Customer Questions
Don't see what you're looking for?
Can these mats be cut to fit? My max space is 33” deep and 53” wide.
Vickie Hohauser
Our Washer/Dryer Mats can be cut to fit with the use of a sharp utility knife and a straight edge. Since these mats are thick and are vulcanized, it will take a few passes with the knife to get through the mats, but you can cut these pretty easily with it.
Do not have a vibration problem, but the floor beneath the washer/dryer gets awfully dirty.
I have new flooring put into the house and wanted to use to protect the floor. Can these mats serve this purpose?
Sam
You can use our Washer/Dryer Mats as a floor protector for the new flooring under your washer and dryer.
Do these have any metal that will scratch a coated concrete floor? Looking for something not made from old tires that has pieces of metal belts that ruin floors.
well shaken
Our Washer/Dryer Mats are made from the treads of recycled truck tires. This part of the tire does not inherently have any metal, but since these are cut in areas that will also cut down whole tires, metal can find its way into the mix. To ensure that the metal shavings are removed, our rubber flooring is ran through magnets to ensure that all metallic material is removed. This ensures that your Washer/Dryer mat will not scratch up your nice floor.
What is the weight restriction? I have a washer with a pedestal washer totaling 305 pounds.
Texastoast
There is no weight restriction for our Washer/Dryer Mats. These mats are the most durable on the market and can handle a car sitting on them.
Do I need one mat for each washer and dryer, or will one serve both if they sit side by side?
Terri Meeks
Our Washer/Dryer Mats are made to fit under one washer or dryer. If you need a mat to fit under both, you would want to purchase our two-pack mat option.
what are the dimensions of this mat (length and width)?
Single mats are 28" x 34".
Will the rubber ruin/soften the finish on pre-finished hardwood flooring?
Kristi Morisi
The rubber used to make our Washer/Dryer Mats will not soften or ruin the finish on pre-finished hardwood flooring. If you are concerned that the mat will cause staining, we recommend placing a plastic sheet or mat protector under the mat.
Do the mats give off fumes smelling of rubber? If so, for how long?
Kristi Morisi
Our Washer/Dryer Mats do have a strong rubber smell to them. To help mitigate this, we recommend mopping the mat with a mild soap and water solution with a synthetic mop head. You then will want to let the mat to air dry in a well-ventilated area. You may need to repeat this process a few times to get the smell to dissipate fully.
Are there any installation tips or videos?
charles biada
These mats are very straight forward when placing our Washer/Dryer Mats under your washer or dryer. You just lift the washer or dryer up and then place the mats under them.
Can I use this mat on an engineered hardwood surface? My washer-dryer is stacked in a closet in the kitchen and has engineered hardwood flooring. Looking for a solution to protect the flooring.
Nan
Our Washer/Dryer Mats can be used over hardwood flooring without damaging or staining it. If you are concerned, we recommend placing a plastic sheet under the mats to protect the wood flooring underneath.
Is your listing for one mat, or is it sold in pairs?
Tony
You can buy our Washer/Dryer Mats as a singular mat or as a pair of mats.
How do I install these pads?
Michelle
Installing our Washer/Dryer Mats is super easy. All you would need to do is roll or lift your washer and dryer from their current resting spot. Place the mats, and then roll or lift the washer and dryer mat onto the mats. No glue or tape is necessary.
Another question, with vibration, do the mats leave a residue of black rubber on the floor? Would it be advisable to put a carpet pad between the mat and the floor?
E Blaustein
Our Washer/Dryer Mats won't leave a mark on the flooring they are placed over. If you are concerned they will, we recommend placing a plastic sheet under the mats.
No results found.
1
...
...
