Description - Performance Floor is a durable all-purpose floor great for high traffic areas such as studios, multi-purpose rooms, and showrooms. Easy to install and maintain, this floor can be used as a temporary floor or as permanent flooring. Not only is this floor durable enough for high traffic areas, it is also an excellent flooring surface for all types of dance.
Material – Constructed with a co-calendared homogeneous PVC wear layer with a felt backing.
Size – 6' x 60'
Thickness – ~2.5mm
Installation - Permanent
Floor Speed - Medium-Slow
Shoe Style – All shoe styles, hard or soft
Use With – Latex Dance Floor Adhesive, Heavy Duty Cleaner, All Purpose Cleaner
Recommended Uses – Performance Floor is great for high traffic areas and as a dance floor. Types of dances that are suitable on this floor are Tap, Flamenco, Pointe, Irish, Drill Team, Ballroom, Modern, Jazz, Lyrical, Irish, Ballet and more.
Available For Order - Ships between May 24 - 31
Vinyl rolls are easy to clean and maintain. Cleaning of this flooring typically includes:
- Sweeping or vacuuming any loose crumbs, dust, or debris from the floor when necessary.
- Light damp mopping to remove light staining or spills. Remove scuffs and excessive soil by carefully scrubbing.
- Avoid prolonged exposure to direct sunlight, as discoloration may occur. We recommend closing blinds or drapes during peak sunlight hours to prolong the life of the floor.
Note: This is not a stain proof product. Leaving certain harsh chemicals or spills on the floor for an extended period of time may cause some staining and/or damage. Always clean up a spill immediately to reduce the chance of staining or other damage to your flooring.
When installing rolled vinyl dance flooring, it is recommended that you use some kind of adhesive to prevent the rolls from moving around or sliding apart between adjacent rolls. The most common methods of adhering Marley dance floors to the sub floor are:
For Permanent Installation Only:
- First clean your sub floor so that it is free of all dirt, dust, and debris. Also, when gluing your flooring down, it is recommended that the subfloor is free of any moisture.
- Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for up to 24-48 hours to ensure proper installation of your new flooring.
- Make any necessary cuts to the rolls to fit them into the room using a Straight Edge and a Utility Knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
- Roll up the rolls at one end of the room. Put down a 10 foot long light layer of adhesive and unroll 10 of the flooring into the adhesive at a time.
- Repeat this step for every 10 feet of roll length until the entire roll has been unrolled into it desired position.
- After all rolls have been glued down, it is often recommended to use a 100-pound roller on the floor to guarantee good adherence to the sub floor. If a roller is not available, walking on the flooring in small choppy steps may also work.