up.
  • Use a cut piece of floorboard from the previous row to start the next row. This must be at least 30 cm long. If the piece is too short, start with a new board and cut in half. Always ensure that the end joints are staggered at least 30 cm.
  • Place the floorboard at an angle against the floorboard in the previous row, press forward and fold down at the same time.
  • Place the next floorboard at an angle against the previous installed floorboard and push it against the row in front. Put it down when the floorboards are positioned tightly.
  • The distance to the walls can be adjusted when the three rows are completed. Place the flooring 4-6mm from the walls.
To view printable detailed installation instructions, please Click Here.
For printable warranty information, please Click Here.
Don't see what you're looking for? 
Average Rating

Customer review image of  in Entire house except baths
  Best Wire Brushed Laminate-Modern & Very high
Self-installed in Entire house except baths
Candice from Elmhurst IL wrote...
I'm an interior designer in Elmhurst and we flip homes as well. There area a lot of factors that go into my choices of wood or wood like flooring. I had been looking for a laminate that was really low priced but very authentic yet somewhat modern. Because you would never get your money back on a small cape cod with real wood floors which to me these days -is overly marked up. And with real wood you don't get these special more sophisticated finishes unless you pay a fortune. I wanted the wide plank look with a micro chamfer and could not afford this same look in wood-and this is key. This floor-I can tell you is so gorgeous in person. And where the knots are , catches this sheer gray wash which is extremely subtle but noted. The floors also have dents, and real imprinted characteristics that others brands did not have. I canvassed many others for for 4.00 a square foot which did not. The flooring was 30% at the time and so I believe I got it for about 1.31 a square foot. The shipping was shocking but I had done a ton of research and shopping and thought this was the best I'd seen out there. I was more impressed with the flooring in person and so relieved when I saw it down. Even my neighbor came by and could not believe it was laminate. It doesn't look like laminate, doesn't sound like it . However I paid a lot more by getting the 4mm felt under it which is KEY and keeps your house more quiet and peaceful sounding. And of course putting it over stiff quality new plywood instead of over planks is also key. We like the floor so much that we plan to put in on the stair treads. The only thing I regretted about the order is the cost of shipping which was not avoidable. I hope #MegaClic doesn't get rid of this line-the vintage white oak b/c its their nicest work yet. I attached a close up pic of it with the felt underneath so ppl can see what it really looks like close up.
Craig from FL wrote...
Really pretty white wash colors and price wasn't too bad. Great for beach vibes
green checkmark Your item was added to the cart