Complete Your Order
Contact Us
 
8am - 8pm EST Monday - Friday
10am - 7pm EST Saturday
 

1/2" Pre-Cut Mega Rubber Rolls

★★★★★
Price from
$2.53 sqft
$151.65 roll
reg: $3.37 sqft
roll: $202.20

Proudly made in the USA
AVAILABLE FOR ORDER
Ships between Apr 26 - May 3
Selected Color: 
roll over image to magnify
Black1/2" Pre-Cut Mega Rubber Rolls
Black 1/2" Pre-Cut Mega Rubber Rolls Black
Blue - 10%1/2" Pre-Cut Mega Rubber Rolls
Blue - 10% 1/2" Pre-Cut Mega Rubber Rolls Blue - 10%
Gray - 10%1/2" Pre-Cut Mega Rubber Rolls
Gray - 10% 1/2" Pre-Cut Mega Rubber Rolls Gray - 10%
Blue Gray - 10%1/2" Pre-Cut Mega Rubber Rolls
Blue Gray - 10% 1/2" Pre-Cut Mega Rubber Rolls Blue Gray - 10%
Lipstick Red - 10%1/2" Pre-Cut Mega Rubber Rolls
Lipstick Red - 10% 1/2" Pre-Cut Mega Rubber Rolls Lipstick Red - 10%

 
  • Details
  • Shipping and Returns
  • Maintenance
  • Installation Info
Description - Get our most popular rubber floor for Olympic lifting in pre-cut sizes with our 1/2” Pre-Cut Mega Rubber Rolls. These rubber rolls are great for any commercial gym, CrossFit gym, and the like and are ready to ship quick. A 5-year warranty backs these rubber floor rolls.
Material – Recycled rubber buffings and colored EPDM virgin rubber flecks. Rubber buffings are the “Filet Mignon” of the recycled rubber industry due to the fact that they are the cleanest, strongest, and most consistent recycled rubber material available as compared to some of the low cost recycled crumb rubber alternatives available.
Size – 4' x 10', 4' x 15', 4' x 25', 4' x 50'.
Thickness – 1/2 Inch
Weight – Our 4' x 10' rolls weigh 120 Lbs, our 4' x 15' rolls weigh 180 Lbs, our 4' x 25' rolls weigh 300 Lbs, and our 4' x 50' rolls weigh 600 Lbs.
Spec Sheet - Printable Spec Sheet.
Recommended Uses – Our 1/2" Pre-Cut Mega Rubber Rolls are the perfect flooring option for anywhere heavy weights are dropped. These rolls have been used in commercial gyms, CrossFit gyms, in garage gyms, as non-slip flooring for walkways, and much more.

Available For Order - Ships between Apr 26 - May 3

rubber rolls are easy to clean. Maintenance of this rolled flooring typically includes:
  • Vacuuming any loose crumbs, dirt, dust, or debris from the rubber floor covering when necessary.
  • Occasional damp mopping of the flooring rolls with a mild soap and water solution. A few recommended soaps are Dawn dish detergent or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.

For more detailed cleaning instructions and commercial cleaning instructions, Click Here.

When installing rolled rubber flooring, it is recommended that you use some kind of adhesive to prevent the rolls from moving around or sliding apart between adjacent rolls. The most common methods of adhering rubber rolls to the sub floor are:

A: Double Sided Tape Installation
  • First you will want to clean your sub floor so that it is free of all dust, dirt, and debris.
  • Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for up to 24-48 hours to ensure proper installation of your new flooring.
  • Note: Rolls may be directional so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure color matches.
  • Make any necessary cuts to the rolls to fit them into the room using a Straight Edge and a Utility Knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
  • Apply double sided tape to perimeter of each roll.
  • Place rubber rolls back into position on top of the double sided tape.

