Eurasia Porcelain Tile

Price from
$4.63 sqft
$82.01 case, covers 17.70 sqft
reg: $6.17 sqft
case: $109.35

Random variation
Ships between Aug 29 - 31
Color: roll over image to magnify

15 tiles per case
13" x 13"
Accessories for Eurasia Porcelain Tile
Transitions tile flooring from the floor to the wall
3" x 13"
$23.99 $31.99 Weight: 1.00lbs
Transitions tile flooring from the floor to the wall
Cove Base
6" x 13"
$21.99 $29.32 Weight: 1.00lbs
Fills the corner where cove base come together
Cove Base Outcorner
1" x 6"
$19.99 $26.65 Weight: 1.00lbs

Description - Combining random shading and beautiful veining for a natural look, getting the real stone look has never been easier to achieve. Eurasia porcelain tiles feature HD technology for the truest looking replication of natural stone in a porcelain tile. Available in multiple sizes and color options, this textured tile is the perfect flooring solution to make a bold and beautiful statement in any room.
Material – Glazed Porcelain with HD technology and textured surface.
Size – Available as 13" x 13", 12" x 24", and 18" x 18" tiles.
Thickness – 5/16" (8mm)
Shade Variation – Random (V4)
Minimum Grout Joint Recommendation – 3/16"
Application – Floors and walls.
Breaking Strength – >350 lbs.
Suggested Patterns – Diamond, Offset, or Grid.
Weight – Each 13x13 case weighs ~61 lbs, each 12x24 case weighs ~56 lbs, and each 18x18 case weighs ~64 lbs.
Recommended Uses – Eurasia porcelain tiles are recommended for installation in homes, hallways, entryways, studios, salons, and more.

  • Porcelain tile flooring typically ships within 5-7 business days and typically delivers within 7-15 business days.
  • Once your flooring ships, an email will be automatically sent to you with your tracking information.

Porcelain tiles are easy to keep clean and maintain. Maintenance of the floor typically includes:
  • Daily or weekly vacuuming or mopping of dirt, grit, dust etc.
  • Place door mats at all entrances to prevent tracked in dirt, rocks, moisture, and other debris.
  • Glazed tiles should be cleaned routinely with an all-purpose, low VOC household or commercial cleaner.
  • The entire area should be cleaned and scrubbed with cleaner solution by using a cotton mop, cloth, sponge, or non-metallic brush.
  • Routine cleaners should never contain hazardous or polluting products including, but not limited to acids or ammonia. Acids can damage the grout and the glazed surface of the tile, while ammonia can cause discoloration of grout.
  • When complete, be sure to rinse the entire area with clean water to remove all cleaning solution residue.
  • For detailed cleaning instructions, please Click Here.

General instructions for installing floor tile:
  • Tile must be installed over structurally sound substrates. Any damaged, loose or uneven areas must be repaired, patched and leveled.
  • Start by marking the center point of the room. Place a row of loose tiles along the center lines in both directions, leaving enough space for uniform joints (use tile spacers).
  • Using the notched side of the recommended trowel, comb adhesive into standing ridges by holding trowel at a 45-degree angle. Remove excess adhesive, leaving a uniform, ridged setting bed. Never spread a larger area than can be set in 15 minutes.
  • Measure tiles to be cut carefully and mark with a pencil or felt-tip pen. Make straight or diagonal cuts with a tile cutter and curved cuts with a nipper. Be sure to mix tiles from several cartons as you set, for a blended effect.
  • Begin installation in the center of the room. Finish each grid before moving to the next. Start with the first tile in the corner of the grid and work outward. Set tiles one at a time using a slight twisting motion. Insert tile spacers as each tile is set. Fit perimeter tiles in each grid last, leaving 1/4" gap between tile and wall.
  • When grid is completely installed, tap in all tiles with a rubber mallet or hammer and wood block, to ensure a good bond and level plane. Remove excess adhesive from joints with a putty knife, and from tile with a damp sponge.
  • Do not walk on tiles until they are set (usually in 24 hours).

Tips for installing large format floor tile:

  • Large size floor tile installation requires particular attention to proper subfloor preparation, grout joint sizing, trowel selection, and mortar coverage.
  • It is absolutely critical that large tile be installed on a level substrate.
  • Installation Requirement: For proper bonding, medium bed mortar should be used in installing tiles with a dimensional length greater than 15 inches on any one side of the tile. Back buttering tiles of this nature in the installation process will also assure proper coverage for body.
For detailed installation instructions, please Click Here.

For printable warranty information, please Click Here.


  • Realistic look of natural stone.
  • Featuring HD technology.
  • Textured surface.
  • Mix and match sizes and color options for a unique look.
  • Residential & commercial uses.


How to Install Floor Tile

Top 5 Tips for Installing Large Format Tiles

Shipping Video


Customer Questions & Answers

Don't see what you're looking for?

Ask a Question


Verify that you are human, choose: Lock


Want immediate answers?

Live Chat! Get assistance from our sales team! 
< Return to Product