Highest Rated + Most Reviewed
Over 500,000 customers and 40,000 product reviews

Complete Your Order
Contact Us
8am - 8pm EST Monday - Friday
10am - 7pm EST Saturday

Eco-Impact Roll - Wood Series

Our Price
$5.49 sqft
$1,592.10 roll
reg: $7.32 sqft
roll: $2,122.80
Ships between Aug 24 - 31
Selected Color: 
roll over image to magnify
MapleEco-Impact Roll - Wood Series
Maple Eco-Impact Roll - Wood Series Maple
OakEco-Impact Roll - Wood Series
Oak Eco-Impact Roll - Wood Series Oak

5'11" x 49'2" x 6.5mm thick
Accessories for Eco-Impact Roll - Wood Series
Rubber Floor Ramps
Rubber Floor Ramps
3" x 12 linear ft
Transitions a taller floor to a lower floor
$37.99 $50.65
Weight: 4.40lbs
Duracove Rubber Wall Base
Duracove Rubber Wall Base
2.5" x 3.2mm x 120 ln ft - Coved (with toe)
Covers expansion gap between the floor and the wall
$195.99 $261.32
Weight: 25.00lbs
Duracove Rubber Wall Base
Duracove Rubber Wall Base
6" x 3.2mm x 100 ln ft - Coved (with toe)
Covers expansion gap between the floor and the wall
$264.99 $353.32
Weight: 50.00lbs
Accessories banner
  • Details
  • Shipping Info
  • Maintenance
  • Installation Info
Description - Our Eco-Impact Roll is a low cost plyometric roll with the same important benefits and features as other Impact rolls. This unique alternative to hardwood flooring features a durable vinyl top with a foam backing that is specially constructed to minimize leg stress and injuries. This low cost option provides superior shock absorbency, making it safe for a variety of activities and people of all ages. This rolled vinyl floor maintains structural integrity without compromising a consistent ball bounce or other desirable factors associated with standard gymnasium flooring. While the perfect flooring option for home gyms and yoga studios, we do not recommend using heavy weights on this specialty floor. With many features in one revolutionary product that is backed by a 10 year warranty, this flooring is versatile and perfect for a range of applications.
Material – 2mm Virgin vinyl over top 4.5mm closed cell foam backing.
Width – 5’11” wide roll.
Length – 49’2” long roll.
Thickness – 6.5mm (approx. 1/4 Inch)
Weight – Each roll weighs ~250 Lbs.
Recommended Uses – Our Eco-Impact vinyl flooring sheet has been successfully installed in many spaces to provide a cushioned yet durable flooring solution. This flooring has been used as flooring in gymnasiums, dance studios, yoga rooms, hot yoga room, aerobic rooms, locker rooms, art galleries, kids rooms, equipment rooms, and many other spaces to increase performance while lessening fatigue.
  • Eco-Impact Rolls - Wood Series typically ship within 3-4 business days and deliver within 7-8 business days depending on your location.
  • An email will automatically be sent to you with your tracking information as soon as your roll ships and tracking information becomes available.
Vinyl flooring rolls are easy to clean. Maintenance of this rolled flooring typically includes:
  • Vacuuming any loose crumbs, dirt, dust, or debris from the vinyl floor covering when necessary.
  • Occasional damp mopping of the flooring rolls with a mild soap and water solution. A few recommended soaps are Dawn dish detergent or Tide laundry detergent. Rinse floor thoroughly and allow to dry completely.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.
When installing rolled vinyl flooring, it is recommended that you use some kind of adhesive to prevent the rolls from moving around or sliding apart between adjacent rolls. Here are some common methods of installing vinyl rolls:

A: Double Sided Tape Installation
  • First you will want to clean your sub floor so that it is free of all dust, dirt, and debris.
  • Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for up to 24-48 hours to ensure proper installation of your new flooring.
  • Make any necessary cuts to the rolls to fit them into the room using a Straight Edge and a Utility Knife with a fresh blade.
  • Apply double sided tape to perimeter of each roll.
  • Place rolls back into position on top of the double sided tape.

  • B: Glue Installation
    • First clean your sub floor so that it is free of all dirt, dust and debris. Also, when gluing your flooring down, it is recommended that the sub floor is free of any moisture.
    • Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for up to 24-48 hours to ensure proper installation of your new flooring.
    • Make any necessary cuts to the rolls to fit them into the room using a Straight Edge and a Utility Knife with a fresh blade.
    • Roll up the rolls at one end of the room. Put down a 10 foot long light layer of pressure sensitive adhesive and unroll 10 feet of the flooring into the adhesive at a time.
    • Repeat this step for every 10 feet of roll length until the entire roll has been unrolled into it desired position.
    • After all rolls have been glued down, it is often recommended to use a 100 pound roller on the floor in order to guarantee good adherence to the sub floor. If a roller is not available, walking on the flooring in small choppy steps may also work.