  • B: Glue Installation
    • First clean your sub floor so that it is free of all dirt, dust and debris. Also, when gluing your flooring down, it is recommended that the sub floor is free of any moisture.
    • Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for up to 24-48 hours to ensure proper installation of your new flooring.
    • Note: Rolls may be directional so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure color matches.
    • Make any necessary cuts to the rolls to fit them into the room using a Straight Edge and a Utility Knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
    • Roll up the rolls at one end of the room. Put down a 10 foot long light layer of polyurethane adhesive and unroll 10 of the flooring into the adhesive at a time.
    • Repeat this step for every 10 feet of roll length until the entire roll has been unrolled into it desired position.
    • After all rolls have been glued down, it is often recommended to use a 100 pound roller on the floor in order to guarantee good adherence to the sub floor. If a roller is not available, walking on the flooring in small choppy steps may also work.

    • For printable installation instructions, please Click Here.

Highlights


  • Great for commercial and CrossFit gyms.
  • Ultra durable rolled rubber designed for extreme use.
  • 5 year warranty.
  • Easy to clean and maintain.
  • Mold and mildew resistant.

Videos

Customer Questions & Answers


Don't see what you're looking for? 
Are the 10' precut rolls cut square so that multiple rolls can be installed seamlessly?
Our 1/2" Pre-Cut Mega Rubber Rolls are not trued, so they will not be exactly 4' wide and won't be 10' long as well. They can be cut to fit so that multiple mats can be installed next to each other as they will be virtually the same size just like our standard rubber rolls. We do leave an extra few inches at the end of each roll because no room is perfectly straight. This ensures that you can install your flooring to fit the space you are trying to fill.
What is the easiest way to make a straight cut on the 1/2" Mega Rubber Roll?
The easiest way to cut our 1/2" Mega Rubber Rolls is with a sharp utility knife and a straight edge. Always make sure you measure twice and cut once to make sure your cuts are as accurate as possible.
Would the 1/2" Mega Rubber Roll flooring work in a Facility Kitchen Dish Washing Room?
You can use our Mega Rubber Rolls in a dishwashing room. Our rubber flooring is very slip-resistant and is actually more slip-resistant when wet. These rolls are somewhat porous, so we would recommend if there is any grease that can be spilled to seal the floor with our rubber floor finish and sealer. This will help to keep the grease from getting into the flooring and prevent it from breaking the flooring down over time. Cleaning of our rubber flooring is very easy with a mild soap and water solution and a synthetic mop head.

results 1-3 of 3

Customer Reviews

results 1-4 of 4

We'd love your feedback! Write a Review
Average Rating
4.8/5.0

  Great for a home strong man gym
Self-installed in man cave/ home gym
from Pawleys Island, SC wrote...
I love the flooring, it stands up to my strong man and power lifting work outside. The only thing I do not like are the end cuts. when fitting two rolls together, the ends are not cut straight, so there are gaps in between the rolls. I had to recut all of the ends to get a tight fit, now I have to make the area 4 inches shorter to get a clean edge.
  Just What I Wanted
Self-installed in home gym
from York, Pa wrote...
Worth the effort to install. Perfect floor for home or commercial gym. Love the look and performance.
  1/2" rolled rubber gym floor
Self-installed in Gym
from Needham, MA wrote...
I was very happy with the product. It's beefy and was easy to install. The product came when they said it would, and was better than I expected. One caution, have someone available to help you, each roll weighs about 200 pounds!
  tough, resilient, perfect!
Self-installed in business
from Chatsworth CA wrote...
I've been looking for the perfect material for one of my machine operations. I needed something tough and resilient to cushion a 4 ton press operation and didn't know what to use. Luckily for me I came across you folks and my problem disappeared! It's absolutely perfect and now I'm making a list of other areas that I can use your material. I will be placing another order and by the way, I was treated very well by your customer service, I wish I remembered her name (I'm sure you can look her up) because she was delightful and very knowledgeable. Thank you very much!
results 1-4 of 4
Your item was successfully added to cart
Large Product Image

Color:
Qty:

$0.00 $0.00