Description - Get the most popular thickness for mats now in an easy to install interlocking style with our 3/4” Interlocking Premium Extreme Mats. These mats are great for any CrossFit gym or Olympic Lifting gym and are very easy to clean and maintain. These rubber mats are very shock absorbent and are backed by a 5-year warranty. Resistant to mold, mildew, and bacterial growth, make these mats some of the most hygienic mats on the market.
Note: - Due to the manufacturing process and nature of recycled rubber, some surface variations such as color distribution or shadowing may exist and tile thickness may vary. Shims may be provided free of charge to assist with any tile thickness issues.
Material – Interlocking rink mats are constructed of recycled black rubber buffings and virgin colored rubber flecks at a 25% and 75% color density. These recycled rubber tiles are also vulcanized which means they are formed using heat and pressure to form a solid non porous and non absorbent mat surface.
Size – 4’ x 6’ (interlocked size - 45.125" x 69").
Thickness – 3/4 Inch.
Weight – Each 3/4" mat weighs approximately 105 Lbs.
Recommended Uses – Our 3/4" Interlocking Premium Extreme Mats are the perfect flooring option for anywhere heavyweights are dropped. These rubber mats are commonly used as flooring in Olympic lifting areas of commercial gyms, in CrossFit gyms, as flooring in ice rinks, in garage gyms, and much more.
Available For Order - Ships between Apr 17 - 24
Interlocking Rink Mats are very easy to maintain and keep clean. Maintenance of these interlocking gym tiles typically includes:
- Vacuuming any loose crumbs, dust, or debris from the tile flooring surface when necessary.
- Occasional damp mopping of the floor tile with a mild soap and water solution. A few recommended soaps are Dawn dish detergent or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.
For more detailed cleaning instructions and commercial cleaning instructions, Click Here.
Installation of interlocking mats is very simple and typically done by the consumer. Typical installation of these mats is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add borders tiles outward along the adjacent walls. Add center, corner and border tiles where you see fit.
- After the field is covered, go back and cut in tiles along the opposite walls in the room. It is recommended to leave a gap along the wall roughly the thickness of the tiles being used to account for expansion and contraction of the floor in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.
For printable installation instructions, please Click Here.