    • C: Heat Welding Instructions
      • Heat welding should be done after the flooring adhesive has set up, usually the following day.
      • Seam edges should be slightly gapped and vertical. Wide gapped or undercut seams will prevent quality welds.
      • The depth of the groove should be 1/2 to 2/3 the thickness of the material. Be careful not to go too deep. The groove should also be centered along the two edges. This is very important to ensure proper strength and bonding of the welding rod.
      • Clean grooves thoroughly of all foreign contamination, including dust.
      • Use only professional quality welding equipment that will maintain sufficient temperatures. Many types, sizes and styles of welding tips are available today. A tip should be chosen to produce a quality weld without damaging the appearance of the sheet vinyl.
      • Preheat welding gun before beginning. Temperature should be set to approximately 750 degrees. It is recommended that the installer perform a test weld on some waste material to verify proper temperature and welding speed prior to welding installed material.
      • Determine the correct welding speed by ensuring that the welding rod actually fuses into the groove. A small ridge should form on either side of the welding rod, at the vinyl surface. If no ridge forms, you have not heat welded the seam.
      • While the welding rod is still warm, trim off 1/2 -2/3 the excess rod with a spatula knife and trim plate in one continuous movement.
      • After the rod has cooled to room temperature, make the final trim pass using only a razor sharp spatula knife in one continuous movement.
      • Apply a glaze to the surface of the trimmed weld. Remove the tip from the welding gun. Hold the gun a few inches above the welded seam and apply hot air along the seam until the surface of the weld rod begins to shine. The shine should not exceed the sheen level of the flooring. The glazed seam will be less porous, smoother, and less noticeable.


  • Shock absorbing and slip resistant.
  • Perfect for light to medium traffic.
  • Ball bounce meets NCAA & DIN standards.
  • Low cost alternative to hardwood flooring.
  • Superior sound absorption offering quieter acoustics.
  • Consistent vertical deformation and ball rebound.
  • 10 year warranty.
  • Heavy weights not recommended.


Customer Questions & Answers

Don't see what you're looking for? 

  • 3
    Is this okay to use on a 40 year old concrete slab? We are in SoCal. Where does this ship from? I looked at some of the other products you have, like the click together product, but they're a bit too thick.
    Our Eco-Impact Roll - Wood Series can be put over a 40 year old concrete slab. This product ships our of NY.
  • 1
    We are interested in installing Eco Impact Rolls on a concrete slab floor, secured with double-sided tape. My question is: is it feasible to remove and re-install Eco Impact rolls if we were to move to a new location?
    If the rolls are only being secured with tape and not glued down, you should be able to remove these and reinstall in the future.
  • 0
    I have previously asked another question. This one is about the wood rolls. Which impact wood roll would be best for a high traffic kitchen floor? Thank you
    Either would work fine, as they are both non-porous and have a padded bottom for added comfort.
  • 0
    Is this floor slippery for dogs?
    Our Eco-Impact rolls have a bit of a textured surface unlike some laminate floors which dogs tend to slip on.
  • 0
    Is this flooring appropriate to use in a shower room? It would abut the tile in a roll in shower stall.
    Our Eco-Impact Roll - Wood Series rolls would work as flooring in a shower room. This floor is water resistant and slip resistant.
  • 0
    What's the difference between the regular and eco?
    The difference between the Eco-Impact Rolls - Wood Series and the standard Impact Rolls - Wood Series is the backing. The Eco version has a foam backing, while the standard version has a rubber backing.
  • 0
    If I am using this for dance flooring (particularly for ballet) Will I need to put foam tile inserts in between the eco and the concrete floor?
    You can use our home dance subfloor tiles if you would like that extra support.

Ask a Question


Verify that you are human, choose: Woman


Customer Reviews

results 1-3 of 3

We'd love your feedback! Write a Review
Average Rating

  Looks amazing
Self-installed in Home Gym
from Albany, NY wrote...
We bought this and love the product. It looks great, feels great, and turned our home gym into a first class looking gym. The only downside was we only needed about 180 sf so we have quite a bit extra. We will find a place to use the remainder eventually I am sure but the flooring itself is great.
  Eco-Impact Roll - Wood Series
Self-installed in Spiritual center
from San Rafael, CA wrote...
Great flooring option. We needed a pad to reduce leg strain for dancing on a concrete floor. Hardwood flooring was beyond our budget, so we were thrilled to get the comfort and sound insulating qualities of a padded floor with the look of hardwood. I wondered if the eco rolls would give a "squishy" feeling to walk on, being a rubber pad, or maybe there would be dimpled impressions left from the chairs we sometimes use but neither of these is the case, the floor is hard like a gym floor. Installation took about 6 hours with myself and a helper for a 560 sq.ft. room. (That's not including the 48-72 hours required to let it unroll itself after fitting it to the space). I used double sided carpet tape to secure the edges to the concrete subfloor, and a heavy-duty vinyl molding trim for the edges where people step on/off the dance floor. It looks so great we are thrilled
  vinyl look
Installed in I haven't gotten the roll yet.
from apopka florida wrote...
I was looking for plank vinyl flooring, and watching the video I find that the roll flooring is exactly what I need for my den. It will save me a lot of money in cleaning . I definitely would recommend this product.
results 1-3 of 3
Your item was successfully added to cart


$0.00 $0.00